Introduction
- The Device Database represents data for the general programming applications. The general programming applications are used by advanced programming applications such as D3Pro and SystemBuilder.
The following sections are available in the release notes:
General Notes and Issues
Minimum Application Versions:
- SIMPL Windows v4.02.15
- VTPro-e v3.8.2.7 or later
- Toolbox 1.08.083 or later
- iLux Designer 1.3.3 or later
- Engraver 4.00.001 or later
Minimum Firmware Version:
- 3-Series: 1.007.0019
- SIMPL Windows/ SIMPL+ and SIMPL# Library: 1.00.7.0019
- SIMPL# Pro and SIMPL# Pro Library: 1.009.0029
Fixes/Changes from 200.215.002 to 200.220.001:
MD5 Hash: d5c5b3326875478344fce6fb91bb787d
Library Update
- Updated
- DIN-1TSTAT8
- HD-MD4x1-4KZ-E/HD-MD4x2-4KZ-E/HD-MD4x4-4KZ-E/HD-MD8x4-4KZ-E/HD-MD8x8-4KZ-E
- INCLUDE4.DAT (3 & 4 series) version 2.19.016
- Update the DIN-1TSTAT8 SSP class to add the new Temp Offset joins
- Priority & Auto route on & off changes for HD-MD-NxM-4KZE
Help Update
- Updated help
- DM-TX-201-C2
- DM-TX-200-C2-2G
- DIN-1TSTAT8
- HD-MD4x1-4KZ-E/HD-MD4x2-4KZ-E/HD-MD4x4-4KZ-E/HD-MD8x4-4KZ-E/HD-MD8x8-4KZ-E
- On the HD-MD4x1-4KZ-E’s and the HD-MD4x2-4KZ-E’s top-level slot, the following digital joins have been deprecated in all firmware versions later than Firmware Version # v1.2.4671.00071
- <Priority_Route_On>
- <Priority_Route_On_Fb>
- <Priority_Route_Off>
- <Priority_Route_Off_Fb>
- On the HD-MD4x1-4KZ-E’s and the HD-MD4x2-4KZ-E’s HDMI Input slots (Slot-01-01 through Slot-01-04), the following analog joins have been deprecated in all firmware versions later than Firmware Version # v1.2.4671.00071
Fixes/Changes from 200.210.001 to 200.215.002:
MD5 Hash: b22a1af8b90bbb21ca280ac25e153b8c
Library Update
- Updated
- DM-TX-201-C2
- DM-TX-200-C2-2G
- INCLUDE4.DAT (3 & 4 series) version 2.19.015
- Updated S# socket operations for IPv6
- Updated SIMPL+ socket operations for IPv6
Help Update
- Updated help
- DM-TX-201-C2
- DM-TX-200-C2-2G
Fixes/Changes from 200.205.001 to 200.210.001:
MD5 Hash: b22a1af8b90bbb21ca280ac25e153b8c
Library Update
- Updated
- DIN-AP3(MEX)
- UC-ENGINE(-SD)
- UC-ENGINE-SD-Z
- CCS-UC-CODEC-xxx
Help Update
- Updated help
- UC-ENGINE(-SD)
- UC-ENGINE-SD-Z
- CCS-UC-CODEC-xxx
VTPro-e Help Update
Fixes/Changes from 200.201.001 to 200.205.001:
MD5 Hash: bd9e7fba26e89ff021b04605b133b50a
Library Update
- Updated
- DM-NVX-xxxx
- DM-NAX-4ZSP
- INCLUDE4.DAT (3 & 4 series) version 2.18.112
- SSP-1323 Protect Registration / Unregistration from being called by multiple threads
- SSP-1337 End of update request is not sent for ZUMNET-JBOX-DALI in CNET/LEGACY mode
Help Update
Toolbox
Fixes/Changes from 200.195.002 to 200.201.001:
MD5 Hash: 3299a2f4696dfba9db5808a42875e92b
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.18.108
- CSAPPS-4531 Unable to control Extron Matrix VIA SSH due to limitations of SSH client/interface
- SSP-1252 DM Lite endpoint updates
- SSP-1186 Add support for newly added DM-LITE Tx & Rx endpoints
Fixes/Changes from 200.190.002 to 200.195.002:
MD5 Hash: e7281b8ee82cda8c0a0fe6006c3238dd
Library Update
- New symbols
- HD-TX-4KZ-101
- HD-TX-4KZ-111
- HD-TXA-4KZ-101
- HD-TXC-4KZ-101
- HD-TXCA-4KZ-101
- HD-TX-4KZ-201
- HD-TX-4KZ-211 (-CHRG)
- HD-TX-4KZ-211-2G
- HD-TX-4KZ-401
- HD-TX-4KZ-421 (-CHRG)
- HD-RX-4KZ-101
- HD-RXA-4KZ-101
- HD-RXC-4KZ-101
- HD-RXCA-4KZ-101
- Updated
- UC-ENGINE-FLEX-TEAMS
- UC-ENGINE-FLEX-ZOOM
- INCLUDE4.DAT (3 & 4 series) version 2.18.107
- SSP-772 HD-TX-4KZ-211-2G: Create device class
- SSP-773 HD-TX-4KZ-421 (-CHRG): Create device class
- SSP-774 1HD-TX-4KZ-211 (-CHRG): Create device class
- SSP-953 HD-TX-4KZ-401: Create Device Class
- SSP-956 HD-TX-4KZ-201: Create device class
- SSP-1000 Create SSP classes for HDPS Dmlite HD-TX-4KZ-XXX transmitters.
