Master photo:CNRFGWA
Add to Favorites

CNRFGWA

433MHz 1-Way RF Gateway

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

An RF receiver that allows Crestron 433MHz 1-way RF wireless touchpanels and handheld remotes to communicate with a control system.

Have a question?
Add to a Project
Find a Dealer

The CNRFGWA Gateway is an RF receiver that allows Crestron® 433 MHz 1-way RF wireless touchpanels and handheld remotes to communicate with the control system via the Cresnet® network. Each CNRFGWA affords a range of approximately 300 feet. Extended range can be achieved by distributing multiple gateways throughout a structure. Each gateway behaves as a Cresnet slave device requiring just one Cresnet wire to each gateway location.[1]

The CNRFGWA is compatible with Crestron devices that transmit 1-way RF at 433 MHz only. For 418 MHz 1-way devices, use model CNRFGWA-418.

 
  1. For proper gateway placement and antenna orientation, consult the CNRFGWA Operations Guide or "Best Practices for Installation and Setup of Crestron RF Products" Reference Guide.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

Crestron, the Crestron logo, and Cresnet are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.

 
Wireless
  RF Receiver 433.92 (433) MHz 1-way RF, crystal locked
  Device Compatibility Supports up to 256 WPR-48 or CNRFHT remotes, or up to 16 ST-1550C or ST-1700C touch panels
  Range Up to 300 feet typical, subject to site-specific conditions and individual device capabilities[1]
  Minimum distance allowed between gateways is 50 feet
Connectors
  NET (1) 4-pin 5mm detachable terminal block, Cresnet slave port;
Connects to Cresnet control network
  ANTENNA (1) BNC female, connection for supplied antenna or optional high-performance antenna (CNANT sold separately);
Impedance: 50 Ohms
Controls & Indicators
  ID CODE (2) Rotary DIP switches, for setting the Cresnet ID
  SIGNAL (1) Red LED, indicates reception of a valid RF signal
  I.D. SELECT (1) Red LED, indicates communication established with control system
  NET PWR (1) Green LED, indicates DC power supplied from Cresnet network
Power Requirements
  Cresnet Power Usage 3 Watts (0.125 Amps @ 24 Volts DC)
Environmental
  Temperature 41° to 113°F (5° to 45°C)
  Humidity 10% to 90% RH (non-condensing)
Enclosure
  Black metal, freestanding[1]
Dimensions
  Height 7.28 in (185 mm);
15.20 in (387 mm) with antenna[1]
  Width 3.25 in (83 mm)
  Depth 1.35 in (35 mm)
Weight
  1.1 lb (0.5 kg)
Click here to search product certificates.
  1. For proper gateway placement and antenna orientation, consult the CNRFGWA Operations Guide or "Best Practices for Installation and Setup of Crestron RF Products" Reference Guide.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

Crestron, the Crestron logo, and Cresnet are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.

Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.