Master photo:GLXP-HSW12
Add to Favorites

GLXP-HSW12

12 Channel High-Inrush Switch Module

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

Replace With GLXP-HSW12-LP

  • 12 channels of high-inrush power switching
  • Rugged, high-current latching relays
  • Supports 100 to 277 Volt applications
Have a question?
Add to a Project
Find a Dealer

The GLXP-HSW12 is a Crestron® Green Light® switching module which features 12 channels of high-inrush power switching with rugged, high-current latching relays. The module is part of a complete Crestron engineered GLPS

Green Light switching panel.

For more information on Crestron Green Light commercial lighting products, please contact Crestron Sales Support Services.

 
Key Features
  • 12 channels of high-inrush power switching
  • Rugged, high-current latching relays
  • Supports 100 to 277 Volt applications
  • 16 Amp, 1 HP load rating per channel
  • Arc-less switching
  • Positive air gap at each output
  • Phase-independent channels
  • Cresnet® communications
  • Redundant power capability—module powered via line or Cresnet
  • Local controls for testing and verification
  • Local and remote override capability
  • Non-volatile power failure memory
  • GLEP cabinet installation
 
CrestronHome
Load Ratings
  Switch Channels 12
  Per Channel 16 Amps @ 100 to 277 Volts AC, 50/60 Hz;
0.5 HP @ 120 Volts, 1 HP @ 230 Volts, 1 HP @ 277 Volts
  Switch Load Types Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, Fluorescent Ballast, High-Intensity Discharge, LED, Motor
  Relay Lifetime 1,000,000 on/off operations at full electronic ballast load
Power Requirements
  Primary 100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
  Secondary (optional) 5 watts at 24 Volts DC, supplied via Cresnet®
Connectors
  NET (2) 5-pin headers; connect to adjacent module or internal connecting block using interconnect cable (block and cable provided)
  N1 (1) terminal block, line input neutral
  L1-L12 (12) terminal blocks, line power inputs
  SW1-SW12 (12) terminal blocks, switch channel outputs
  Note: Line power terminal blocks accept 10-14 AWG wire; torque to 4.43 lb-in (0.5 Nm);
Controls & Indicators
  NET ID (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID;
  SETUP (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID
  OVR (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets
  PWR (1) Green LED; solid illumination indicates line power is applied to N1 and L1; flashing indicates Cresnet power is supplied in absence of line power
  NET (1) Yellow LED; indicates communication with control processor
  RESET (1) Recessed miniature pushbutton, resets internal processor
  ON/OFF (12) Red LEDs and (12) miniature pushbuttons for individual manual channel activation
Enclosure
  Surface mount module with (2) integral mounting flanges; mounts in a GLEP enclosure; (-LP) mounts in a GLEX enclosure
Environmental
  Temperature 32° to 104°F (0° to 40°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 160 BTU/Hr
Dimensions
  Height 11.07 in (282 mm)
  Width 9.5 in (241 mm) including mounting holes
  Depth 4.78 in (121 mm) including standoffs
  Depth (-LP only) 3.07 in (78 mm)
Electrical Regulatory Certifications
  UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
  UL924, Emergency Power Equipment
  IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for fluorescent lamp circuits or other capacitive loads)
  SCCR Rating - 18kA
  CE
Click here to search product certificates.
Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.