- SSP-1301 UC-ENGINE-FLEX-TEAMS Release 1.9 Device class update
- SSP-1302 UC-ENGINE-FLEX-ZOOM Release 1.9 Device class update
Help Update
- New help
- HD-TX-4KZ-101
- HD-TX-4KZ-111
- HD-TXA-4KZ-101
- HD-TXC-4KZ-101
- HD-TXCA-4KZ-101
- HD-TX-4KZ-201
- HD-TX-4KZ-211 (-CHRG)
- HD-TX-4KZ-211-2G
- HD-TX-4KZ-401
- HD-TX-4KZ-421 (-CHRG)
- HD-RX-4KZ-101
- HD-RXA-4KZ-101
- HD-RXC-4KZ-101
- HD-RXCA-4KZ-101
- Updated help
- UC-ENGINE-FLEX-TEAMS
- UC-ENGINE-FLEX-ZOOM
VTPro-e
Fixes/Changes from 200.185.001 to 200.190.002:
MD5 Hash: 6403afe48ece0180d2ebd382a832ff98
Library Update
Help Update
Fixes/Changes from 200.180.001 to 200.185.001:
MD5 Hash: 470b85eb4296a20368824ceb11372fcc
Library Update
- New symbols
- ZUMNET-JBOX-DALI (GROUPS)
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.18.096
- SSP-673 ZW2 DALI Phase 2: Symbol update
- SSP-1294 ZUM Wired DALI Groups symbol update
- Fixed bugs:
- SSP-1288 4KZSCALER - Video Wall Mode Commands Not Working (4KSCALER Ok)
Help Update
- New help
- ZUMNET-JBOX-DALI (GROUPS)
Fixes/Changes from 200.175.001 to 200.180.001:
MD5 Hash: 5f3b4310152e1ef786191e4dedb1efca
Library Update
- Updated
- DM-NVX-D10-D20 COM
- DM-NVX-E10-E20 COM
- DM-NVX-D200 COM
Help Update
- Updated
- Fix for issue with hyperlinks in Software License Agreement
Fixes/Changes from 200.170.001 to 200.175.001:
MD5 Hash: 5ee058316d43940e691fa8698cfced14
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.18.085
- Fixed bugs:
- CSAPPS-4477: Large SIMPL program failed to start resulting in it getting stuck in "Starting" and no other rooms can start
Help Update
- Updated
- Fix for issue with hyperlinks in Software License Agreement
Fixes/Changes from 200.165.003 to 200.170.001:
MD5 Hash: 35ff6bc347dc7573256b7da28015899f
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.18.082
- SSP-1290 DM-NVX Rel 7: Missing new resolutions in resolutions enum
- SSP-1281 DM-NVX-E760x: FW Rel 7 device class update
- SSP-1280 DM-NVX-E30x: FW Rel 7 device class update
- SSP-1279 DM-NVX-E36x: FW Rel 7 device class update
- SSP-1278 DM-NVX-352x: FW Rel 7 device class update
- SSP-1277 DM-NVX-35x: FW Rel 7 device class update
- SSP-1273 Bug report - 6798 - SIMPL# - SSP DM.Streaming.DmNvx363 - Exception w/ Include4.dat 2.18.56 (DevDB 200.150.002)
- SSP-1268 Update DM-NVX-36x(C), DM-NVX-D80-IoAV and DM-NVX-760(C) device classes as per the latest SIMPL Windows Symbol
- SSP-1275 Bug report - 6671 - SIMPL# - Crestron.SimplSharp.Scheduler - Not Retrieving Events When ProgramIDTag has '.' Character
- SSP-1254 Update DM-NVX-35x and DM-NVX-E30X device classes as per the latest SIMPL Windows Symbol
- SSP-1250 Bug report - 6596 - SIMPL# - SQLite Database Connection Issues - System.ArgumentException: Invalid ConnectionString format for part "Version", no equal sign found"
Help Update
- Updated
- Software License Agreement
