Products

    Pages

        CSA-PWS40

        Power Pack for Crestron® Shade Interfaces & Shade or Drapery Motors

        The CSA-PWS40 is a wall-mounted power pack that provides power for a Crestron® shade interface. It can also provide local power for one Crestron roller shade or drapery system motor (certain models only). 

        The CSA-PWS40 is an outlet-mountable, 40 Watt, 24 Volt DC regulated power pack that provides power for a Crestron® shade interface, shade motor, or drapery motor. It is particularly useful to provide a local power source for infiNET EX® wireless motors.[1]

         
        1. The CSA-PWS40 only provides power to compatible Crestron roller shade motors. Cresnet® control wiring must come from a different source, if needed.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative in your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Cresnet, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc

         
        Output Rating
          24 Volts DC, 40 Watts (1.66 Amps), regulated
        Power Requirements
          1 Amp @ 100-240 Volts AC, 50/60 Hz
        Connections
          Line (1) NEMA 1-15P ungrounded AC power plug, line power input
          Load (1) 8 ft (2.43 m) attached cable with inline ferrite core and flying leads
        Construction
          94V-0 polycarbonate, white, outlet-mountable
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 15% to 95% RH (non-condensing)
          For indoor use only
        Dimensions
          Height 3.55 in (90 mm)
          Width 1.50 in (38 mm)
          Depth 3.12 in (80 mm)
          Projects 2.45 in (63 mm) from the AC outlet
        1. The CSA-PWS40 only provides power to compatible Crestron roller shade motors. Cresnet® control wiring must come from a different source, if needed.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative in your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Cresnet, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc