The CL‑SPACEBUILDER‑CAEN‑FT SpaceBuilder® system is ideal for spaces where distributed or wireless controls are not appropriate. CL‑SPACEBUILDER‑CAEN‑FT is great for spaces that do not have accessible ceilings such as auditoriums, warehouses, sports venues, and large parking structures. The CL‑SPACEBUILDER‑CAEN‑FT is a quickly configured and shipped feed-through panel solution that supports all analog dimming loads.
Configure and order the CL‑SPACEBUILDER‑CAEN‑FT SpaceBuilder® system at www.crestron.com/spacebuilder.
Module Options:
Dimming Modules
2‑Wire Forward Phase Dimming
Deploy 4 A, 2-wire forward phase dimmed loads using the GL-CAEN-2DIM8 KIT. The GL-CAEN-2DIM8 KIT accepts two 20 A inputs that support four 1,920 W (15 A) lighting zones. This module accepts 120 VAC and has a maximum rating of 3,480 W (32 A).
2‑Wire Universal Phase Dimming
Deploy 4 A, 2-wire forward or reverse phase dimmed loads using the GL‑CAEN‑2DIMU8 KIT. Each output auto‑detects forward or reverse phase dimming operation. The GL‑CAEN‑2DIMU8 KIT accepts two 20 A inputs that support four 480 W (4 A) lighting zones. This module accepts 120 VAC power and has a maximum rating of 3,480 W (32 A).
4‑Wire 0–10 V Dimming
Deploy 4 A, 4-wire forward phase dimmed loads, or 4-wire switched loads, using the GL‑CAEN‑DIMFLV8 KIT. The GL‑CAEN‑DIMFLV8 KIT accepts two 20 A inputs that support four 4 A lighting zones . This module accepts 120 VAC power and has a maximum rating of 32 A.
Switching Module
Deploy 16 A, 2-wire switched loads using the GL‑CAEN‑4HSW4 KIT. The GL‑CAEN‑4HSW4 KIT accepts four 20 A inputs that support four 16 A lighting zones. This module accepts 120 VAC power and has a maximum rating of 64 A.
Processor Module
The processor module consists of a DIN‑AP4 and a DIN‑PWS60 which are mounted to a DIN rail. The DIN-AP4 is a Crestron® 4-Series® Control engine that provides fast and powerful control of the lighting system. The DIN-AP4 controls connected modules and supports astronomical time-clock control, 40 Cresnet® control devices, and 50 BACnet™/IP points. The DIN‑PWS60 supplies power to the DIN‑AP4.
Ethernet Uplink Module
The Ethernet uplink module consists of a DIN-CENCN-2-POE and DIN‑PWS60 which are mounted to a DIN rail. The DIN-CENCN-2-POE is an Ethernet to Cresnet network bridge that provides scalability to CL‑SPACEBUILDER systems. The DIN‑CENCN‑2‑POE receives commands from a DIN-AP4 control system to provide control for the connected modules and to pass commands through to additional CL‑SPACEBUILDER systems. The DIN-PWS60 supplies power to the DIN‑CENCN‑2.
Options:
Assembly
CL‑SPACEBUILDER‑CAEN‑FT systems are assembled in Crestron’s UL508 panel shop. The system can also be ordered as individual components that are shipped independently and require on-site assembly.
Voltage
The CL‑SPACEBUILDER‑CAEN‑FT is available in 120 or 277 VAC feed through styles.
Networking
For easy scalability, CL‑SPACEBUILDER‑CAEN‑FT systems can be configured to use Ethernet or Cresnet communication