Zum™ J-Box Accessory Power Supply
A Zūm™ junction box-mounted power supply for the Zūm Network Bridge or Zūm Contact Closure Output.
The ZUMMESH-JBOX-PSU is an accessory power supply that mounts to a four inch square junction box and provides a host for a Zūm™ Network Bridge (ZUMMESH-NETBRIDGE [1]) or Zūm Contact Closure Output (ZUMMESH-CCO [1]). It communicates wirelessly with other Zūm Mesh devices in a Zūm commercial room lighting system to enable centralized monitoring and management using the network bridge, or to enable integration with an HVAC system using the contact closure output.
The ZUMMESH-JBOX-PSU is similar to a ZUMMESH-JBOX load controller, but without any dimming or switch circuitry onboard.
Please refer to the Zūm Lighting Control System Setup Guide (Doc # 7957) for additional information.
Key Features
- Provides a means for adding a Zūm™ Network Bridge or Contract Closure Output to a Zūm lighting system [1]
- Zūm Mesh peer-to-peer RF communications [2]
- Pair and play wireless integration with Zūm dimmers, switches, occupancy sensors, vacancy sensors, and daylight sensors [1]
- 100-277 Volts AC line powered
- Flying lead wiring connections
- Knockout mount to a standard 4-inch square junction box
- UL® 2043 listed for installation in an environmental air handling space
- Meets UL 916 standard for energy management equipment
- Meets CEC Title 24 energy efficiency standards [3]
- Meets ASHRAE® 90.1 energy efficiency standards [4]
- ICC® International Energy Conservation Code® compliant [5]
| Wireless Communications |
| |
RF Transceiver |
Zūm Mesh & Zūm Net 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant |
| |
Zūm Mesh Range |
50 ft (15 m) to nearest Zūm Mesh peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities [2] |
| |
Zūm Net Range |
50 ft (15 m) to a Zūm Net wireless gateway or nearest Zūm Net mesh network device(s), requires the Zūm Network Bridge (model ZUMMESH-NETBRIDGE [1]), range between floors or ceilings is limited to one level, subject to site-specific conditions and individual device capabilities [2] |
| |
Note: A maximum of 32 Zūm Mesh wireless devices is permitted per room. Only one Network Bridge is permitted per room. |
| Controls & Indicators |
| |
SETUP |
(1) Pushbutton and (1) red LED, used for room setup and factory reset |
| |
TEST |
(1) Pushbutton and (1) green LED, used for room setup and factory reset |
| Connections |
| |
Hot |
(1) 14 AWG Class 1 flying lead, black, line power input |
| |
Neutral |
(1) 14 AWG Class 1 flying lead, white, neutral |
| |
Expansion Port |
Accessory port for optional Zūm Network Bridge or Zūm Contact Closure Output (model ZUMMESH-NETBRIDGE or ZUMMESH-CCO [1]) |
| Power |
| |
Line Power |
100-277 Volts AC, 50/60 Hz |
| |
Idle Power Consumption |
1 Watt |
| Environmental |
| |
Temperature |
32° to 104° F (0° to 40° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| Construction |
| |
Housing |
Plastic, white, UL 94 5VA flame rated |
| |
Mounting |
Mounts to the side of a 4-inch square junction box via a 1/2 inch conduit knockout, meets the requirements of UL 2043 for installation in an environmental air-handling (plenum) space |
| Dimensions |
| |
Height |
3.25 in (83 mm) |
| |
Width |
4.17 in (106 mm) |
| |
Depth |
1.32 in (34 mm) |
| |
Note: Projects 3.66 inches (93 mm) from the junction box when installed. |
| Weight |
| |
7 oz (199 g) |
| Compliance |
| |
UL Listed for US & Canada, IC, FCC Part 15 Class A digital device, UL 916, UL 2043, UL 94 5VA, CEC Title 24 [3], ASHRAE 90.1 [4], IECC [5] |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.