| Power |
| IN 1 |
12 to 24VDC, 5A max (60 to 100 W max) Class 2;
Power pass-through to OUTPUT-1 |
| IN 2 |
12 to 24VDC, 5A max (60 to 100 W max) Class 2;
Power pass-through to OUTPUT-2 |
| Load Ratings |
| Maximum per Channel |
5A max per individual RGBW output channel;
5A max per RGBW output group |
| Module Total |
10A max |
| Load Types |
12–24VDC PWM controlled anode RGBW or single color LEDs and LED strips |
| Dimming Range |
0–100% |
| PWM Frequency |
120-1200 Hz;
301 Hz (default) |
| Dimming Curve |
Linear and logarithmic |
| Communications |
| Cresnet |
Cresnet secondary mode |
| Connectors |
| NET |
(2) 4-pin 3.5 mm detachable terminal blocks, paralleled;
Cresnet® secondary port;
24VDC power input |
| OVERRIDE |
(2) 2-pin 3.5 mm detachable terminal blocks, paralleled;
Sensing input for external low-voltage contact closure;
Activates override mode when a closure is present;
Minimum Closure Rating: 10mA (per module) at 24V |
| IN 1 |
(1) set of (2) captive screw terminals;
Power input and power passthrough to OUTPUT-1;
Use a 12-24VDC, 5A max (60-100W max) Class 2 power supply (DIN-PWS60, not included);
Ensure proper polarity;
Wire Size: 18-12 AWG |
| IN 2 |
(1) set of (2) captive screw terminals;
Power input and power passthrough to OUTPUT-2;
Use a 12-24VDC, 5A max (60-100W max) Class 2 power supply (DIN-PWS60, not included);
Ensure proper polarity;
Wire Size: 18-12 AWG |
| OUTPUT-1 |
(1) set of (8) captive screw terminals;
R+, G+, B+, and W+ terminals are pass-through power from IN 1 +;
R1, G2, B3, and W4 terminals are PWM dimming control for the R, G, B, and W channels;
Wiring from OUTPUT-1 must remain separate from OUTPUT-2;
Wire Size: 18–14 AWG;
Maximum Wire Length: 100 ft (30 m) |
| OUTPUT-2 |
(1) set of (8) captive screw terminals;
R+, G+, B+, and W+ terminals are pass-through power from IN 2 +;
R5, G6, B7, and W8 terminals are PWM dimming control for the R, G, B, and W channels;
Wiring from OUTPUT-2 must remain separate from OUTPUT-1;
Wire Size: 18–14 AWG;
Maximum Wire Length: 100 ft (30 m) |
| Controls and Indicators |
| SETUP |
(1) Red LED and (1) recessed miniature pushbutton;
For enabling setup mode and Touch-Settable ID (TSID) |
| OVR |
(1) Red LED;
Indicates unit is in override mode |
| PWR |
(1) Green LED;
Indicates DC power is supplied to the NET port |
| NET |
(1) Yellow LED;
Indicates communication with the control processor |
| RESET |
(1) Recessed miniature pushbutton;
Resets internal processor |
| OUTPUT-1 |
(4) Red LEDs and (4) miniature pushbuttons, (1) per R, G, B, W channel;
LED lights to indicate that the channel is on;
All LEDs light when in override mode |
| OUTPUT-2 |
(4) Red LEDs and (4) miniature pushbuttons, (1) per R, G, B, W channel;
LED lights to indicate that the channel is on;
All LEDs light when in override mode |
| Environmental |
| Temperature |
32° to 104°F (0° to 40°C) |
| Humidity |
10% to 90% RH (noncondensing) |
| Heat Dissipation |
6.8 BTU/Hr |
| Construction |
| Enclosure |
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated |
| Mounting |
35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 6 DIN module spaces (108 mm) |
| Dimensions |
| Height |
3.67 in. (94 mm) |
| Width |
4.24 in. (108 mm) |
| Depth |
2.34 in. (59 mm) |
| Weight |
| 6.4 oz (181 g) |
| Compliance |
| CE, ETL Recognized Component, FCC Part 15 Class B, CAN ICES-3 (B)/NMB-3(B) |