Products

    Pages

        DIN-SACN-DMX

        ENTTEC DIN-ODE POE Mk2 – Ethernet to DMX Converter

        Simplifies integration between a Crestron® 3-Series® lighting control system and any DMX lighting fixture or controller. Enables distribution of DMX over Ethernet or Wi-Fi® via sACN, Art-Net, or ESP.

        The ENTTEC DIN-ODE POE Mk2 (sold by Crestron® as model DIN-SACN-DMX) is a cost-effective and reliable Ethernet to DMX convertor. It supports sACN, Art-Net, and ESP protocols, and is designed to enable integration between DMX and network controllable lighting devices and systems. As part of a Crestron architectural lighting system, it allows a 3-Series® control processor to communicate via sACN with any DMX lighting fixture or controller.

         
        Key Features
        • Converts between DMX512A and sACN, Art-Net, or ESP protocols
        • Enables distribution of DMX over Ethernet or Wi-Fi®
        • Enables Crestron® control of DMX lighting fixtures and systems
        • Supports a single universe Ethernet to DMX node in output mode
        • Supports a single universe DMX to Ethernet node in input mode
        • Supports broadcast or unicast (unicast in input mode only)
        • Supports HTP/LTP merging of up to 2 DMX sources (output mode only)
        • Supports RDM over Art-Net
        • Easy web browser based setup and firmware update
        • 4U 35 mm DIN rail mountable
        • PoE or 7-24 Volt DC powered (power supply not included)

        This product may be purchased from an authorized Crestron dealer or distributor. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

        Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at https://www.crestron.com/Partners/Partnership-Programs/Commercial-Lighting-Consultants. For assistance with incorporating this product into a design or specification, please contact the Commercial Lighting Consultant Hotline via email at clcdesign@crestron.com or by calling 888-330-1502.

        Crestron, the Crestron logo, and 3-Series are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Wi-Fi is either a trademark or registered trademark of Wi-Fi Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2018 Crestron Electronics, Inc.

         
        Protocols
        Ethernet sACN, Art-Net 3, ESP, RDM
        DMX DMX512A
        Connectors
        OUTPUT (1) 3-pin 3.5 mm detachable terminal block;
        DMX output or input
        DC POWER INPUTS (1) 2.1 x 5.5 mm DC power connector and (1) 2-pin 3.5 mm detachable terminal block;
        7-24 Volts DC power input
        LAN PoE (1) 8-pin RJ45 connector, female;
        10Base-T/100Base-TX Ethernet LAN port
        Indicators
        STAT (1) LED, indicates operational status
        DIR (1) LED, indicates DMX port is in Output mode
        LINK (1) LED, indicates Ethernet link status
        ACT (1) LED, indicates Ethernet activity
        Termination (1) DIP switch (behind cover) for DMX bus termination
        Power
        DC Power 300 mA nominal (1 Amp maximum) @ 7 to 24 Volts DC;
        Power supply not included
        Power over Ethernet IEEE 802.3at Type 1 (802.3af compatible) PoE Powered Device
        Environmental
        Temperature 32° to 122° F (0° to 50° C)
        For indoor use only
        Construction
        Housing Aluminum
        Mounting 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 4 DIN module spaces (72 mm)
        Dimensions
        Height 4.21 in (107 mm)
        Width 2.71 in (69 mm)
        Depth 2.24 in (57 mm)
        Weight
        7.41 oz (210 g)
        Click here to search product certificates.

        This product may be purchased from an authorized Crestron dealer or distributor. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

        Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at https://www.crestron.com/Partners/Partnership-Programs/Commercial-Lighting-Consultants. For assistance with incorporating this product into a design or specification, please contact the Commercial Lighting Consultant Hotline via email at clcdesign@crestron.com or by calling 888-330-1502.

        Crestron, the Crestron logo, and 3-Series are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Wi-Fi is either a trademark or registered trademark of Wi-Fi Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2018 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.