Fixes/Changes from 200.160.001 to 200.165.003:
MD5 Hash: 2e385890773f7c48a4247e3c47758a85
Library Update
- New symbols
- Ethernet-Only 4-Series control system
- Updated
- DM-NVX-35x/DM-NVX-35xC
- DM-NVX-352/DM-NVX-352C
- DM-NVX-36x/DM-NVX-36xC
- DM-NVX-E30/DM-NVX-E30C
- DM-NVX-E760/DM-NVX-E760C
Help Update
- New help
- Ethernet-Only 4-Series control system
- Updated
- DM-NVX-35x/DM-NVX-35xC
- DM-NVX-352/DM-NVX-352C
- DM-NVX-36x/DM-NVX-36xC
- DM-NVX-E30/DM-NVX-E30C
- DM-NVX-E760/DM-NVX-E760C
- Exclusive OR
- Exclusive NOR
- Serial Multiplexor
Fixes/Changes from 200.155.002 to 200.160.001:
MD5 Hash: 5ccfab80fca5dc969c8072d894173e7f
Engraver
Fixes/Changes from 200.150.002 to 200.155.002:
MD5 Hash: 9532500b682a30f553309c5a3fa597c4
Library Update
- Updated
- CEN(I)-GW1 device model has been updated to ensure it cannot be added to MC3 to TPCS control systems
- INCLUDE4.DAT (3 & 4 series) version 2.18.065
- SSP-642 ZW Phase 2 - Sensors: Create device class
- SSP-1140 Update new joins for ZUMLinkOccVacSensorDevices
- Fixed Bugs:
- SSP-1264 Documentation wrong for class ZumLinkOccupancySensor
- SSP-1249 Bug report - 6579 - SIMPL# - ScaleWithLimits - Exception When Lower Bound is Negative But Its Absolute Value > Upper Bound
- SSP-1241 Bug report - 6485 - SIMPL# - MPC3-201 - Volume up and down names are reversed
- SSP-1141 Correct the "NA-ShipWithProgram 98.40.00.12" field label on the detail device detail page to be "AVF Ship With Program""
Fixes/Changes from 200.145.001 to 200.150.002:
MD5 Hash: efa557830b8cc501fdadf48f7520d606
Library Update
- New symbols
- ZUMLINK-DT-QUATTRO-DLS
- ZUMLINK-DT-QUATTRO-DLS-RLY
- ZUMLINK-IR-QUATTRO-DLS
- ZUMLINK-IR-QUATTRO-DLS-RLY
- ZUMLINK-IR-QUATTRO-HD-DLS
- ZUMLINK-IR-QUATTRO-HD-DLS-RLY
- ZUMLINK-US-HALLWAY-DLS
- ZUMLINK-US-HALLWAY-DLS-RLY
- ZUMLINK-US-ONEWAY-DLS
- ZUMLINK-US-ONEWAY-DLS-RLY
- ZUMLINK-US-QUATTRO-DLS
- ZUMLINK-US-QUATTRO-DLS-RLY
- Updated
- UC-ENGINE-FLEX-TEAMS
- UC-ENGINE-FLEX-ZOOM
- INCLUDE4.DAT (3 & 4 series) version 2.18.056
- SSP-642 ZW Phase 2 - Sensors: Create device class
- SSP-1140 Update new joins for ZUMLinkOccVacSensorDevices
- Fixed Bugs:
- SSP-1259 include4.dat release candidate does not contain all changes for zum wired devices
- SSP-1262 Raw occupancy is not reporting reliably with production hardware
Help Update
- New help
- ZUMLINK-DT-QUATTRO-DLS
- ZUMLINK-DT-QUATTRO-DLS-RLY
- ZUMLINK-IR-QUATTRO-DLS
- ZUMLINK-IR-QUATTRO-DLS-RLY
- ZUMLINK-IR-QUATTRO-HD-DLS
- ZUMLINK-IR-QUATTRO-HD-DLS-RLY
- ZUMLINK-US-HALLWAY-DLS
- ZUMLINK-US-HALLWAY-DLS-RLY
- ZUMLINK-US-ONEWAY-DLS
- ZUMLINK-US-ONEWAY-DLS-RLY
- ZUMLINK-US-QUATTRO-DLS
- ZUMLINK-US-QUATTRO-DLS-RLY
Toolbox
- New data
- ZUMLINK-DT-QUATTRO-DLS
- ZUMLINK-DT-QUATTRO-DLS-RLY
- ZUMLINK-IR-QUATTRO-DLS
- ZUMLINK-IR-QUATTRO-DLS-RLY
- ZUMLINK-IR-QUATTRO-HD-DLS
- ZUMLINK-IR-QUATTRO-HD-DLS-RLY
- ZUMLINK-US-HALLWAY-DLS
