Products

    Pages

        MPS-200

        Multimedia Presentation System 200

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        The MPS-200 is a complete presentation control and signal routing solution for boardrooms and classrooms. Integrating the control system, multimedia switcher, audio processor, and amplifier into a single 2-space rackmount package, the MPS-200 eliminates the need for separate components without forfeiting performance or flexibility.

        The MPS-200 is a complete presentation control and signal routing solution for boardrooms and classrooms. Integrating the control system, multimedia switcher, audio processor, and amplifier into a single 2-space rackmount package, the MPS-200 eliminates the need for separate components without forfeiting performance or flexibility.

        System Switcher
        Right out of the box, the MPS-200 provides high-performance switching of 4 video and 4 RGB computer sources to a single projector or flat-panel display. Composite, S-Video, component and RGBHV signals can be routed to the appropriate inputs on the display device, with control of the display provided via Ethernet, RS-232 or IR. Input signal sensing is provided on every video and RGB input to enable auto-switching functionality and provide device power status information to the control system. Selectable sync impedance on the RGB inputs helps accommodate cable runs of varying lengths.

        NEW! RGB Pass-thru mode provides a quick path to integration with the groundbreaking Crestron DigitalMedia™ system. With just a single 15-pin VGA cable connected to a DM-MD6X1 DigitalMedia switcher, DMC-DVI input card, or any other DM product with an RGB input, the MPS-200 automatically routes whatever video signal is selected – whether RGB, component, S-Video, or composite – allowing seamless conversion to digital for distribution to HDTV displays and projectors throughout your facility.

        Touchpanel Output
        A second discrete output is provided on the MPS-200 to feed a preview signal to the system touchpanel or other monitor. This output is controlled separately from the main display output, allowing a different source to be viewed on the touchpanel. The touchpanel connection is facilitated through a choice of QuickMedia® (QM) or Crestron Home® (CH) CAT5 Balanced Video outputs, simplifying wiring to a wide range of Crestron touchpanels. The QM output supports high-resolution RGB and HDTV plus audio, while the CH output is limited to standard video and HDTV only (dependent upon the capabilities of the touchpanel).

        QuickMedia®
        The QM Touchpanel output can also be used to feed signals straight to the primary display device, providing a very streamlined, low-cost, long-distance wiring solution. The Crestron exclusive QuickMedia transport transmits high-resolution RGB, HD video, stereo program and microphone audio signals up to 450 feet over a single inexpensive CAT5e type cable[1]. Just one CresCAT-QM cable and a QM receiver are all that is required for complete signal routing and device control, eliminating all the bulky, expensive cabling that would otherwise be needed.

        Professional Audio Features
        Eight stereo audio inputs accept balanced or unbalanced line-level signals from computers and other program audio sources. To accommodate a wide range of signals, adjustable input compensation is employed to help maintain consistent volume levels when switching between sources. In addition to the 8 program inputs, two gated microphone/line inputs are included with software-switchable 48V phantom power and independent 4-band speech-optimized equalization. Versatile matrix mixing allows the selected program signal and the microphone signals to be separated or mixed in any combination to feed 3 local Program, Speech, and Record outputs, each with its own unique mix.

        Three “local” balanced line level outputs are provided on the MPS-200, each with independent adjustments for volume, bass, treble, and mute. The stereo PROGRAM and mono SPEECH outputs are normally intended for driving external amplification, with relay muting on each output to prevent "thumping" on power up. The RECORD output allows for a separate stereo mix to feed a recording device or assistive listening system. Ten-band graphic equalization plus 2-band parametric equalization on each output eliminates the need for expensive outboard audio processors, and up to 40mS delay adjustment is available on the SPEECH output for proper loudspeaker alignment.

        The QM Touchpanel output is controlled separately from the other audio outputs, allowing a different program source and microphone mix to be monitored on the touchpanel, or output to other audio equipment by way of an appropriate QM receiver or other QuickMedia device.

        Built-in Amplifier
        A 40-watt amplifier is built into the MPS-200, with three models available offering the choice of 8-ohm stereo, 70V mono, or 100V mono outputs. For large rooms requiring more power, the MPS-200 supports plug-and-play compatibility with Crestron QM-Series 3-channel amplifiers, providing a complete solution for driving a professional loudspeaker system with separate program and speech channels.

