Master photo:QM-DA-16
Add to Favorites

QM-DA-16

1 to 16 QuickMedia Distribution Amplifier

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

  • 1 to 16 QuickMedia signal distribution amp
  • Easy single-cable connections
  • Built-in Cresnet hub/repeater
Have a question?
Add to a Project
Find a Dealer

The QM-DA-16 is a 16-output QuickMedia distribution amplifier designed to distribute a single QM signal to up to 16 QuickMedia Receivers. All signal distribution is provided over inexpensive CAT5e type cable* via Crestron's exclusive QuickMedia transport, supporting high-resolution RGB, video, stereo audio and microphone signals up to a total of 450 feet end-to-end.

Up to two QuickMedia Distribution Amplifiers, Matrix Switchers, and Distribution Centers may be cascaded in a given QuickMedia signal path* to support versatile system configurations. For instance, a QM-DA-16 may be used to expand the output capacity of a QM-MD4X2 to feed a single output signal to sixteen different displays.

Every QuickMedia port on the rear panel is accompanied by a Cresnet port with 24V DC power distribution built in to simplify termination of the QuickMedia and Cresnet wiring. A built-in Cresnet hub provides 3 isolated segments, each supporting 3000 feet of Cresnet cabling and approximately 20 Cresnet devices.

 
Key Features
  • 1 to 16 QuickMedia signal distribution amp
  • Easy single-cable connections
  • Built-in Cresnet hub/repeater
  • No control or adjustments necessary
  • Single-space rack-mountable
 
Video
  DA 1 to 16 distribution amp; distributes QM video input signal to all of (16) QM outputs
  Gain 0dB
Audio
  DA 1 to 16 distribution amp; distributes QM audio input signal to all of (16) QM outputs
  Gain 0dB
Connectors
  QM IN (1) 8-wire RJ45 female and (1) 4-pin 3.5mm detachable terminal block comprising (1) QuickMedia input port with Cresnet;
Connects to Cresnet and QM output port of another QuickMedia device via CresCAT-QM cable*
  QM OUT (16) 8-wire RJ45 female and (16) 4-pin 3.5mm detachable terminal blocks comprising (16) QuickMedia output ports with Cresnet;
Connect to Cresnet and QM input ports of other QuickMedia devices via CresCAT-QM cable*
  24/G (4) 2-pin 5mm detachable terminal blocks providing (1) power connector per every (4) output NET ports;
Receive 24 Volts DC from external Cresnet power supplies;
Maximum Load: 75 watts each
  NET (1) 4-pin 5mm detachable terminal block;
Cresnet slave port; connects to Cresnet control network;
Power input for QM-DA-16 and input NET port
  Ground (1) 6-32 screw, chassis ground lug
LED Indicators
  PWR (1) green LED, indicates 24 Volts DC power supplied from Cresnet control network
Power Requirements
  Cresnet Power Usage 24 Watts (1.0 Amps @ 24 Volts DC)
Environmental
  Temperature 41° to 104°F (5° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 81 BTU per hour
Enclosure
  Chassis Steel, black matte powder coat finish, convection-cooled, vented top and sides
  Faceplate Extruded aluminum, black matte powder coat finish with polycarbonate label overlay
  Mounting Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
  Height 1.70 in (4.32 cm)
  Width 17.03 in (43.25 cm);
19.0 in (48.26 cm) with ears
  Depth 10.14 in (25.75 cm)
Weight
  4.77 lb (2.16 kg)

* For QuickMedia wiring use CresCAT-QM, CresCAT-IM, or quality CAT5e/CAT6 cable with a delay skew of ≤15nS per 100m; the maximum aggregate cable length and delay skew between any QM transmitter (origination point) and QM receiver (endpoint) is 450 ft (137 m) and 22 nS; a maximum of two QM midpoint devices may be inserted in a given QM signal path; exceptions apply, refer to each respective product manual for full detail.

Click here to search product certificates.
Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.