Dual-Tech Presence Detector with Daylight Sensing, HVAC Control, and Link Communication for Zūm® Wired Lighting Control
STEINEL™ dual technology presence detector with Zūm® Link communication. Uses presence detection and daylight sensing to maximize energy savings.
As part of providing professional lighting and control solutions for the entire enterprise, we are pleased to offer STEINEL™ products, which are available for sale through authorized Crestron® Commercial Lighting system integrators.
Based in Germany, STEINEL has been manufacturing lighting controls for over 25 years. Their product offering includes a wide variety of controls and sensors for indoor and outdoor applications.
STEINEL™ presence detectors with Zūm® Link wired communication are part of a system designed to provide sophisticated lighting control with simple installation. A wired solution for Zūm commercial lighting systems, the Zūm Link Presence Detectors communicate via CBL‑CAT5E‑ZUMLINK‑P cable (sold separately) which allow for in‑room device daisy‑chaining to other Zūm Link devices (such as the ZUMLINK‑KP keypad or Zūm Link load controllers). The presence detectors are equipped with daylighting capabilities to adjust the lighting based on natural light. The RLY presence detectors also have a three-wire output relay to connect to a relay-input capable device, such as an HVAC call system. The presence detectors mount directly to the ceiling or via a junction box (not included).
Twelve Zūm Link Presence Detectors are offered:
Zūm Link Presence Detectors with Daylight Sensing
Zūm Link Presence Detectors with Daylight Sensing and Output Relay
Zūm Link Wired Technology
Zūm Link technology enables in‑room lighting control through keypads and sensors wired to controllers. Zūm Wired devices connect via CBL‑CAT5E‑ZUMLINK‑P CAT5e cable (sold separately) to provide daisy-chaining and lighting control of compatible loads.
Easy Installation
For flexibility and ease‑of‑use, install Zūm devices (load controllers, keypads, and presence detectors) and connect them with Zūm Link (CBL‑CAT5E‑ZUMLINK‑P) or Zūm Net (CBL‑CAT5E‑ZUMNET‑P) CAT5e cable. Nonsystem occupancy, vacancy, or daylight sensors may also be installed in a Zūm space wired to the a load controller.
Easy Commissioning
Finish the installation by quickly commissioning the room through the Zūm app. Expedite commissioning by copying a room configuration and sending it to an identical room. Save a room configuration template and share it via the ZUM‑HUB4 or the Zūm app. The ZUMLINK‑KP Bluetooth® connection is required to configure a Zūm wired space with the Zūm app.
Key Features
- Ceiling-mount presence sensor
- Dual-technology (passive infrared and ultrasonic) motion detection
- 360 degree coverage pattern
- Fully digital circuitry for low cost and high reliability
- Built-in closed loop daylight sensor
- Control system communications the Zūm® Link network
- Compatible with Zūm wired keypad
- For the -RLY models, additional relays included for input-relay capable devices
| Load Control |
| Control Output |
1A @ 30VAC/VDC |
| Zūm Link Power Bus Requirements |
| Max Current Consumption |
28 mA |
| Dual Technology Detection |
| Sensing |
Passive Infrared (PIR) and ultrasonic (40 kHz) |
| Coverage |
360° |
| Sensors |
Single infrared pyroelectric detector |
| Detection Zones |
Presence: Major motion as described by NEMA WD7;
PIR: Maximum: 50 x 40 ft (2,000 sq ft)/
15 x 12 m (180 sq m);
US: Maximum: 40 x 30 fct (1,200 sq ft)/
12 x 9 m (108 sq m) |
| Light Level Setting |
10-1000lux / 1-100 fc |
| Controls & Indicators |
| LED |
(3) Blue LEDs on the sensor head frontplate
Flashes upon start up and when triggered to identify itself |
| Connections |
| ZUMLINK |
(2) RJ-45 orange ports;
In-room Zūm Link device daisy-chaining;
Maximum 750mA pass-through current including any internal power supply |
Output Relays
(Relay models only) |
(1) Green: Normally open
(1) Blue: Normally closed
(1) Red: Common |
| Environmental |
| Temperature |
32° to 104°F (0° to 40°C) |
| Rating |
IP20 rated |
| Enclosure |
| Material |
Plastic |
| Mounting |
Mount directly in the ceiling, 4 in. square or round junction boxes (not included), or 3 in. mud rings (not included) |
| Dimensions |
| Height |
4.73 in. (121 mm) |
| Width |
4.73 in. (121 mm) |
| Depth |
2.63 in. (67 mm) |
| Compliance |
Regulatory Mode: M202111002
UL® Listed |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.