- ZUMLINK-US-HALLWAY-DLS-RLY
- ZUMLINK-US-ONEWAY-DLS
- ZUMLINK-US-ONEWAY-DLS-RLY
- ZUMLINK-US-QUATTRO-DLS
- ZUMLINK-US-QUATTRO-DLS-RLY
Fixes/Changes from 200.140.001 to 200.145.001:
MD5 Hash: 15afd25407a59bfa6f49c306bd3c8598
Library Update
- New symbols
- DM-NAX-4ZSP
- Eutech Prolight V2
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.18.037
- SSP-1051 DM-NAX-4ZSP 4 Zone PreAmp Unit: Create device class
- Fixed Bugs:
- SSP-1094 4-Series / C# Program - VS2019 NuGetPackages Causing CPZ Files To Show Same "Date Modified"
- SSP-1240 Unable to assign value from SimplSharpString array in Simpl+ to a String_Output
- SSP-1242 DIN-DALI-2 Ballast LevelFeedback in SIMPL# Pro not working
Help Update
- New help
- DM-NAX-4ZSP
- Eutech Prolight V2
Toolbox
- New data
- DM-NAX-4ZSP
- Eutech Prolight V2
Fixes/Changes from 200.135.001 to 200.140.001:
MD5 Hash: fe4c60eba1fb1c971b3a3567ba805dc8
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.18.015
- SSP-669: DM-NVX-D200: Create device class
- SSP-1108: Add DM-NVX-D200 device class
- Fixed Bugs:
- SSP-1233: SSP TCPServer no longer accepts connections when Max connections reached even if all connections are closed
- SSP-1193: [ETF-6400] 4-Series - SIMPL# Secure TCP Server will close and become unreachable
- SSP-1145: DM-NVX-D200: Class is missing in latest Include4
- SSP-1136: DM-NVX-D200: SSP methods/events not working for Disable Video Timeout
- SSP-1135: DM-NVX-D200: Cannot Set Fan Control and Fan Status does not update
Help Update
Toolbox
Fixes/Changes from 200.130.003 to 200.135.001:
MD5 Hash: fe4c60eba1fb1c971b3a3567ba805dc8
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.18.002
- SSP-407 Resi Cloud-Connected PDU: Create device class
Help Update
Toolbox
Fixes/Changes from 200.125.001 to 200.130.003:
MD5 Hash: 13c7b74eb04056d1546c77d302989e0e
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.17.080
- SSP-1160 Update SG Shades for new Slot changes
- SSP-1162 Update the CSM-QMTDC-163-1-SG class to not send the LO for certain joins (OPEN/CLOSE/STOP)
Help Update
Toolbox
- New data
- HD-PS621
- HD-PS622
- CSM-QMTDC-163-1-SG
Engraver
Fixes/Changes from 200.120.003 to 200.125.001:
MD5 Hash: d759c2d898bd9d800fef6dd4bedeb821
Library Update
- Updated
- DM-NAX-8ZSA
- DM-NAX-16AIN
- CSM-QMTDC-163-1-SG
- TSx-xx70
- INCLUDE4.DAT (3 & 4 series) version 2.17.079
- SSP-1022 MR White Label: Create device class
Help Update
- Updated help
- CSM-QMTDC-163-1-SG
- TSx-xx70
VTPro-e
Fixes/Changes from 200.115.005 to 200.120.003:
MD5 Hash: a0226f8f4c1252f85212e69a4a9c0342
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.17.073
- SSP-458: ZW Phase 2 - ZUM-HUB4: Create device class
- SSP-1144: 6275- The DmNvxE30 class does not populate it’s HdmiIn collection when instantiated as an endpoint on a Director
Help Update
Toolbox
- New data
- HD-PS401
- HD-PS402
