Zūm® Wired Keypad with Link Communication, Rocker Button, White, White
A white rocker keypad designed for a selection of Zum® Link devices junction box-mounted load controllers to provide intelligent lighting control as part of a complete Zūm wired commercial room lighting system.
The Crestron® ZUMLINK‑KP is a Zūm® Wired Keypad that provides control of one or more Zūm Link J-Box Load Controllers such as the ZUMLINK‑JBOX‑16A‑LV, ZUMLINK‑JBOX‑20A‑SW, and ZUMLINK‑JBOX‑20A‑PLUG. Bluetooth® functionality allows for configuration of the room via the Zūm app.
Zūm Link Wired Technology
Zūm Link technology allows for in‑room lighting control through ZUMLINK‑KP keypads and sensors wired to J‑box load controllers. The ZUMLINK‑KP connects via CAT5e cable (CBL‑CAT5E‑ZUMLINK‑P) to a J‑box load controller to provide within room lighting control of compatible loads.
Button Configurations
The ZUMLINK‑KP is equipped with a single, white rocker button for switching or dimming control and is configurable with four, six, or eight pad printed or engravable button trees (sold separately). Replacement configurations are available in an almond, black, gray, red or white finish.
Easy Installation
Designed with flexibility and ease-of-use in mind, Zūm wired keypads are preprogrammed so the keypad can be installed in a room along with Zūm load controllers, occupancy or vacancy sensors, and a daylight sensor, and then used to control the lights in the room without programming. Room setup can be accomplished quickly through the Zūm app. A finished installation requires a decorator-style faceplate (FP‑G Series, sold separately).
Key Features
- Provides control of one or more Zūm® wired J-Box Load Controllers
- RS485 communications for increased reliability
- Preprogrammed rocker button
- Configurable with four, six, or eight engraved or pad printed button trees (ZUMLINK‑BTN4, ZUMLINK‑BTN6, ZUMLINK‑BTN8, not included)
- Powered by 24V Zūm Link bus
- Two RJ‑45 connections for device daisy‑chaining
- Standard 3.5 in. (89 mm) deep electrical box installation
- Button tree and bezel available in almond, black, gray, red, and white finish
- Matching decorator-style faceplate required (FP‑G Series, not included)
| Power Requirements |
| Powered by 24V ZUMLINK Bus |
| Communications |
| Zūm Link |
(2) RJ‑45 ports;
Connects to Zūm Link device for load control;
Provides in‑room device daisy‑chaining;
Maximum 750mA pass-through current including any internal power supply |
| Bluetooth |
Bluetooth low energy, Version 4.0;
Pairs with a mobile device running the Zūm app |
| Controls and Indicators |
| Push button |
(1) rocker button preprogrammed;
Configurable with combinations of ZUMLINK‑BTN4, ZUMLINK‑BTN6, ZUMLINK‑BTN8 in pad printed or engraved models, sold separately |
| LED |
(1) Green LED;
Indicates On/Off status of connected load
Lights briefly to indicate a button press |
| Environmental |
| Temperature |
32° to 104°F (0° to 40°C) |
| Humidity |
10% to 90% RH (noncondensing) |
| Construction |
| Composition |
Plastic housing and front face |
| Mounting |
Mounts in a 1‑gang, 3.5 in. (89 mm) deep electrical box (not supplied) |
| Faceplate |
Requires a decorator style faceplate (FP‑G Series, not supplied) |
| Dimensions |
| Height |
4.13 in. (105 mm) |
| Width |
1.50 in. (38 mm) |
| Depth |
1.28 in. (33 mm) |
| Weight |
| 5 oz (142 g) |
| Compliance |
Regulatory Model: M201937001
UL® Listed for US & Canada, IC, FCC Part 15 Class B digital device, UL 916, CSA C22.2 No. 205, CEC Title 24, ASHRAE 90.1, IECC |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.