        Front Panel Control
        Out of the box, the MPS-200 front panel supports easy pushbutton routing of input sources to each of the outputs, and audio volume adjustment using the volume control knob. Dedicated buttons and indicators are also provided for separate control of system power and projector power. In addition, five preset buttons are included for custom functions such as lowering a projection screen, closing blinds, or selecting a lighting preset.

        The front panel label strips are easily customized using Crestron Engraver software or standard 3/8" tape labels, allowing for the clear designation of each input, output, and preset button. When selected, these functions will also appear on the LCD display as generic names (Input 1, 2...), or as custom names (DVD, Podium PC, Screen Up, etc.).

        Easy setup of the MPS-200 is facilitated through the LCD display without necessitating a computer. Together with 4 softkey buttons, 4 menu navigation buttons and the volume knob, the LCD enables configuration of IP network, audio, and other system settings. For security, the front panel controls can be password protected or locked out.

        2-Series Control System
        Integrated into the MPS-200 is a Crestron 2-Series Ethernet control system complete with e-Control®2 Web server and a host of RS-232, IR, digital input and relay control ports for integration with third-party equipment. A basic AV presentation room with projector, screen, keypad or small touchpanel, and wireless remote control can easily be set up in minutes using the MediaManager Wizard software. Or, a fully custom system can be programmed using SystemBuilder™ or SIMPL™Windows® software. Either way, the MPS-200 works with Crestron RoomView® Help Desk software, the industry's most comprehensive facility-wide asset management solution.

        Room Control Options
        Without requiring any programming, the MPS-200 can be controlled simply using a Crestron APAD LCD Controller or a selection of keypads. With custom programming, our complete line of Isys™ touchpanels and MediaManager FlipTops is supported. Equipped with an optional CNXRMIRD IR receiver, the MPS-200 allows any Crestron IR wireless touchpanel or handheld remote to be used for a low-cost wireless control solution. Or, adding an RF wireless gateway or Wi-Fi access point enables use of a wide range of 1-way and 2-way RF wireless handheld remotes and touchpanels.

        Internal Block Diagrams

        Audio
        Enlarge
        Download (PDF)

         

        Video
        Enlarge
        Download (PDF)

         
        Key Features
        • System switcher, audio processor, and control system
        • Out-of-the-box switching and audio control
        • 4 video/HDTV and 4 RGB/computer inputs
        • Built-in input signal sensing | auto-switching capable
        • Separate display and touchpanel preview outputs
        • NEW! RGB Pass-thru mode for easy integration with DigitalMedia
        • QuickMedia and Crestron Home CAT5 AV connectivity
        • 8 balanced stereo audio inputs | 2 gated mic inputs
        • Separate program, speech, and record outputs
        • Graphic and parametric equalization | 40mS audio delay
        • Built-in 40 watt amplifier - stereo, 70V, or 100V models
        • 2-Series control engine | e-Control 2 Web server
        • 10/100 Ethernet | RoomView and SNMP support
        • 2 RS-232, 4 IR, 4 digital in, & 4 relay control ports
        • Front panel setup and control | Backlit LCD display
        • Keypad, touchpanel, and wireless control options
        • Internal power supply | 2-space rack-mountable
        • For QuickMedia wiring use CRESCAT-QM, CRESCAT-IM, or quality CAT5e/CAT6 cable with a delay skew of ≤15nS per 100m; the maximum aggregate cable length and delay skew between any QM transmitter (origination point) and QM receiver (endpoint) is 450 ft (137 m) and 22 nS; a maximum of two QM midpoint devices may be inserted in a given QM signal path; exceptions apply, refer to each respective product manual for full detail.
         
