Crestron Connect It™ Cable Caddy w/120V Outlet, No Cables, Black Textured
A cost-effective, simple to use tabletop presentation interface offering connectivity and one-touch control in a compact, stylish device that's easy to install.
The TT‑100‑B‑T is a presentation solution that provides connectivity, cable management, and one-touch control, all in an easy‑to‑install tabletop device. Several cable caddies can be installed in a tabletop to allow multiple users to connect video sources to a single switcher underneath (sold separately). One-touch control at each cable caddy makes selecting between sources simple.
Switching Between Presenters
Starting a presentation and switching between presenters is easy and intuitive. Simply connect a source and the room display automatically turns on and displays that source. Another presenter can take over the presentation from an additional cable caddy via the soft-touch capacitive buttons. Multicolored lights surrounding each button indicate when a source is connected, ready, and being displayed.
Multiple Connections
The Crestron Connect It Cable Caddy provides four pass-through openings for easy pull-out interface cables such as HDMI®, USB, Audio, and Ethernet (not included).
Simple Installation
Mounting the cable caddy only requires a 4 in. (102 mm) round hole through the tabletop surface. The caddy is secured in place with a single twist-on locking ring, which features three lock-down screws to prevent the device from coming loose.
Key Features
- Simple-to-use tabletop presentation interface
- Soft-touch capacitive buttons with multicolored status indicators
- Recessed cable storage compartment
- 120VAC power outlet
- Compact and easy to install
- Integrates with control systems and AV signal extender endpoints
| Controls & Indicators |
| |
"Connect It" Buttons |
(2) Soft-touch capacitive buttons;
Press either button to select the connected video source for viewing on a display device |
| |
"Connect It" Indicators |
(2) Multicolored LED indicators:
Blue (solid) – Indicates no video source is connected;
Green (blinking) – Indicates a video source is connected and the display device is powering up;
Green (solid) – Indicates the connected video source is selected for viewing on the display device;
Green (slow pulse) – Indicates a video source is connected but not currently selected for viewing;
Red (blinks 5 times) – Indicates one of the “Connect It” buttons has been pressed but no video source is connected |
| Communications |
| |
Cresnet® |
Cresnet secondary mode |
| Connections – Top |
| |
Cable Storage Compartment |
Provides pass-through holes for up to four cables (cables not included) |
| |
AC Power Outlet |
(1) NEMA 5-15R grounded AC power receptacle;
Maximum Load: 10 Amps @ 125 Volts AC, 50/60 Hz |
| Connections – Bottom Panel |
| |
NET |
(1) 4-pin 3.5 mm detachable terminal block;
Cresnet secondary port |
| |
USB |
Not used |
| |
Utility Power |
(1) 9 ft (2.7 m) AC line cord with NEMA 5-15P grounded plug;
Passes through to front panel AC power outlet |
| Power Requirements |
| |
Cresnet Power Usage |
1.2 Watts (0.05 Amps @ 24 Volts DC) |
| |
Utility Power |
10 Amps at 125 Volts AC 50/60Hz |
| Environmental |
| |
Temperature |
32° to 112° F (0° to 45° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
<0.05 BTU/hr |
| Construction |
| |
Housing |
Plastic |
| |
Mounting |
Flush tabletop mount in a 4 inch (102 mm) round hole, 1/2 to 1-1/4 inch (13 to 32 mm) surface thickness |
| Dimensions |
| |
Height |
3.76 in (96 mm) |
| |
Diameter |
4.71 in (120 mm);
5.90 in (150 mm) with locking ring |
| Weight |
| |
15.3 oz (433 g) without cables |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.