- ZUM-HUB4
Fixes/Changes from 200.110.002 to 200.115.005:
MD5 Hash: 9f2080ddff36a7ed76953e25fccb7912
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.17.069
- SSP-1119: GLS-LCCT SolarSyn: Create device class
Fixes/Changes from 200.105.001 to 200.110.002:
MD5 Hash: 37b11cce9fc48fc52fa452829d06082e
Library Update
- Updated
- Update to DM-NAX-8ZSA
- Fix for UC-ENGINE-FLEX-TEAMS SG's presses are not making their way to the control system
- INCLUDE4.DAT (3 & 4 series) version 2.17.039
- SSP-115: DM-NAX-16AIN requires Simpl# Pro Support
Help Update
Fixes/Changes from 200.100.004 to 200.105.001:
MD5 Hash: 37b11cce9fc48fc52fa452829d06082e
Library Update
Help Update
Toolbox
Fixes/Changes from 200.95.001 to 200.100.004:
MD5 Hash: 37b11cce9fc48fc52fa452829d06082e
Library Update
- New symbols
- Basalte Fibonacci keypad
- DM-NVX-D10-D20
- DM-NVX-E10-E20
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.17.036
- SSP-671 Low Cost DM-NVX-E20 -D20: Create device class
- SSP-672 Low Cost DM-NVX-E10 -D10: Create device class
- SSP-970 Create device classes for DM-NVX-E10 and DM-NVX-E20
- SSP-971 Create device classes for DM-NVX-D10 and DM-NVX-D20
- SSP-997 DM-NVX-E10-E20: Device class update
- SSP-1001 DM-NVX-D10-D20: Device class update
- SSP-1063 NVX D10/D20/E10/E20 support for 1 IR port not 2
- SSP-1104: SIMPLSharp Pro EISC Server encodes strings wrongly
- SSP-1105: D20: enum: eAudioSource
- SSP-1106: D20: NAX: enum: eStreamStatus: there is mismatch from joins sheet to simpl#
- SSP-1112: DM-NVX-E10/E20: Control properties AudioSource and AudioSourceFeedback accepting unsupported eAudioSource enum values
- SSP-1113: DM-NVX-E10/E20: Duplicate ordinal values define for 2 different event ID's raised by SourceTransmit.StreamChange
Help Update
- New help
- Basalte Sentido keypad
- Basalte Fibonacci keypad
- DM-NVX-D10-D20
- DM-NVX-E10-E20
Toolbox
- New data
- Basalte Sentido keypad
- Basalte Fibonacci keypad
- DM-NVX-D10-D20
- DM-NVX-E10-E20
Fixes/Changes from 200.90.002 to 200.95.001:
MD5 Hash: fe6049a7b8a0b2f5c4fc8385cf8ab146
Library Update
- New symbols
- AM-3100-WF(I)
- AM-3200/AM-3200-WF(I)
- HD-PS621/HD-PS622
- HDBT Receiver/HDBT Transmitter
- HD-RX-101-C-1G
- HD-RXC-101-C-1G
- HD-TXC-101-C-1G-E
- HD-TX-201-C-2G-E
- HD-TX-301-C-E
- HDI-TX-301-C-2G-E
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.14.182
- SSP-652 Create Device Class for HD-PSXXX devices
- SSP-704 Release HD-PSXXX Simpl# Pro Class
- SSP-913 HD-PS622 and 621: Create device class
- SSP-917 To make the DM Lite Transmitter/Receiver SSP classes usable with HD-PS switchers
- SSP-936 HDBT Transmitter: Create device class
- SSP-937 HDBT Receiver: Create device class
- SSP-938 HDI-TX-301-C-2G-E: Create device class
- SSP-939 HD-RX-101-C-1G: Create device class
- SSP-940 HD-RXC-101-C-1G: Create device class
- SSP-941 HD-TX-201-C-2G-E: Create device class