        Processor
          CPU 32-bit Freescale ColdFire® Microprocessor
        Memory
          SDRAM 32 MB
          NVRAM 256 KB
          Flash 16 MB
        Operating System
          Real-time, preemptive, multitasking kernel, multi-threaded; FAT32 file system with long names; supports SIMPL™Windows® and SIMPL+®
        Ethernet
          10/100BaseT, static IP or DHCP/DNS, SSL, auto-negotiating, full duplex TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView® applications
        Video
          Switcher 8x2 crosspoint matrix, 1x4 output format selector, RGB pass-thru mode (multi-format via RGB output connection)
          Signal Types RGB and composite, S-Video, or component video (does not transcode)
          Video/HDTV Formats NTSC or PAL, HDTV up to 1080i/1080p
          RGB Formats RGBHV, RGBS
          Maximum Resolution QXGA 2048 X 1536 @ 60Hz (WUXGA 1920 X 1200 @ 60Hz via QM)
          Blanking Time < 0.1 second
          Sync Rise/Fall Time 3.5 ns maximum
          Sync Latency < 30 ns
          Gain 0dB (75 ohms terminated)
        Audio
          Switcher/Preamp 8x2 stereo crosspoint matrix, 2-channel gated mic preamp w/EQ, 4X5 mic/program matrix mixer, stereo volume/tone control and EQ per each of PROGRAM and RECORD outputs, mono volume/tone control and EQ/delay on SPEECH output, integrated power amplifier
          A-D/D-A Conversion 24-bit, 48 kHz
          Output Volume Range -80dB to +20dB, 0.1dB steps
          Mixer Volume Range -80dB to 0dB, 0.1dB steps
          Mute -100dB (electronic), -120dB (relay)
          Input Compensation ±10dB, 0.1dB steps
          Mic Input Gain 0 to 100 % (40dB range) plus mute
          Gate Level (Threshold) 0 to 100 %
          Attack 0 to 100 mS
          Decay (Release) 0 to 5000 mS
          Mic EQ Filter Gain ±12dB, 0.1 dB steps
          Mic EQ Filter Center Frequencies 160, 500, 1.2k, 3k Hz
          Bass Gain Range ±12dB @ 100Hz, 0.5 dB steps
          Treble Gain Range ±12dB @ 10kHz, 0.5 dB steps
          Output Equalization 10-band graphic + 2-band parametric
          PEQ Filter Gain ±12dB, 0.1 dB steps
          PEQ Filter Bandwidth 0.1 to 3.0 octaves, 0.1 octave steps
          PEQ Filter Center Frequency 25Hz to 20kHz, 0.5Hz steps
          PEQ Filter Types Low Pass, High Pass, Peaking Eq, Notch, Treble Shelf, Bass Shelf
          GEQ Filter Gain ±12dB, 0.1dB steps
          GEQ Filter Center Frequencies 31, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
          Speech Output Delay 0 to 40 mS, 1mS steps
          Frequency Response 20Hz to 20kHz ±0.5dB (PROG/REC OUT);
        50Hz to 20kHz ±0.5dB (SPEECH OUT);
        20Hz to 20kHz ±0.5dB (SPEAKER @ 8 ohms);
        100Hz to 20kHz ±1.5dB (SPEAKER @ 70V or 100V)
          S/N Ratio 90dB (PROG/REC OUT @ 10dBV, 20Hz to 20kHz A-weighted);
        90dB (SPEECH OUT @ 10dBV, 50Hz to 20kHz A-weighted);
        90dB (SPEAKER @ 8 ohms, full output, 20Hz to 20kHz A-weighted);
        90dB (SPEAKER @ 70V or 100V, full output, 20Hz to 20kHz A-weighted)
          THD+N 0.05% (PROG/REC OUT @ 10dBV, 20Hz to 20kHz);
        0.05% (SPEECH OUT @ 10dBV, 50Hz to 20kHz);
        0.7% (SPEAKER @ 8 ohms, full output, 20Hz to 20kHz);
        0.7% (SPEAKER @ 70V or 100V, full output, 100Hz to 20kHz A-weighted)
          Stereo Separation -75dB (PROG/REC OUT @ 10dBV, 20Hz to 20kHz);
        -60dB (SPEAKER @ 8 ohms, full output, 20Hz to 20kHz)
          Channel Crosstalk -70dB (AUD IN @ 10dBV, 20Hz to 20kHz)
        Connectors - Audio
          MC/LN 1 - 2 (2) 5-pin 3.5mm detachable terminal blocks;
        Comprises (2) balanced microphone/line inputs;
        Balanced Mic Input Level: -52 to -12 dBV, 240 mVrms maximum;
        Balanced Line Input Level: -28 to +11 dBV, 3.7 Vrms maximum;
        Unbalanced Line Input Level: -34 to +5 dBV, 1.85 Vrms maximum;
        Mic Input Impedance: 3.9k ohms, accepts 60 to 600 ohm source;
        Line Input Impedance: 19k ohms balanced, 9.5k ohms unbalanced;
        Phantom Power: 10 mA (total) @ 48 Volts DC, software enabled to both mic inputs
          PROG OUT (1) 5-pin 3.5mm detachable terminal block;
        Balanced/unbalanced stereo line-level output;
