Master photo:C2N-IO
Add to Favorites

C2N-IO

Control Port Expansion Module

An outboard module for adding control ports to a Crestron® touch screen control system or any other Crestron control systems.

Have a question?
Add to a Project
Find a Dealer

The C2N-IO is a very compact device that adds control ports to any Crestron 2-Series 3-Series®, or 4-Series® control system. It connects via the Cresnet® control network and provides one RS-232, one IR, and two relay control ports.1 It can be mounted to any flat surface using two screws or adhesive reclosable fastener (3M® Dual Lock® included).

 
Key Features
  • Fits within a 2-gang wall box
  • Provides 1 RS-232, 1 IR/serial, and 2 relay ports1
  • Compatible with any Crestron 2-Series, 3-Series®, or 4-Series® control system
  • Interfaces via the Cresnet® control bus
  • 24 VDC Cresnet powered
  • Surface mount bracket included
  1. The RS-232 COM port is intended for use with relatively simple devices that send and receive small packets and do not generate a lot of data. A small amount of delay may be normal when sending or receiving some control commands on a low-speed serial network. Cresnet networks with many devices tend to exhibit more delay.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

The original language version of this document is U.S. English. All other languages are a translation of the original document.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, 3-Series, 4-Series, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. 3M and Dual Lock are either trademarks or registered trademarks of 3M Company in the United States and/or other countries. Intertek is either a trademark or registered trademark of Intertek Group in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2024 Crestron Electronics, Inc.

 
CrestronHome AVF Works With (2)
Communications
  Cresnet® Network Cresnet client mode, 2-Series, 3-Series®, or 4-Series® control system compatible
  RS-232 Supports 2-way device control and monitoring up to 115.2k baud with software
handshaking 1
  IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 VDC) up to 115.2k baud
Connectors
  RELAY 1 – 2 (1) 4-pin captive screw terminal block comprising (2) normally open, isolated relays;
Rated 1A, 30 VAC/VDC;
Solid-state arc suppression across contacts
  COM (1) 3-pin captive screw terminal block, bidirectional RS-232 port 1;
Up to 115.2k baud; software handshaking support
  IR (1) 2-pin captive screw terminal block, IR/Serial output port;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
  NET (2) 4-pin captive screw terminal blocks, paralleled
Cresnet client port, connects to Cresnet control network
Controls and Indicators
  NET ID (2) Rotary switches for manually setting Cresnet ID;
'00' setting enables touch-settable ID (TSID)
  PWR (1) Green LED, indicates operating power supplied via Cresnet control network
  NET (1) Amber LED, indicates communication with Cresnet system
  SETUP (1) Red LED and (1) recessed miniature pushbutton for TSID
Power Requirements
  Cresnet Power Usage 2.5 W (105 mA @ 24 VDC)
Environmental
  Temperature 32° to 104° F (0° to 40° C)
  Humidity 10% to 90% RH (noncondensing)
  Heat Dissipation 3.5 BTU/hr
Construction
  Metal, freestanding or surface mount, surface mount bracket and 3M® Dual Lock® reclosable fastener included, fits inside a 2-gang electrical box or 2-gang UK (BS 4662) electrical box
Dimensions
  Height 2.25 in. (58 mm)
  Width 3.50 in. (89 mm), 4.38 in (112 mm) with bracket
  Depth 0.83 in. (21 mm)
Weight
  2.7 oz (75 g)
Compliance
  Regulatory Model: C2N-IO
FCC Part 15 Class B, IC Class B, CE, Intertek® Listed for US and Canada
Click here to search product certificates.
  1. The RS-232 COM port is intended for use with relatively simple devices that send and receive small packets and do not generate a lot of data. A small amount of delay may be normal when sending or receiving some control commands on a low-speed serial network. Cresnet networks with many devices tend to exhibit more delay.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

The original language version of this document is U.S. English. All other languages are a translation of the original document.

The product warranty can be found at www.crestron.com/warranty.

The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

Crestron, the Crestron logo, 3-Series, 4-Series, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. 3M and Dual Lock are either trademarks or registered trademarks of 3M Company in the United States and/or other countries. Intertek is either a trademark or registered trademark of Intertek Group in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2024 Crestron Electronics, Inc.

Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.