Ethernet to Cresnet Interface
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
CEN-CN is used to connect Crestron network (Cresnet) equipment to a Crestron e-Control™ capable control system through an Ethernet, LAN or WAN. Using standard IP Internet protocol, CEN-CN can transport Cresnet data over Ethernet.
CEN-CN is used to connect Crestron network (Cresnet) equipment to a Crestron e-Control™ capable control system through an Ethernet, LAN or WAN. Using standard IP Internet protocol, CEN-CN can transport Cresnet data over Ethernet.
| Ethernet Protocols |
| | TCP/IP, UDP/IP, ICMP (Ping) and CIP |
| Indicators |
| | PWR | This LED (green) illuminates when operating power is supplied to the CEN-CN. Operating power may be supplied either by the external AC power pack (included) that provides 12VDC or supplied by 24VDC via the 4-wire CEN-CN Cresnet system wiring. |
| | NET | Illuminates when communication with the CEN-CN Cresnet system device is occurring. |
| | RXD
(Ethernet) | Illuminates during reception of Ethernet data. |
| | TXD
(Ethernet) | Illuminates during transmission of Ethernet data. |
| | LNK
(Ethernet) | Illuminates when there are attachments to the Ethernet network. |
| | ERR
(Ethernet) | Illuminates when an Ethernet protocol error is detected. |
| Ports |
| | 12VDC .5A | This DC power socket connector is used to supply power via an external power pack. |
| | PC | This 6-pin, 6-position RJ11 modular jack is used to communicate with a PC when performing the configuration of the CEN-CN or for troubleshooting diagnostics. |
| | NET | The NET 6-pin, 6-position RJ11 modular jack is used for expansion to SmarTouch peripheral(s) or other modular Cresnet slave devices. This port is connected in parallel to the two 4-pin network connectors described as follows.The two NET 4-pin network connectors are used to connect the 4-wire Cresnet devices to the CEN-CN. |
| | ETHERNET | This 8-pin, 8-position RJ45 port connects the unit to a 10BaseT Ethernet/LAN or WAN via a hub. |
| Power Requirements |
| | 12VDC, .5A |
| Dimensions |
| | 1.7" / 4.32cm (H) x
6.94" / 17.63cm (W) x
6.32" / 16.05cm (D) |
| Weight |
| | 1.87lbs (0.85Kg) |
| Model Options |
| All the features of the CEN-CN, with the following exceptions: |
| | CENI-CN | International Version; 220V |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.