Products

    Pages

        CLXI-2DIMFLV8

        0-10 Volt 8 Channel Dimmer Module, 2 Feeds, 230V

        The CLXI-2DIMFLV8 provides 8 channels of 0-10 Volt dimming control for fluorescent ballasts and LED drivers.


        Module shown with CLTI-Series Terminal block on left.

        As part of a complete Crestron® lighting system, the CLXI-2DIMFLV8 lighting control module provides 8 channels of 0-10 Volt dimming control for fluorescent ballasts and LED drivers. The CLXI-2DIMFLV8 is actually composed of two independent 4-channel dimmers in a single module. Each channel is rated for 20 Amps, with a total module rating of 40 Amps when fed from two separate 20 Amp feeds. Air-gap relays are provided on every channel output, allowing individual circuits to be serviced without disabling the entire module.

        CLXI Series dimmers are rigorously built for ultimate reliability. Split-bobbin transformers and ground referenced electronics deliver superior performance. Lamp flicker is minimized through Crestron's innovative zero-crossing detection technique backed by proprietary firmware. Low-maintenance convection cooling assures quiet and trouble-free operation.

        An override feature allows each channel to be adjusted to a preset state during setup. In the event that Cresnet® communications should be disrupted for any reason, a simple contact closure can be used to activate the override presets on a global or semi-global basis.

        The CLXI-2DIMFLV8 occupies a single module space in any CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLTI-2DIMFLV8 terminal block, sold separately to enable termination of the wiring any time prior to installing the module. CLXI modules are controlled by the CLX-DIN-AP3 or other 3-Series® control system via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).

         
        Key Features
        • 8 channels of 0-10 Volt dimming control for fluorescent ballasts and LED drivers
        • Two independent 4-channel dimmers in a single module
        • Dual or single 230 Volt feed
        • Arcless switching
        • Air-gap relays on every channel output
        • Override preset capability
        • Convection cooled
        • Occupies 1 module space in a CAEN or CAENIB automation enclosure
        • Easy termination using CLTI Series terminal block
        • CEC Title 24 2013 Compliant

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, and 3-Series are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        Load Ratings
          Dimmer Channels 8
          Per Channel 20 Amps
          Per Group Channels 1-4: 20 Amps;
        Channels 5-8: 20 Amps
          Module Total 40 Amps
          Load Types 0-10 Volt fluorescent ballast or LED driver (4-wire)
        Power Requirements
          220-240 Volts AC, 50/60Hz, line power
        Connectors on Module
          Module Interconnect (2) 5-pin 0.156 inch headers;
        Cresnet/Override interconnect ports;
        Each connects to a CAEN-BLOCK or the adjacent CLXI-Series module using the interconnect cable provided
        Connections via CLTI Terminal Block (sold separately)
          LINE 1 – 2 (2) DIN rail terminal blocks, brown, line power inputs
          DIM 1 – 8 (8) DIN rail terminal blocks, red, channel outputs
          N IN 1 – 2 (2) DIN rail terminal blocks, blue, line input neutrals
          N OUT 1 – 8 (8) DIN rail terminal blocks, blue, channel output neutrals
        Buttons
          SETUP (1) Pushbutton, for manual channel activation and TSID
        Indicators
          PWR (1) Green LED, indicates line power is applied to the LINE 1 terminal
          NET (1) Yellow LED, indicates communication with the control system
          1 – 8 (8) Red LEDs, each indicates the state of the corresponding channel
          SETUP (1) Red LED, indicates unit is in setup/manual mode
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 45 BTU/hr
        Enclosure
          Gray metal, surface mount module with (2) integral mounting flanges;
        Occupies 1 module space in any CAEN or CAENIB enclosure
        Dimensions
          Height 6.92 in (176 mm)
          Width 6.70 in (153 mm)
          Depth 3.32 in (84 mm)
        Weight
          3.15 lbs (1.43 kg)
        Standards & Certifications
          UL Listed, CEC Title 24 2013 Compliant
        Click here to search product certificates.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, and 3-Series are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.