- SSP-942 HD-TX-301-C-E: Create device class
- SSP-943 HD-TXC-101-C-1G-E: Create device class
- SSP-947 UC-ENGINE-FLEX-TEAMS: Create device class
- SSP-948 UC-ENGINE-FLEX-ZOOM: Create device class
Help Update
- New help
- AM-3100-WF(I)
- AM-3200/AM-3200-WF(I)
- HD-PS621/HD-PS622
- HDBT Receiver/HDBT Transmitter
- HD-RX-101-C-1G
- HD-RXC-101-C-1G
- HD-TXC-101-C-1G-E
- HD-TX-201-C-2G-E
- HD-TX-301-C-E
- HDI-TX-301-C-2G-E
Toolbox
- New data
- AM-3100-WF(I)
- AM-3200/AM-3200-WF(I)
- HD-PS621/HD-PS622
Fixes/Changes from 200.85.002 to 200.90.002:
MD5 Hash: fe6049a7b8a0b2f5c4fc8385cf8ab146
Library Update
- New symbols
- CEN-GW1
- CSM-QMTDC-163-1-SG
- Updated
- DM-NVX-35x(C)
- DM-NVX-352(C)
- DM-NVX-36x(C)
- DM-NVX-D30(C)
- DM-NVX-D80-IoAV
- DM-NVX-E30(C)
- DM-NVX-E760
- HZ-THSTAT
- INCLUDE4.DAT (3 & 4 series) version 2.14.171
- SSP-973: DM-NVX-352: FW Rel 6 device class update
- SSP-974: DM-NVX-35x: FW Rel 6 device class update
- SSP-975: DM-NVX-36x: FW Rel 6 device class update
- SSP-976: DM-NVX-D30: FW Rel 6 device class update
- SSP-977: DM-NVX-D80: FW Rel 6 device class update
- SSP-978: DM-NVX-E30(C): FW Rel 6 device class update
- SSP-979: DM-NVX-E760: FW Rel 6 device class update
- SSP-990: DM-NVX-E30: FW Rel 6 device class update
- SSP-991: DM-NVX-352(C): FW Rel 6 device class update
- SSP-992: DM-NVX-35x(C): FW Rel 6 device class update
- SSP-993: DM-NVX-D30(C): FW Rel 6 device class update
- SSP-994: DM-NVX-36x(C): FW Rel 6 device class update
- SSP-587: Battery Shade Gateway: Create device class
- SSP-586: Battery Shades: Create device class
- SSP-1033: DM-NVX-E30(C)/E760(C): SSP events / property get-sets not working for Test Pattern Generator feature
- SSP-1031: Unable to instantiate NVX-E760 with IPID
- SSP-1030: DM-NVX-E30(C): SSP libraries not supporting stream type properties and events
Help Update
- New help
- CEN-GW1
- CSM-QMTDC-163-1-SG
- Updated help
- DM-NVX-35x(C)
- DM-NVX-352(C)
- DM-NVX-36x(C)
- DM-NVX-D30(C)
- DM-NVX-D80-IoAV
- DM-NVX-E30(C)
- DM-NVX-E760
- HZ-THSTAT
Toolbox
- New data
- CEN-GW1
- CSM-QMTDC-163-1-SG
Fixes/Changes from 200.80.001 to 200.85.002:
MD5 Hash: 0052bbb8a07938ab79ea891269f0043b
Library Update
- Updated
- Fix for HZ-THSTAT modules to autofill signals when added to a SIMPL program
Toolbox
Fixes/Changes from 200.75.001 to 200.80.001:
MD5 Hash: 8d7acfd39e99c95925b8c8355ddb84f3
Library Update
- New symbols
- DM-NAX-8ZSA
- UC-ENGINE-FLEX-TEAMS
- UC-ENGINE-FLEX-ZOOM
- Updated
- Fix for Duplicate Device Programming for Crestron One
- Added attribute to Crestron One to trigger the control system to request reserve join queries
- INCLUDE4.DAT (3 & 4 series) version 2.14.160
- SSP-316 DM-NAX-8ZSA: Create device class
- SSP-726 DM-NAX-8ZSA latest updates to be supported on SSP
- SSP-755 DM-NAX-8ZSA updates as per 8ZA Device_Definition SVN check in
