Online Help

Products

    Pages

        Master photo:TST-902-DSW
        Add to Favorites

        TST-902-DSW

        Wall Dock for TST-902

        Provides a convenient in-wall charging solution for the TST-902 Wireless Touch Screen.

        Have a question?
        Add to a Project
        Find a Dealer

        The TST-902-DSW is an optional wall dock for the TST-902 Wireless Touch Screen. Placing the touch screen into the wall dock enables its use as a stationary touch screen while simultaneously charging its internal battery.

        When docked in the TST-902-DSW, the touch screen sits nearly flush with the outer bezel, affording a clean appearance while inhibiting unauthorized removal. By entering a passcode or pressing a button on the touch screen, the mechanism gently tilts the touch screen outward, allowing it to be released for wireless use. A hardware key is included to release the touch screen in the event of a power failure.

        The TST-902-DSW is designed for flush-mount installation in a flat, vertical wall structure.[1] Installation requires additional hardware (sold separately). Pre-construction back boxes are available for both framed and masonry construction. Pre- and post-construction mounting kits are also available for applications that do not require a back box.

         
        1. The TST-902-DSW docking mechanism is designed for proper operation when mounted in a vertical orientation as in a typical wall. The maximum allowable tilt is 16° back. The mechanism will not eject properly at an angle greater than this.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Connectors
          24 VDC (1) 2-pin 3.5 mm detachable terminal block;
        24 Volt DC power input;
        Wire Size: 18 AWG (0.75 mm²) maximum
        Controls
          OPEN (1) pushbutton, accessible when touch screen is not docked;
        Releases the docking mechanism to allow touch screen to be docked
        Power Requirements
          Cresnet Power Usage 11 Watts (0.46 Amps @ 24 Volts DC) with touch screen docked
          Note: May be powered by Cresnet network power or a dedicated Cresnet power supply. Does not support Cresnet data communication, only power.
        Environmental
          Temperature 41° to 112° F (5° to 45° C);
        50° to 104° F (10° to 40° C) while charging
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 38 BTU/hr (including touch screen)
        Enclosure
          Chassis Metal, flush-mountable in a vertical wall structure [1] (all mounting accessories sold separately)
          Faceplate Plastic, black
        Dimensions
          Height 8.02 in (204 mm)
          Width 11.86 in (302 mm)
          Depth 3.20 in (82 mm)
          Total depth with touch screen docked is ˜3.25 in (83 mm).
        Weight
          5.0 lb (2.3 kg)
        Click here to search product certificates.
        1. The TST-902-DSW docking mechanism is designed for proper operation when mounted in a vertical orientation as in a typical wall. The maximum allowable tilt is 16° back. The mechanism will not eject properly at an angle greater than this.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.