        Output Impedance: 200 ohms balanced, 100 ohms unbalanced;
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
          REC OUT (1) 5-pin 3.5mm detachable terminal block;
        Balanced/unbalanced stereo line-level output;
        Output Impedance: 200 ohms balanced, 100 ohms unbalanced;
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
        Note: Does not include relay mute
          SPEECH OUT (1) 3-pin 3.5mm detachable terminal block;
        Balanced/unbalanced mono line-level output;
        Output Impedance: 200 ohms balanced, 100 ohms unbalanced;
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
          AUD IN 1 - 8 (8) 5-pin 3.5mm detachable terminal blocks;
        Balanced/unbalanced stereo line-level inputs;
        Input Impedance: 24k ohms balanced/unbalanced;
        Balanced Input Level: -20 to +12 dBV; 4 Vrms maximum;
        Unbalanced Input Level: -20 to +6 dBV; 2 Vrms maximum
          SPEAKER (1 or 2) 2-pin 5mm detachable terminal blocks;
        Speaker-level audio outputs;
        Wire Size: Connector accepts 12 AWG maximum;
        Output Power (MPS-200): 20W RMS per channel stereo into 8 ohms, 4 ohms tolerant;
        Output Power (MPS-200-70V): 40W RMS mono at 70 Volts;
        Output Power (MPS-200-100V): 40W RMS mono at 100 Volts
        Connectors - Video
          COMP/Pb, Y/Y, C/Pr 1 - 4 (4) sets of (3) BNC female video inputs, each set configurable as:
      • (1) Component/HDTV (YPbPr) video input, or
      • (1) S-Video (Y/C) input, or
      • (1) Composite input
      • Input Level: 1 Vp-p nominal;
        Input Impedance: 75 ohms nominal;
        DC Offset: Insensitive to DC offset (AC coupled);
        Video signal sensing on COMP/Pb or Y/Y
          RGBHV 5 - 8 (4) DB15HD female, RGBHV (VGA) inputs;
        Format: RGBHV or RGBS;
        RGB Input Level: 1 Vp-p nominal;
        RGB Input Impedance: 75 ohms nominal;
        Sync Input Level: 2 to 5 Vp-p;
        Sync Input Impedance: 75, 500, or 1k ohms individually selectable for H and V via bottom panel DIP switch;
        Video signal sensing on “H-SYNC”;
        Defeatable DDC pull-up resistors
          COMP OUTPUT 1 (1) BNC female, composite video output;
        Output Level: 1.0 to 1.1 Vp-p (terminated, with 1 Vp-p input);
        Output Impedance: 75 ohms nominal
          Y, C OUTPUT 1 (2) BNC female, S-Video (Y/C) video output;
        Output Level: 1.0 to 1.1 Vp-p (terminated, with 1 Vp-p input);
        Output Impedance: 75 ohms nominal
          Pb, Y, Pr OUTPUT 1 (3) BNC female, component/HDTV (YPbPr) video output;
        Output Level: 1.0 to 1.1 Vp-p (terminated, with 1 Vp-p input);
        Output Impedance: 75 ohms nominal
          RGBHV OUTPUT 1 (1) DB15HD female;
        RGBHV, component, S-Video, and composite video output;
        Formats: RGBHV, RGBS, YPbPr, Y/C, composite;
        RGB/Video Output Level: 0.7 to 0.75 Vp-p (terminated, with 0.7 Vp-p input, unity gain);
        RGB/Video Output Impedance: 75 ohms nominal;
        H/V Sync Output Level: 4 to 5 Vp-p;
        H/V Sync Output Impedance: 55 ohms;
        H/V Sync Polarity: Follows input
          TOUCHPANEL CH 2 (1) 8-wire RJ45 female, CAT5 balanced video output port;
        Signal Types: Dynamically configurable for component (YPbPr), S-Video (Y/C), or composite video;
        Video/HDTV Formats: NTSC or PAL, HDTV up to 1080i;
        Output Impedance: 100 ohms balanced;
        Connects to CH CAT5 balanced video input port of a compatible touchpanel or other device via CRESCAT cable
          TOUCHPANEL QM 2 (1) 8-wire RJ45 female, QuickMedia output port;
        Signal Types: Dynamically configurable for RGBHV, component (YPbPr), S-Video (Y/C), or composite video with stereo program and 2-channels microphone audio;
        RGB Format: RGBHV, RGBS;
        RGB Output Resolution, Non-interlaced: 1920 x 1200 maximum (60 Hz limit at 1600 x 1200 or higher);
        Video/HDTV Formats: NTSC or PAL, HDTV up to 1080i/1080p;
        Connects to QM input port of a compatible touchpanel or other QuickMedia device via CRESCAT-QM or CRESCAT-IM cable[1]
        Connectors - Control & Power
          IR/SERIAL OUT A - D (4) 2-pin 3.5mm detachable terminal blocks;
