Products

    Pages

        CRESFIBER-NP-SP1000

        CresFiber® Fiber Optic Cable, 50/125 x4 breakout, non-plenum, 1000 ft spool

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Crestron CresFiber is multimode fiber optic cable designed to ensure the simple and reliable installation of a fiber-based DigitalMedia™ system.

        For a substitute, please see CRESFIBER8G-NP.

        Crestron CresFiber is multimode fiber optic cable designed to ensure the simple and reliable installation of a fiber-based DigitalMedia™ system. High-bandwidth laser-optimized cores enable wire runs up to a maximum of 1000 ft (300 m) between DM devices. Breakout cable construction helps simplify termination, providing four individually jacketed fiber strands within a single reinforced outer jacket, eliminating any need for a separate breakout assembly or intermediary splice. Only two fiber strands are required for connecting DigitalMedia equipment, leaving two spare strands for backup or expansion.

        Available in 500 and 1000 ft spools, model CRESFIBER-NP is intended for non-plenum indoor riser applications. (For plenum applications, use CRESFIBER-P.) Foot markers are printed on the outer jacket making it easy to determine the exact length of each cable run when commissioning the installed system. Termination of CresFiber cable can be accomplished in under 10 minutes per connector using Crestron CRESFIBER-CONN-SC50UM connectors and the CRESFIBER-TK termination kit.

         
         
        Multimode Fiber Strands (x4)
          Fiber Core Core/Cladding Diameter: 50/125 µm nominal;
        Minimum Laser Bandwidth/EMB: 750 MHz/km at 850 nm, 500 MHz/km at 1300 nm;
        Maximum Attenuation: 3 dB/km at 850 nm, 1 dB/km at 1300 nm;
        Dispersion: Less than 6 ns/km between 800-850 nm wavelengths
          Buffer Type: Tight, 900 µm diameter nominal;
        Colors (1-4): Blue, Orange, Green, Brown
          Strength Member Material: Aramid fiber
          Jacket Colors (1-4): Blue, Orange, Green, Brown;
        Material: PVC;
        Outer Diameter: 0.094 in (2.4 mm) nominal
        Outer Jacket
          Jacket Material: Riser-rated PVC;
        Ripcord: Yes;
        Tape Wrap: Polypropylene;
        Outer Diameter: 0.313 inch (8.0 mm) nominal or less;
        Color: Aqua w/white text
          Central Strength Member Material: Fiberglass epoxy rod (dielectric)
        Mechanical
          Maximum Tensile Load 270 lbf (1200 N) for installation, 110 lbf (500 N) for operation
          Minimum Bend Radius 6.3 in (160 mm) for installation, 3.15 in (80 mm) for operation
          Crush Resistance (EIA 455-41) 100 N/cm
          Impact Resistance (EIA 455-25) 25 impacts minimum
          Flexing, ±90° 25 cycles minimum
        Environmental
          Operating Temperature -40° to +185°F (-40° to +85°C)
          Installation Temperature +32° to +167°F (0° to +75°C)
          Storage Temperature -67° to +185°F (-55° to +85°C)
        Weight
          35 lb/1000 ft (53 kg/km) nominal
        Rating
          OFNR (UL 1666), CSA FT4