Master Photo: HD-DA4-4KZ-E: Front angle
Add to Favorites

HD-DA4-4KZ-E

1:4 HDMI® Distribution Amplifier w/4K60 4:4:4 & HDR Support

Splits one HDMI® source to four separate outputs. Supports 4K60 4:4:4 and HDR video signals with high-bitrate 7.1 audio. 
Have a question?
Add to a Project
Find a Dealer

The Crestron® HD- DA4-4KZ-E is a simple to use, high-performance 4K AV distribution amplifier designed to split a single HDMI® signal to feed up to four separate displays, switchers, and/or other devices. It provides full support for UHD and DCI 4K60 4:4:4 and HDR video, HDCP 1.4 or 2.2 copy protection, and high-bitrate 7.1 audio, to ensure optimal performance and compatibility for any HD or 4K video application. No programming or control system is required for operation.[1]

For smaller or larger applications, refer to models HD-DA2-4KZ-E and HD-DA8-4KZ-E.

 
Key Features
  • Splits one HDMI® source to four outputs
  • Handles 4K60 4:4:4 and HDR video signals [1]
  • Fully compatible with HD 1080p, UHD 4K, and DCI 4K sources and displays
  • Handles 3D video and Deep Color
  • Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
  • Selectable handling of HDCP 2.2 or HDCP 1.4
  • EDID management options
  • Input and output video presence indication
  • No programming or control system required
  • Thin profile – less than one inch deep
  • Surface, shelf, or single rack rail mountable
  • External 100-240V universal power pack included
  1. 4K60 4:4:4 and HDR support requires the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Please be aware that bandwidth loss is cumulative, so performance may be reduced when inserting multiple cables and couplers inline.
  2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

The specific patents that cover this and other Crestron products are listed online at https://www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2018 Crestron Electronics, Inc.

 
CrestronHome 4K HDCP 2.2
Video
Input Signal Type HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support[1] (DVI & Dual-Mode DisplayPort compatible[2])
Output Signal Type HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support[1] (DVI compatible[2])
Copy Protection Selectable for HDCP 2.2, HDCP 1.4, or HDCP disabled
Maximum Resolutions
Scan Type Resolution Frame
Rate		 Color
Sampling		 Color
Depth
Progressive 4096x2160 DCI 4K
or
3840x2160 4K UHD		 24 Hz 4:4:4 36 bit
30 Hz 4:4:4 36 bit
60 Hz 4:2:2 36 bit
60 Hz 4:4:4 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
NOTE: Common resolutions are shown; other resolutions are supported at pixel clock rates up to 600 MHz
Audio
Input Signal Type HDMI (Dual-Mode DisplayPort compatible[2])
Output Signal Type HDMI
Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels
Communications
USB USB 2.0 host; supports firmware update and custom EDID upload via a USB flash drive
HDMI HDCP & EDID (does not pass CEC)
HDCP Version Selectable for HDCP 2.2, 1.4, or OFF;
HDCP encrypted content is blanked in OFF mode
EDID Mode Selectable for DEFAULT or COPY 1ST;
• The factory default EDID is 4K60 4:4:4 non-HDR video with 2-channel LPCM audio;
• The factory default EDID can be replaced with a custom EDID via USB;
• Sliding the switch from DEFAULT to COPY 1ST copies and stores the EDID from the device at OUTPUT 1 and passes it to the INPUT source device;
• Sliding the switch from COPY 1ST to DEFAULT erases the stored EDID and uses the factory default or custom EDID;
Note: Changing the device at OUTPUT 1 will not update the stored EDID until the switch is moved to DEFAULT and back to COPY 1ST
Connectors
INPUT (1) HDMI Type A connector, female;
HDMI digital video/audio input[1];
(DVI & Dual-Mode DisplayPort compatible[2])
OUTPUT 1 – 4 (4) HDMI Type A connectors, female;
HDMI digital video/audio outputs[1];
(DVI compatible[2])
SERVICE (1) USB Type A connector, female;
USB 2.0 host port;
For firmware update and custom EDID upload via a USB flash drive
24VDC 0.75A (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2407WU power pack included
Controls & Indicators
PWR (1) Bi-color LED, indicates operating power is supplied via the power pack; illuminates amber while booting, green when operating
SETUP (1) Pushbutton and (1) red LED, restores factory settings
RESET (1) Recessed pushbutton for hardware reset
INPUT (1) Green LED, indicates video signal presence at the HDMI input
OUTPUT 1 – 4 (4) Green LEDs, each indicates video signal transmission at the corresponding HDMI output
HDCP (1) 3-position slide switch, selects the HDCP version (OFF, 1.4, or 2.2)
EDID (1) 2-position slide switch, selects the EDID mode (DEFAUT or COPY 1ST)
Power
Power Pack (included) Input: 100-240 Volts AC, 50/60 Hz;
Output: 0.75 Amps @ 24 Volts DC;
Model: PW-2407WU
Power Consumption 5.5 W (typical)
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Enclosure
Chassis Metal, black finish, with (2) integral mounting flanges
Mounting Freestanding, surface mount, or attach to a single rack rail
Dimensions
Height 0.87 in (22 mm)
Width 8.09 in (206 mm)
Depth 4.67 in (119 mm)
Compliance
CE, IC, FCC part 15 Class B digital device
Click here to search product certificates.
  1. 4K60 4:4:4 and HDR support requires the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Please be aware that bandwidth loss is cumulative, so performance may be reduced when inserting multiple cables and couplers inline.
  2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

The specific patents that cover this and other Crestron products are listed online at https://www.crestron.com/legal/patents.

Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.

Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2018 Crestron Electronics, Inc.

Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.