Products

    Pages

        DIN-8SW8-I

        DIN Rail High-Voltage Switch with Digital Inputs

        • 8 channels of power switching
        • Support for 120 to 240 Volt 50/60 Hz lighting and motor loads
        • 8 voltage-driven isolated digital inputs
        • Override input

        The DIN-8SW8-I is an 8-channel lighting control module designed to support non-dimmable lighting and fan switching. In addition, the DIN-8SW8-I features eight isolated digital inputs, allowing standard momentary switches to trigger events with or without a control system. A single model supports both 120 and 220-240 Volt applications. Each channel handles incandescent loads up to 10 Amps, fluorescent loads up to 5 Amps, and 1/2 HP motor loads.[1]

        Override Input
        An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset state. States can be set and saved locally from the front panel or remotely via software.

        Isolated Local Inputs
        The DIN-8SW8-I provides eight isolated local inputs, allowing momentary pushbutton keypads to be used. By default, a momentary voltage applied to each input will cause the associated relay to toggle on/off. In addition, the attached Crestron® control system can override this behavior and create eight general-purpose inputs. In this mode, pushbutton keypads can be programmed to provide customized functionality.

        DIN Rail Installation
        The DIN-8SW8-I is designed to snap onto a standard DIN rail for installation in a wall-mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom of the unit, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-8SW8-I's front panel stays accessible while the connections are concealed.

        Cresnet®
        The DIN-8SW8-I communicates with a Crestron control system via the Cresnet control network. A pair of Cresnet ports is provided on the DIN-8SW8-I for easy daisy-chaining of several DIN Rail Series automation control modules.

         
        Key Features
        • 8 channels of power switching
        • 8 voltage-driven isolated digital inputs
        • Support for 120 to 240 Volt 50/60 Hz lighting and motor loads
        • Override input
        • Cresnet® communications
        • Setup via front panel or software
        • Programmable functionality
        • 9M wide DIN rail mounting
        1. May not be compatible with some high inrush current loads.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.

         

         
        Pyng
        Load Ratings
          Switch Channels 8
          Maximum Per Channel 10 Amps incandescent, 5 Amps fluorescent, 0.5 HP at 120 to 240 Volts AC, 50/60 Hz;
        5 Amps at 30 Volts DC;
        16 Amps Resistive
          Module Total 80 Amps incandescent, 40 Amps fluorescent at 120 to 240 Volts AC, 50/60 Hz
          Load Types[1] Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motor
        Connections
          1 – 8 (8) Sets of (2) captive screw terminals;
        Isolated Class 1 SPST relay switch circuits 1 – 8;
        Relay Rating: 10 Amps incandescent, 5 Amps fluorescent, 16 Amps resistive, 0.5 HP at 240 Volts AC (per channel);
        Maximum Wire Size: 12 AWG (2.5 mm²)
          INPUTS 1-8 (9) 3.5 mm detachable terminal blocks (inputs 1-8, common);
        Rated for 12-24 Volts DC; Input Impedance: 6.8k Ohms
          NET (2) 4-pin 3.5 mm detachable terminal blocks, paralleled;
        Cresnet® slave port
          OVERRIDE (2) 2-pin 3.5 mm detachable terminal blocks, paralleled;
        Sensing input for external low-voltage contact closure;
        Activates override mode when a closure is present;
        Minimum Closure Rating: 10 mA (per module) at 24 Volts
        Controls & Indicators
          1 – 8 (8) Red LEDs and (8) miniature pushbuttons for status indication and local control of each channel
          NET ID (2) 7-segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID
          SETUP (1) Red LED and (1) recessed miniature pushbutton for enabling Setup mode and entering touch-settable ID
          OVR (1) Red LED and (1) miniature pushbutton for enabling Override mode and saving override presets
          PWR (1) Green LED, illuminates when DC power is applied to the NET port
          NET (1) Yellow LED, indicates communication with the control processor
          RESET (1) Recessed miniature pushbutton, resets internal processor
        Enclosure
          Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm)
        Power Requirements
          Cresnet Power Usage 5.4 Watts (0.23 Amps at 24 Volts DC)
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 18 BTU/hr
        Dimensions
          Height 3.71 in (94 mm)
          Width 6.26 in (159 mm)
          Depth 2.35 in (60 mm)
        Weight
          13.1 oz (369 g)
        1. May not be compatible with some high inrush current loads.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.