GLXP-SW10
Add to Favorites

GLXP-SW10

10 Channel Switch Module

Material Number: 6501949

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

Replace With GLXP-SW16-LP

  • 10 channels of power switching
  • Mechanically-latching relays
  • Supports 100 to 277 Volt applications
Have a question?
Add to a Project
Find a Dealer

The GLXP-SW10 is a Crestron® Green Light® switching module which features 10 channels of power switching with rugged, high-current latching relays. The module is part of a complete Crestron engineered GLPS

Green Light switching panel.

For more information on Crestron Green Light commercial lighting products, please contact Crestron Sales Support Services.

 
Key Features
  • 10 channels of power switching
  • Mechanically-latching relays
  • Supports 100 to 277 Volt applications
  • 16 Amp, 1 HP load rating per channel
  • Positive air gap at each output
  • Phase-independent channels
  • Cresnet® communications
  • Redundant power capability—module powered via line or Cresnet
  • Local controls for testing and verification
  • Local and remote override capability
  • Non-volatile power failure memory
  • GLEP cabinet installation
 
CrestronHome
Load Ratings
  Switch Channels 10
  Per Channel 16 Amps @ 100 to 277 Volts AC, 50/60 Hz;
0.5 HP @ 120 Volts, 1 HP @ 230 Volts, 1 HP @ 277 Volts
  Switch Load Types Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent Ballast, High-Intensity Discharge, LED, Motor
  Relay Lifetime Resistive rating: 100,000 on/off operations, 50A @ 277 VAC
General rating: 50,000 on/off operations, 16A @ 120/277 VAC
Power Requirements
  Primary 100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
  Secondary (optional) 5 watts at 24 Volts DC, supplied via Cresnet®
Connectors
  NET (2) 5-pin headers; connect to adjacent module or internal connecting block using interconnect cable (block and cable provided)
  N1 (1) terminal block, line input neutral
  L1-L10 (10) terminal blocks, line power inputs
  SW1-SW10 (10) terminal blocks, switch channel outputs
  Note: Line power terminal blocks accept 10-14 AWG wire; torque to 4.43 lb-in (0.5 Nm);
Controls & Indicators
  NET ID (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID;
  SETUP (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID
  OVR (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
  PWR (1) Green LED; solid illumination indicates line power is applied to N1 and L1; flashing indicates Cresnet power is supplied in absence of line power
  NET (1) Yellow LED; indicates communication with control processor
  RESET (1) Recessed miniature pushbutton, resets internal processor
  ON/OFF (10) Red LEDs and (10) miniature pushbuttons for individual manual channel activation
Enclosure
  Surface mount module with (2) integral mounting flanges; mounts in a GLEP enclosure
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 136 BTU/Hr
Dimensions
  Height 7.5 in (191 mm)
  Width 9.5 in (241 mm)
  Depth 4.78 in (121 mm) including standoffs
Electrical Regulatory Certifications
  UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
  UL924, Emergency Power Equipment
  IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or other capacitive loads)
  SCCR Rating - 18kA
  CE
Click here to search product certificates.
Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.