3-Series® Control Processor Card Interface – 3 Slot
Provides a control port expansion solution using up to three 3-Series® Control Cards.
The Crestron® CEN-CI3-3 is a single-space rack-mountable device designed to provide a versatile control interface and expansion solution using up to three 3-Series® Control Cards. It is used to expand the control ports of a 3-Series Control System®, and can be installed with the control system at the central equipment cabinet, or located remotely near the device(s) under control. It can be placed on a shelf or rack-mounted using the rack ears included. It interfaces with the control system via Ethernet.
The CEN-CI3-3 accepts three 3-Series control cards (sold separately). Control cards are available to support bidirectional RS-232, 422, or 485; IR or 1-way serial; 0-10V analog inputs; digital logic inputs or outputs; and low-voltage relay outputs.[1]
Key Features
- Accepts up to three 3-Series® Control Cards
- Provides control port expansion for any 3-Series Control System®
- External power pack included
- Single-space 19-inch rack-mountable
| Communications |
| |
Ethernet |
10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP |
| |
USB |
For computer console |
| Connectors & Card Slots |
| |
S1 – S3 |
(3) 3-Series® control card expansion slots |
| |
CONTROL SUBNET IN |
(1) 8-wire RJ45 jack;
10Base-T/100Base-TX/1000Base-T Ethernet port |
| |
CONTROL SUBNET OUT |
(1) 8-wire RJ45 jack;
10Base-T/100Base-TX/1000Base-T Ethernet port |
| |
24VDC 2A MAX |
(1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2420RU power pack included |
| |
G |
(1) 6-32 screw, chassis ground lug |
| |
COMPUTER (front) |
(1) USB Type B female;
USB 2.0 computer console port (6 ft cable included);
For setup only |
| Controls & Indicators |
| |
PWR |
(1) Green LED, indicates operating power supplied from power pack |
| |
MSG |
(1) Red LED, indicates unit has generated an error message |
| |
RESET |
(1) Recessed pushbutton for hardware reset |
| |
SETUP |
(1) Recessed pushbutton with red LED for Ethernet auto-discovery |
| |
SLOT 1 – 3 |
(3) Green LEDs, indicate control cards are inserted in the corresponding slots |
| |
CONTROL SUBNET IN (rear) |
(2) Bi-color green/amber LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity |
| |
CONTROL SUBNET OUT (rear) |
(2) Bi-color green/amber LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity |
| Power Requirements |
| |
Power Pack |
2.0 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included |
| Environmental |
| |
Temperature |
41° to 113° F (5° to 45° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
6 BTU/Hr without cards [1] |
| Enclosure |
| |
Chassis |
Metal, black finish, vented yop and sides |
| |
Front Panel |
Metal, black finish, polycarbonate label overlay |
| |
Mounting |
Freestanding or 1RU 19-inch rack-mountable (adhesive feet and rack ears included) |
| Dimensions |
| |
Height |
1.70 in (44 mm) without feet |
| |
Width |
17.28 in (439 mm);
19.00 in (483 mm) with rack ears |
| |
Depth |
10.06 in (256 mm) |
| Weight |
| |
5.0 lb (2.3 kg) without cards |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.