The CL‑SPACEBUILDER‑GLEX‑FT SpaceBuilder® system is a quickly configured and shipped feed-through panel solution that is great for spaces that do not have accessible ceilings such as auditoriums, warehouses, sports venues, and large parking structures. The CL‑SPACEBUILDER‑GLEX‑FT is a quickly configured and shipped feed-through panel solution that supports very large spaces.

 

Module Options:

Dimming Modules

2‑Wire Forward Phase Dimming
Deploy 16 A, 2-wire forward phase dimmed loads using the GLXX‑2DIM8. The GLXX-2DIM8 accepts two 20 A inputs that support eight 16 A lighting zones. This module accepts 100–277 VAC power and has a maximum rating of 32 A. Each input can be from a different phase.

4‑Wire 0–10 V Dimming
Deploy 16 A, 0–10 V dimmed loads, or 4-wire switched loads, using the GLXP-DIMFLV8-LP. The GLXP-DIMFLV8-LP accepts eight 20 A inputs that support eight 16 A lighting zones. This module accepts 120–277 VAC power.
 

Switching Modules

16‑Channel Switching (100,000 Cycle)
Deploy 16 A, 2-wire, 100,000 cycle switched loads using the GLXP-SW16-LP. The GLXP-SW16-LP accepts sixteen 20 A inputs that support sixteen 16 A lighting zones. This module accepts 100–277 VAC power.

12‑Channel Switching (1,000,000 Cycle)
Deploy 16 A, 2-wire, 1,000,000 cycle switched loads using the GLXP‑SW12‑LP. The GLXP‑SW12‑LP accepts twelve 20 A inputs that support twelve 16 A lighting zones. This module accepts 100–277 VAC power.
 

Processor Module

The processor module consists of a DIN‑AP4 and a DIN‑PWS60 which are mounted to a DIN rail. The DIN-AP4 is a Crestron® 4-Series® Control engine that provides fast and powerful control of the lighting system. The DIN-AP4 controls connected modules and supports astronomical time-clock control, 40 Cresnet® control devices, and 50 BACnet™/IP points. The DIN‑PWS60 supplies power to the DIN‑AP4.
 

Ethernet Uplink Module

The Ethernet uplink module consists of a DIN-CENCN-2-POE and DIN‑PWS60 which are mounted to a DIN rail. The DIN-CENCN-2-POE is an Ethernet to Cresnet network bridge that provides scalability to CL‑SPACEBUILDER systems. The DIN‑CENCN‑2‑POE receives commands from a DIN-AP4 control system to provide control for the connected modules and to pass commands through to additional CL‑SPACEBUILDER systems. The DIN-PWS60 supplies power to the DIN‑CENCN‑2.
 

Options:

Assembly

CL‑SPACEBUILDER‑GLEX‑FT systems are assembled in Crestron’s UL508 panel shop. The system can also be ordered as individual components that are shipped independently and require on-site assembly.
 

Voltage

The CL‑SPACEBUILDER‑GLEX‑FT is available in 120 or 277 VAC feed through styles.
 

Networking

For easy scalability, CL‑SPACEBUILDER‑GLEX‑FT systems can be configured to use Ethernet or Cresnet communication.