Shade and Drape Controller, 2 outputs for 24 VDC 2-wire bidirectional motors
The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes.
The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes. The C2N-SDC-DC is a Cresnet® device with two independently controlled 24V DC outputs, each designed to provide standard up/down or open/close control of a conventional two-wire bidirectional type motor.
The C2N-SDC-DC mounts in the wall or ceiling using an off-the-shelf 4" square or 2-gang electrical box. Pushbuttons on the front of the unit allow for manual operation of the motors during installation and setup.
| Load Ratings |
| |
Motor Control Channels |
2 |
| |
Per Channel |
30 Watts (1.25 Amps) @ 24 Volts DC |
| |
Total |
30 Watts (1.25 Amps) @ 24 Volts DC |
| |
Load Type |
2-Wire 24V DC bidirectional motors, Somfy® LT28B or similar |
| Power Requirements |
| |
Cresnet Power Usage |
Up to 33 Watts (1.38 Amps @ 24 Volts DC) depending on motor load, dedicated power supply recommended |
| Connections – Front Panel |
| |
AB 1 – 2 |
(2) 2-pin 3.5mm detachable terminal blocks providing (2) 24V DC 2-wire bidirectional motor control outputs |
| |
NET |
(1) 4-pin 3.5mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network |
| Buttons |
| |
1 UP/DOWN |
(2) buttons for local control of output #1 |
| |
2 UP/DOWN |
(2) buttons for local control of output #2 |
| |
SETUP |
(1) button used for touch-settable ID (TSID) |
| LED Indicators |
| |
PWR |
(green) Indicates DC power supplied from Cresnet network |
| |
NET |
(yellow) Indicates communication with the Cresnet system |
| |
SETUP |
(red) used for touch-settable ID (TSID) |
| Environmental |
| |
Temperature |
41° to 122°F (5° to 50°C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| Enclosure |
| |
Flat metal plate mountable in a 4-inch square or 2-gang electrical box, 1.5 inch minimum depth |
| Dimensions |
| |
Height |
4.10 in (104.2 mm) |
| |
Width |
4.10 in (104.2 mm) |
| |
Depth |
1.16 in (29.5 mm) |
| Weight |
| |
0.55 lb (0.25 kg) |
| Compliance |
| |
ETL Listed for the United States and Canada to UL 924 and CSA C22.2 No. 141. |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.