DM Lite® Receiver for HDMI® Signal Extension over CATx Cable, Wall Plate, Black Textured
Pairs with a DM Lite® transmitter to provide a simple point-to-point signal extender for HDMI® signals up to UHD and 4K.
The HD-RX-101-C-1G-E-B-T is a wall plate DM Lite® wall plate receiver designed to pair with a DM Lite transmitter to form a signal extender for HDMI® signals. The DM Lite family of products offers a versatile solution for extending HD, UHD, 2K, and 4K video signals with stereo or surround sound audio over a single CAT5e (or higher) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.1
For applications requiring a surface-mountable version, refer to the HD-RX-101-C-E product page. For applications requiring IR or RS-232 signal extension, refer to the HD-RXC-101-C-1G-E-B-T product page.
The HD-RX-101-C-1G-E-B-T is designed to mount into a single-gang electrical box or plaster ring (not included). When paired with a surface-mountable transmitter, the HD-RX-101-C-1G-E-B-T is powered by the transmitter over the DM Lite link cable.2
NOTE: This product is not addressable from a control system and offers no programmable functionality. AV and CEC signals are simply passed through between a single transmitter and receiver pair. The RJ-45 link port on this product is exclusively intended for linking with a single DM Lite transmitter. It should not be used to connect to any other equipment or network. DM Lite technology is not compatible with PoE, PoDM, DigitalMedia 8G+®, or HDBaseT® technology.
Key Features
- Pairs with a DM Lite® transmitter
- Enables extension of HDMI® video and audio signals
- Links to the transmitter via a single CAT5e (or higher) twisted pair cable
- Supports 4K and UHD at up to 130 ft (40 m)
- Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
- Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
- Handles 3D video and Deep Color
- Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
- Compatible with HDMI and DVI display devices
- HDCP 2.2 compliant
- Passes CEC and EDID signals
- Installs in a single-gang U.S. electrical box (2-1/4” deep) or plaster ring
- Decorator-style faceplate sold separately
- Normally powered by the transmitter (surface-mountable) over the link cable
| Video |
| Output Signal Type |
HDMI with Deep Color, 3D, and 4K (DVI compatible3) |
| Copy Protection |
HDCP 2.2 |
| Maximum Resolutions |
Common resolutions are listed in the following table. |
Scan
Type |
Resolution |
Frame
Rate |
Color
Sampling |
Color
Depth |
| Progressive |
4096x2160 DCI 4K
and
3840x2160 4K UHD |
24 Hz |
4:4:4 |
30 bit |
| 30 Hz |
4:4:4 |
24 bit |
| 30 Hz |
4:2:2 |
36 bit |
| 60 Hz |
4:2:0 |
24 bit |
| 2560x1600 WQXGA |
60 Hz |
4:4:4 |
36 bit |
| 1920x1080 HD 1080p |
60 Hz |
4:4:4 |
36 bit |
| Interlaced |
1920x1080 HD 1080i |
30 Hz |
4:4:4 |
36 bit |
NOTE: Custom resolutions are supported at pixel clock rates up to 300 MHz. |
| Audio |
| Output Signal Type |
HDMI |
| Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels |
| Communications |
| HDMI |
HDCP 2.2, EDID, CEC pass-through |
| DM Lite Link |
Proprietary link for connection between one DM Lite transmitter and receiver only |
| Connectors |
| HDMI OUT |
(1) HDMI Type A connector, female;
HDMI digital video/audio output (DVI compatible3) |
|
FROM TX (DM Lite, Rear)
|
(1) 8-pin RJ-45 connector, female, shielded;
DM Lite link port for connection to a DM Lite transmitter1 |
| 24VDC 1.25A (Rear) |
(1) 2-pin 3.5 mm detachable terminal block;
24 VDC power input
NOTE: A power pack is not included with the HD-RX-101-C-1G-E-B-T. When the
HD-RX-101-C-1G-E-B-T is paired with a surface-mountable transmitter, the 24 VDC power input of the HD-RX-101-C-1G-E-B-T is not used. The power pack included with and connected to the surface-mountable transmitter is used to power both the transmitter and the HD-RX-101-C-1G-E-B-T.2
|
| Indicators |
| PWR |
(1) Green LED, indicates operating power is supplied from the transmitter via the DM Lite link or from a power pack via the 24 VDC input |
| HDMI OUT |
(1) Green LED, indicates HDMI output signal presence |
| FROM TX (DM Lite) |
(2) LEDs on RJ-45 connector, green LED indicates DM Lite link status, amber LED indicates a valid video signal |
| Power |
| Power Pack (sold separately) |
Input: 100-240 VAC, 50/60 Hz;
Output: 1.25 Amps @ 24 VDC
NOTE: The power pack is required only when the HD-RX-101-C-1G-E-B-T is paired with a wall plate transmitter. When the HD-RX-101-C-1G-E-B-T is paired with a surface-mountable transmitter, the power pack included with and connected to the transmitter is used to power both the transmitter and the HD-RX-101-C-1G-E-B-T.2
|
| Environmental |
| Temperature |
32° to 104° F (0° to 40° C) |
| Humidity |
20% to 90% RH (non-condensing) |
| Construction |
| Composition |
Metal housing and bracket with black polycarbonate front label overlay |
| Mounting |
Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included) |
| Faceplate |
Requires a decorator-style faceplate (FP-G series, sold separately) |
| Dimensions |
| Height |
4.08 in. (104 mm) |
| Width |
1.81 in. (46 mm) |
| Depth |
1.97 in. (50 mm) |
| Weight |
| 5.22 oz (148 g) |
| Compliance |
| Regulatory Model |
HD-RX-101-C-1G-E-B-T |
| UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device |
| Maximum DM Lite Link Cable Lengths |
|
|
| 1920x1080 FHD 1080p |
230 ft (70 m) |
| 1920x1200 WUXGA |
| 1600x1200 UXGA |
| 2048x1080 DCI 2K |
| 2048x1152 QWXGA |
| 2560x1080 UWFHD |
130 ft (40 m) |
| 2560x1440 WQHD |
| 2560x1600 WQXGA |
| 3840x2160 4K UHD |
| 4096x2160 DCI 4K |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.