        IR/Serial output ports;
        IR output up to 1.2 MHz;
        1-way serial TTL/RS-232 (0-5 Volts) up to 9600 baud
          IR IN (1) 3-pin 3.5mm detachable terminal block;
        For connection of the CNXRMIRD IR Receiver (sold separately);
        Allows control from IR wireless remotes using RC-5 command set
          INPUT 1 – 4 (1) 5-pin 3.5mm detachable terminal block;
        Comprises (4) digital/contact closure inputs;
        Rated for 0-24 Volts DC, referenced to GND;
        Input Impedance: 2.2k ohms pulled up to 5 Volts DC;
        Logic Threshold: 2.5 Volts DC nominal with 1 Volt hysteresis band
          RELAY 1 - 4 (1) 8-pin 3.5mm detachable terminal block;
        Comprises (4) normally open, isolated relays;
        Rated 1 Amp, 30 Volts AC/DC;
        MOV arc suppression across contacts
          COM A - B (2) DB9 male, bidirectional RS-232 ports;
        Up to 115.2k baud, hardware and software handshaking support
          LAN (1) 8-wire RJ45 with 2 LED indicators;
        10/100BaseT Ethernet port;
        Green LED indicates link status;
        Yellow LED indicates Ethernet activity
          NET (4) 4-pin 3.5mm detachable terminal blocks;
        Cresnet Master ports, paralleled;
        Available Cresnet Power: 30 Watts
          G (1) 6-32 screw, chassis ground lug
          100-240V~2.5A (1) IEC Socket, main power input;
        Mates with removable power cord, included
          COMPUTER (front) (1) USB Type B female;
        USB 1.1 computer console port (cable included)
        LCD Display
          Green LCD alphanumeric, adjustable backlight;
        2 lines x 20 characters per line;
        Displays input/outputs by name, volume level bargraph, setup menus, time/date, and other system information
        Controls and Indicators
          NET (1) yellow LED, indicates Cresnet bus activity
          MSG (1) yellow LED, indicates control system has generated an error message
          HW-R (1) recessed miniature pushbutton for hardware reset, reboots the control system
          SW-R (1) recessed miniature pushbutton for software reset, restarts the SIMPL program
          SYS PWR (1) pushbutton and green LED, controls system power
          PROJ PWR (1) pushbutton and green LED, controls display device power
          SOFTKEYS (4) pushbuttons for activation of LCD driven functions and passcode entry
          MENU (1) pushbutton, steps menu back one level
          Λ, V (2) pushbuttons, scroll up or down through menu and adjust menu parameters
          ENTER (1) pushbutton, executes highlighted menu or value
          VOLUME (1) continuous turn rotary encoder, adjusts menu parameters, defaults to program audio volume
          FUNCTION 1 – 5 (5) pushbuttons and red LEDs, programmable for any control system function
          IN 1 – 8 (8) pushbuttons and red LEDs, select input to be routed
          OUT 1 – 2 (2) pushbuttons and red LEDs, select output destination
        Power Requirements
          Main Power 2.5 Amps @ 100-240 Volts AC, 50/60 Hz
          Available Cresnet Power 30 Watts
        Environmental
          Temperature 41° to 104°F (5° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Chassis Steel, black matte powder coat finish, convection-cooled, vented top and sides
          Faceplate Extruded aluminum, black matte powder coat finish with polycarbonate label overlay
          Mounting Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included)
        Dimensions
          Height 3.56 in (90 mm);
        3.47 in (88 mm) without feet
          Width 17.03 in (433 mm);
        19.0 in (483 mm) with ears
          Depth 12.54 in (319 mm)
        Weight
          MPS-200 9.5 lb (4.3 kg)
          MPS-200-70V/100V 11.3 lb (5.1 kg)
        • For QuickMedia wiring use CRESCAT-QM, CRESCAT-IM, or quality CAT5e/CAT6 cable with a delay skew of ≤15nS per 100m; the maximum aggregate cable length and delay skew between any QM transmitter (origination point) and QM receiver (endpoint) is 450 ft (137 m) and 22 nS; a maximum of two QM midpoint devices may be inserted in a given QM signal path; exceptions apply, refer to each respective product manual for full detail.