Master photo:DM-CBL-D-NP
Add to Favorites

DM-CBL-D-P-SP500

DigitalMedia™ D Cable, plenum, 500 ft spool

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

Provides a DigitalMedia upgrade path for existing systems using QuickMedia or CresCAT cabling, and enables wiring for DigitalMedia through smaller conduits.

Have a question?
Add to a Project
Find a Dealer

Crestron DM-CBL-D-P is a special "D-only" version of our standard DigitalMedia Cable (DM-CBL-P). It is designed to afford a DigitalMedia upgrade path for existing systems by converting existing QuickMedia™ (QM) or Crestron Home® CAT5 Balanced AV (CH) wiring to handle DigitalMedia (DM) signals. It also allows wiring for DM to fit in a 3/4 inch conduit by running one DM-CBL-D-P along with one CAT5e and one piece of Cresnet® control cable (CRESNET-P).

A QM system is typically wired using CRESCAT-QM-P QuickMedia Cable, while a CH system commonly uses CRESCAT-NP Crestron Home CAT5 AV Cable. Either of these cable types is perfectly suited for handling the "M" and "DMNet" portions of a DM signal. All that's missing is the high-bandwidth/low-crosstalk "D" cable, which is easily added by installing a single piece of DM-CBL-D-P alongside the existing cable, forming the equivalent of a single run of standard DigitalMedia Cable.[1]

Refer to the DM-CBL-P specification for complete information about standard DigitalMedia Cable.

Crestron DM-CBL-D-P cable is plenum-rated for use in commercial applications. For non-plenum applications, use DM-CBL-D-NP.

 
  • The maximum allowable cable length depends on multiple factors. One or more DM Repeaters (Model DM-DR) may be required. Refer to the Crestron DigitalMedia Design Guide, Doc. #4789 for complete wiring guidelines.
 
Construction
  Four twisted pair, each pair isolated by an internal spline within an inner jacket, shield, braid, and overall jacket
(4) Twisted Pairs
  Colors Blue/white, orange/white, green/white, brown/white
  Conductors 24 AWG x8 solid copper
  Insulation 0.0055 inch thick FEP
  Outer Diameter (per conductor) 1.028 ±0.02 mm
  Shield Aluminum/Mylar tape w/aluminum on the outside
  Braid Tin/copper (45% coverage)
  Mutual Capacitance 5600 pF / 100 m
  Capacitance Unbalance 330 pF / 100 m
  Characteristic Impedance 100 ohms ±15% (1-250 MHz)
Inner Jacket
  Color Natural
  Material Low-smoke PVC
  Thickness 0.015 inch
Outer Jacket
  Color Blue
  Material Low-smoke PVC
  Thickness 0.018 inch
  Outer Diameter 0.3 inch (7.62 mm) nominal
  Minimum Recommended Bend Radius 3.5 inches
  Maximum Pull Tension 28 lbf
Rating
  NEC Article 800; UL Subject 444, Type CMP; CSA Type CMP
Click here to search product certificates.
  • The maximum allowable cable length depends on multiple factors. One or more DM Repeaters (Model DM-DR) may be required. Refer to the Crestron DigitalMedia Design Guide, Doc. #4789 for complete wiring guidelines.
Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.