Saros® Sound Bar 200, Powered, Black
Provides enhanced audio performance for any flat panel display.
The Saros® SB-200-P is a stereo sound bar designed to provide enhanced audio performance for a flat panel display. Its full-range, front-firing speakers offer an improvement over the small, rear-facing speakers typical of many display devices. The bracket included with the sound bar allows for attachment to a wall surface, or the unit can be placed on a shelf below or above the display.
Built-in amplification allows for direct connection to the line-level audio output of the display device, or to the output of an audio preamp, switcher, mixer, tv tuner, codec, or Crestron DM® receiver.[1] The amplifier powers on automatically when an audio input signal is detected, and powers off if no signal is detected for several minutes.
The SAROS SB-200-P sound bar is ideally suited for use with the Crestron RL® 2 Group Collaboration System and other unified communication and videoconferencing systems. It is equally well-suited for use in any small to medium sized room or public space in a hotel, restaurant, museum, medical center, airport, office building, or residence.
Key Features
- High-quality, full-range amplified stereo sound bar
- Delivers enhanced sound quality and performance for use with any flat panel display
- Mounts to a wall or sits on a shelf
- Balanced or unbalanced stereo line-level audio input [1]
- Unbalanced stereo audio cable included
- Powers on and off automatically
- 100 to 240 Volt AC powered
| Features & Performance |
| Woofers |
(2) 3 inch (76 mm) polypropylene cone w/rubber surround |
| Passive Radiators |
(2) 3 x 4-3/8 inch (76 x 112 mm) polypropylene cone w/rubber surround |
| Tweeters |
(2) 1 inch (25 mm) polyester dome |
| Amplifier Power |
20 Watts per channel, stereo |
| Frequency Response |
100 Hz to 20 kHz (±3 dB) |
| Output Sensitivity |
83 dB SPL @ 1 meter, both channels driven @ 1 Watt each |
| Input Sensitivity |
0.75 Vrms per channel for full rated output |
| Go To Sleep Time |
20 minutes (±5 minutes) with no signal present |
| Wake Threshold |
5 mV (±2 mV) typical |
| Connectors |
| BALANCED AUDIO INPUTS |
(1) 5-pin 3.5 mm detachable terminal block;
Balanced stereo line-level audio input [1];
Maximum Input Level: 0.85 Vrms;
Input Impedance: 10k Ohms |
| UNBALANCED AUDIO INPUTS |
(2) RCA connectors, female;
Unbalanced stereo line-level audio input [1];
Maximum Input Level: 0.85 Vrms;
Input Impedance: 10k Ohms;
NOTE: Right-angle plugs may be required for wall mount applications. A 59 inch (150 cm) right-angle RCA to straight RCA stereo cable is included. |
| 100-240V~50/60Hz 50W |
(1) IEC 60320 C8 main power inlet;
Mates with removable power cord, included |
| Controls & Indicators |
| 100-240V~50/60Hz 50W |
(1) Rocker switch, turns main power on or off |
| PWR |
(1) Blue LED, indicates the main power switch is turned on |
| Power Requirements |
| Main Power |
50 Watts (500 mA maximum) @ 100-240 Volts AC, 50/60 Hz |
| Environmental |
| Temperature |
41° to 104° F (5° to 40° C) |
| Humidity |
10% to 90% RH (non-condensing) |
| Construction |
| Enclosure |
Plastic housing with perforate metal grille, black |
| Mounting |
Freestanding or wall mount (bracket included) |
| Dimensions |
| Height |
4.18 in (106 mm) |
| Width |
40.60 in (1031 mm) |
| Depth |
2.78 in (71 mm);
2.96 in (76 mm) with wall mount bracket |
| Weight |
| 7.8 lb (3.6 kg) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.