Room Availability Light Bar for TSW-560, TSW-560P, & TSW-560-NC Series, White
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
Adds 180° visual indication of room availability to a TSW-560, TSW-560P, or TSW-560-NC series touch screen.
The TSW-560-LB Series light bar is an add-on accessory for a TSW-560, TSW-560P, or TSW-560-NC series touch screen to provide 180° visual indication of the room availability status. With just a glance down the hallway, the light bar provides highly-visible indication of a room’s availability as part of a complete Crestron® enterprise room scheduling solution. It mounts to the rear of the touch screen and provides a ring of light around the perimeter of the touch screen. Its clean, stylish appearance and vivid color illumination complement any corporate office environment.
Room Availability Status
For room scheduling applications, the TSW-560-LB requires no special programming or configuration. The color of illumination is controlled by the room scheduling application, which runs on the touch screen and syncs with the Crestron Fusion® Enterprise Management Service or other supported calendaring application. It illuminates green when the room is available and red when the room is occupied. It can also blink to indicate an emergency message broadcast from Crestron Fusion.
Custom RGB Color Mixing
For custom applications, the TSW-560-LB can be programmed to illuminate in any desired color. Its tricolor RGB LEDs allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments per color. Custom RGB color mixing is performed through programming of the Crestron control system controlling the touch screen. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.
Key Features
- Adds 180° visual indication of room availability to a TSW-560, TSW-560P, or TSW-560-NC series touch screen
- Reveals every free meeting room at a glance down the hallway
- Provides a stylish ring of light around the perimeter of the touch screen
- Illuminates vivid green or red to indicate room availability status
- RGB LEDs allow any color illumination (except white) via custom control system programming
- Energy efficient at less than 2 Watts power consumption
- Mounts easily to the rear of the touch screen and connects via USB[1]
- Compatible with in-wall and multisurface mounting options
| Indicator |
| Illumination |
RGB LED |
| Functionality |
Supports alternating red/green indication of room availability status for room scheduling; supports RGB color mixing via custom control system programming |
| Communications |
| USB |
USB 2.0 device for connection to a TSW-560, TSW-560P, or TSW-560-NC series touch screen |
| Connectors |
| USB |
(1) Attached lead with USB Type A connector, male;
USB 2.0 device port [1];
Connects to the USB host port on the touch screen |
| Flex Circuit Slot |
Attaches the light bar panel to the control module |
| Power |
| USB Power |
2.5 Watts |
| Power Consumption |
1.3 Watts typical |
| Environmental |
| Temperature |
41 to 113 °F (5 to 45 °C) |
| Humidity |
10% to 90% RH (non-condensing) |
| Heat Dissipation |
5 BTU/hr |
| Construction |
| Composition |
Two-piece assembly composed of a control module and light-diffusing plastic light bar panel |
| Mounting |
Control module attaches to the rear of the touch screen using screws, light bar panel sandwiches between the touch screen and mounting surface, 2-13/16 in. (72 mm) minimum mounting depth, compatible with TSW-UMB-60-PMK preconstruction mounting kit, TSW-UMB-60-BBI wall mount back box, and TS-5-MSMK multisurface mount kit (not compatible with the TSW-560-TTK series tabletop kit or TSW-560/760-RMK-1 rack mount kit) |
| Dimensions |
| Height |
3.48 in. (89 mm) |
| Width |
6.06 in. (154 mm) |
| Depth |
0.59 in. (15 mm) |
| Dimensions shown are for the complete touch screen and light bar assembly; projects 0.6 inch (15 mm) from the mounting surface |
| Weight |
| 2.26 oz (64 g) |
| Compliance |
| CE, IC, FCC Part 15 Class B digital device |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.