Products

    Pages

        TSW-760/1060-MSMK-B-S

        Multi-Surface Mount Kit for TSW-760 & TSW-1060, Black Smooth

        Allows a TSW-760 or TSW-1060 touch screen to be mounted to a glass wall or other smooth, flat surface. Can also be mounted over an electrical box. Ideal for mounting at the entrance to a meeting space for room scheduling applications. Provides a 20° upward tilt angle for ADA compliance.

        The TSW-760/1060-MSMK Multi-Surface Mount Kit provides a versatile surface mounting solution for a TSW-760 or TSW-1060 Touch Screen. Using the Multi-Surface Mount Kit, the touch screen device can be mounted directly to glass, granite, marble, wood paneling, plaster, smooth masonry, or virtually any other flat surface. When installed, the touch screen is angled upwards at a 20° tilt to allow for mounting at an ADA approved height.

        Provisions are included for attaching securely to a flat, smooth surface without screws using the included peel-and-stick adhesive pad. To ensure a finished appearance when mounted to a transparent glass wall, a cosmetic label is provided, which simply affixes to the opposing side of the glass behind the unit. Alternately, the unit can be mounted over an electrical box using the screws provided. Wiring may be run through the back of the unit, or through one of the raceway knockouts located on the bottom or either side of the unit.

        The kit comes complete with self-adhering plastic raceway for use on smooth surfaces to conceal wires running to the touch screen from the floor, ceiling, or an adjacent wall, pillar, or mullion. The raceway is paintable and is composed of three 3 foot (0.91 m) sections plus an assortment of elbows and couplings.

         
        Key Features
        • Enables mounting a TSW-760 or TSW-1060 touch screen to virtually any flat, smooth surface
        • Ideal for mounting at the entrance to a meeting space for room scheduling applications
        • Provides a 20° upward tilt angle for ADA compliance
        • Secure, screwless installation using peel-and-stick adhesive pad
        • Perfect for mounting to a glass wall or partition
        • Includes an assortment of raceway to conceal wiring
        • Also allows attachment to a variety of electrical boxes
        • Available in smooth white or black finish

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at http://www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: http://patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit http://www.crestron.com/opensource.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        Construction
          Housing Plastic, smooth black or white finish
          Surface Mounting Peel-and-stick adhesive mount to glass or other flat, smooth surface
          Back Box Mounting Attaches to a 2-gang or 3-gang US electrical box, horizontally-oriented 1-gang US electrical box, 2-gang European electrical box, or 2-gang UK electrical box
          Raceway Peel-and-stick adhesive mount plastic raceway, white (paintable), 0.77 inch W x 0.46 inch D (19.6 mm W x 11.7 mm D) profile; includes (3) 3 ft (0.91 m) straight sections, (2) straight couplers, (2) 90° flat elbows, (1) inside elbow, and (1) outside elbow
        Dimensions
          Without touch screen device Height: 4.62 in (118 mm)
        Width: 6.08 in (155 mm)
        Depth: 2.20 in (56 mm), 2.26 in (58 mm) with adhesive pad
          With TSW-760 device installed Height: 4.70 in (120 mm)
        Width: 7.61 in (194 mm)
        Depth: 2.74 in (70 mm), 2.80 in (72 mm) with adhesive pad
          With TSW-1060 device installed Height: 6.29 in (160 mm)
        Width: 10.23 in (260 mm)
        Depth: 3.05 in (78 mm), 3.11 in (79 mm) with adhesive pad
        Weight
          4.2 oz (119 g) without touch screen device or raceway

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at http://www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: http://patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit http://www.crestron.com/opensource.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.