Control Engine |
Crestron 4-Series™; real-time, preemptive multi-threaded/multitasking kernel;
Transaction-Safe Extended FAT file system |
Communications |
Ethernet |
100/1000 Mbps, auto‑switching, auto‑negotiating, autodiscovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption,IPv4 or IPv6, HTTPS web server, SMTP email client1 |
Cresnet® Network |
Cresnet server mode |
USB
|
Supports USB mass storage class devices via the bottom panel USB 2.0 host port, supports computer console via the front panel USB 2.0 device port |
RS-232/422/485 |
For 2-way device control and monitoring, supports RS-232, RS-422, or RS-485 up to 115.2k baud with hardware and software handshaking |
IR/Serial |
Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0–5V) up to 115.2k baud |
BACnet™ network/IP |
Supports up to 500 BACnet objects |
Memory |
SDRAM |
2 GB |
Flash |
8 GB |
Memory Card |
Supports microSD® cards up to 32 GB (4 GB included)
|
External Storage |
Supports USB storage devices up to 1 TB |
Connectors and Card Slots |
I/O 1–8 |
(1) 9-pin 3.5 mm detachable terminal block;
Comprises (8) Versiport digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0–24VDC, input impedance 20k Ω, logic threshold >3.125V low/0 and <1.875V high/1;
Digital Output: 250 mA sink from maximum 24VDC, catch diodes for use with real world loads;
Analog Input: Rated for 0–10VDC, protected to 24VDC maximum, input impedance 21k Ω with pull-up resistor disabled;
Programmable 5V, 2k Ω pull-up resistor per pin |
MEMORY |
(1) microSD memory card slot;
Accepts one microSD card up to 32 GB for storage of log files;
4 GB microSD card included |
IR/SERIAL 1–4 |
(1) 8-pin 3.5 mm detachable terminal block;
Comprises (4) IR output ports;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0–5 V) up to 115.2k baud;
IRP2 IR emitters sold separately |
RELAYS 1–4 |
(1) 8-pin 3.5 mm detachable terminal block;
Comprises (4) normally open, isolated relays;
Rated 1 A, 30VAC/VDC;
MOV arc suppression across contacts |
COMPUTER |
(1) USB Type-B connector, female;
USB 2.0 computer console port;
For setup only |
PWR |
(1) 2-pin 3.5 mm detachable terminal block;
24VDC power input for power pack (sold separately) |
NET |
(2) 4-pin 3.5 mm detachable terminal blocks, paralleled;
Cresnet server ports |
COM 1–2 |
(2) 5-pin 3.5 mm detachable terminal blocks;
Bidirectional RS-232/422/485 ports;
Up to 115.2k baud; hardware and software handshaking support |
G |
(1) 6-32 screw;
Chassis ground lug |
USB |
(1) USB Type-A connector, female;
USB 2.0 port for storage devices |
LAN PoE |
(1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port;
PoE (Power over Ethernet) PD (Powered Device) port |
Controls and Indicators |
PWR |
(1) Bicolor green/amber LED, indicates operating power is present;
Amber indicates that the device is booting and is not yet ready to operate;
Green indicates that the device is ready to operate |
NET |
(1) Amber LED, indicates communication with Cresnet devices |
MSG |
(1) Red LED, indicates control processor has generated an logging message |
HW-R |
(1) Recessed miniature push button, initiates hardware reset and factory reset;
Hardware reset: Press HW-R one time;
Factory reset: Press HW-R and then press SW-R three times
|
SW-R |
(1) Recessed miniature push button, initiates software reset and password reset;
Software reset: Press SW-R one time;
Password reset: Press and Hold SW-R (about 15 seconds) until the MSG LED flashes rapidly |
LAN |
(1) Green and (1) Amber LEDs;
Green LED indicates Ethernet link status and connection speed;
Amber LED indicates Ethernet activity |
Power |
Power Source Options |
Power supply (sold separately) or PoE (Power over Ethernet) |
Power Supply |
Must supply 24VDC to 2-pin terminal block via flying leads;
Use model DIN‑PWS30‑277or equivalent |
Power over Ethernet |
IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95W) PoE Powered Device |
Available Cresnet Power |
2.5 W maximum when powered via PoE;
20 W maximum when powered via DIN‑PWS30‑277
|
Power Consumption |
9.7 W (not including any connected Cresnet devices) |
Environmental |
Temperature |
41° to 113°F (5° to 45°C) |
Humidity |
10% to 90% RH (noncondensing) |
Heat Dissipation |
33 BTU/hr |
Enclosure |
Housing |
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated |
Mounting |
35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm) |
Dimensions |
Height |
3.57 in. (91 mm) |
Width |
6.33 in. (161 mm) |
Depth |
2.28 in. (58 mm) |
Weight |
9.8 oz (277 g) |
Compliance |
Regulatory Model: DIN‑AP4
UL® Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device
|