DigitalMedia™ Ultra Midspan PoDM++ Injector
Enables powering of one or two PoDM-powered DM 8G+ devices. Supports PoDM+ and PoDM++ powered devices. Installs in line or connects via a DM switcher I/O card.
The Crestron® DM-PSU-ULTRA-MIDSPAN provides a single-point, midspan power injector for one or two PoDM-powered DM 8G+® devices. Its ability to deliver power in two directions without impacting the video or data signals passing through is unique in the industry. Its high-output power capacity of 45 Watts per port enables support for PoDM+ and PoDM++ powered devices including the Crestron TS-1542-C touch screen.[1]
Bidirectional Power
The DM-PSU-ULTRA-MIDSPAN installs in line between two DM 8G+ devices and provides power to either or both of those devices. This allows a DM 8G+ transmitter and receiver, such as the DM-TX-4K-302-C and DM-RMC-4K-SCALER-C-DSP, to be paired together to form a custom point-to-point 4K signal extender, all powered from a single midspan power source. The use of a midspan power source with bidirectional powering capability eliminates the need for separate power supplies or electrical outlets at either endpoint.[2]
2-Port PoDM++ Power Supply
For larger systems utilizing a DM-MD8X8, DM-MD16X16, or DM-MD32X32 switcher, the DM-PSU-ULTRA-MIDSPAN can be used to supply PoDM++ power to two DM 8G+ devices via their connections to the switcher. Instead of installing in line, each port on the DM-PSU-ULTRA-MIDSPAN can be connected to the POE IN port of a DMC-4K-C input card, DMC-4K-C-DSP input card, or DMC-4K-CO-HD output card. Doing so enables the powering of two separate devices, whether transmitters, receivers, or touch screens, through the DM port on each card. A maximum of 45 Watts is available at each port.[1,2]
HDBaseT® Compatible
The DM-PSU-ULTRA-MIDSPAN is compatible with HDBaseT® Alliance specifications and may be used to supply power to IEEE 802.3at compliant HDBaseT PoE+ powered devices.
Mounting Options
The DM-PSU-ULTRA-MIDSPAN features integral mounting flanges to allow for surface mounting under a table, or attachment to a single rack rail. One or two units may also be installed in a single rack space using the optional rack mount kit (model ST-RMK, sold separately).
Key Features
- Powers one or two PoDM-powered DM 8G+® devices [2]
- Supports PoDM+ and PoDM++ powered devices
- Simultaneously supplies up to 45 Watts from each port [1]
- Inserts midspan and supplies power to both endpoints
- Preserves the integrity of 4K video and 10 GB data signals
- Maintains full 300 ft (100 m) cable length end-to-end
- Also functions as a 2-port PoDM++ power supply for DMC I/O cards
- Compatible with HDBaseT® PoE+ powered devices
- Includes status indicators for basic troubleshooting
- No configuration or programming required
- Surface or under-table mountable
- Attachable to a single rack rail
- 1 RU rack mount kit option sold separately
| Connectors |
| |
G |
(1) 6-32 screw;
Chassis ground lug |
| |
100-240V~ 50/60Hz 1.2-0.6A |
(1) IEC 60320 C14 main power inlet;
Mates with removable power cord, included |
| |
PoDM++ 1 – 2 |
(2) 8-pin RJ45 female, shielded;
DM 8G+ pass-through ports (HDBaseT compatible);
PoDM++ PSE ports (HDBaseT PoE+ compatible) [2] |
| Indicators |
| |
PWR |
(1 bottom/front, 1 top/rear) Green LEDs, each indicates main AC line power is connected and the unit is operating |
| |
PoDM++ 1 – 2 (bottom/front) |
(2) Green LEDs, each indicates the corresponding port is delivering power to the connected device |
| |
PORT PWR 1 – 2 (top/rear) |
(2) Green LEDs, each indicates the corresponding port is delivering power to the connected device |
| Power |
| |
Main Power |
1.2 Amp @ 100-125 Volts AC or 0.6 Amp @ 220-240 Volts AC, 50/60 Hz |
| |
Power Consumption |
0.7 Watts at idle |
| |
Power over DM (PoDM) |
IEEE 802.3at compliant PoDM++ PSE (Power Sourcing Equipment); each port supplies up to 45 Watts to power one PoDM (Class 0-3), PoDM+ (Class 4), or PoDM++ PD (Powered Device) [1] |
| |
Power over HDBaseT |
IEEE 802.3at PoE+ compliant PSE (Power Sourcing Equipment); each port supplies up to 30 Watts to power one HDBaseT PoE or PoE+ PD (Powered Device) [3] |
| Environmental |
| |
Temperature |
32° to 104° F (0° to 40° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
41 BTU/hr maximum;
8.2 BTU/hr typical;
2.4 BTU/hr idle |
| Enclosure |
| |
Chassis |
Metal, black finish, (2) integral mounting flanges, vented sides |
| |
Mounting |
Freestanding, surface mount, attach to a single rack rail, or 1 RU rack mount (ST-RMK rack mount kit sold separately) |
| Dimensions |
| |
Height |
6.06 in (154 mm) |
| |
Width |
6.95 in (177 mm) |
| |
Depth |
1.64 in (42 mm) |
| Weight |
| |
2.6 lb (1.2 kg) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.