- SSP-767 Update DM-NAX-8ZSA to support 40 chimes
- SSP-799 Expose TrackSec_F join on DM-NAX-8ZSA
- SSP-800 Expose Rating_F join on DM-NAX-8ZSA
- SSP-868 Add Stream_About_To_Finish_F to the Player Transport slot of the 8ZSA model
- SSP-885 Add Preset Joins to the 8ZSA model
- SSP-907 Updates to the 8ZSA model
Help Update
- New SIMPL help
- DM-NAX-8ZSA
- UC-ENGINE-FLEX-TEAMS
- UC-ENGINE-FLEX-ZOOM
VTPro-e
Fixes/Changes from 200.70.003 to 200.75.001:
MD5 Hash: 8bcc50bb989aea582e701522486b5954
Library Update
- Updated
- Fix for DIN-2LEDPWM8 PWM Frequency Parameter
- INCLUDE4.DAT (3 & 4 series) version 2.14.157
- SSP-201 Horizon Thermostat - Create device class for HZ-THSTAT
- SSP-847 Horizon Thermostat Tio files updated to RelVrs=1.005.
- SSP-852 HZ-THSTAT Circulate mode Low and Medium set/fb are incorrect
- SSP-855 SSP RunSchedule setting enum values incorrect for HZ-THSTAT
- SSP-870 Executing "HzThatstat.ReadSetupData" throws NullSig exception.
- SSP-961 Crestron One reserve join mismatch
Help Update
- Updated help
- Fix for F1 issue for the "Enhanced Embedded Video" object
- DM-XIO-DIR-XXX - updated information for endpoints
- Added notice for Horizon Wireless Keypads/Dimmers on MC3 internal RF gateway
- Updated Apple HomeKit / TSR-310 - <Enable> documentation
- Updated help for MPC3-XXX AutoBrightnessEnable
Fixes/Changes from 200.65.001 to 200.70.002:
MD5 Hash: 8bcc50bb989aea582e701522486b5954
Library Update
- New symbols
- Crestron One
- DM-NVX Director Release 2A
- Updated
- Added DM-NVX-36x/E76 to Device Connection Logic pane in SIMPL
- Fix for compilation issue for 2-series control systems
- INCLUDE4.DAT (3 & 4 series) version 2.14.155
- SSP-423 DM-NVX Director Release 2 Group 2A changes
- SSP-897 Crestron One: Create device class
Help Update
- New help
- Crestron One
- DM-NVX Director Release 2A
- Updated help
- Update to "About Configuration Manager" topic
Toolbox
- Updated
- Fixed issue for downgrading PUF for POE OCC Sensor
Fixes/Changes from 200.60.001 to 200.65.001:
MD5 Hash: 2e8424e23e7557b75fe1f52a10a35fba
Library Update
- Updated
- Renamed ZUMNET-JBOX-DALI (LEGACY) to ZUMNET-JBOX-DALI (CUSTOM)
- INCLUDE4.DAT (3 & 4 series) version 2.14.154
- SSP-706 JsonDB Unsubscribe called from inside Callback handler causes crash
- SSP-833 Discrepancy 3-Series vs 4-Series: SQLite ConnectionString doesn't work with "\"
Help Update
- Updated help
- Update to HDMD200/300/400 Kits
- DM-NVX-363 (Audio Delay signal)
- Add Module Update
- Smart GRaphics Upgrade topic
- Import of DSP Symbol Exports from Avia
Fixes/Changes from 200.55.001 to 200.60.001:
MD5 Hash: 2e8424e23e7557b75fe1f52a10a35fba
Library Update
- Updated
- DM-NVX-xxxx - DM-NVX-352(C), DM-NVX-35x(C), DM-NVX-D30(C), DM-NVX-D80-IoAV, DM-NVX-E30(C) and the corresponding XIO Endpoints were added to Device Connection Logic pane in SIMPL
- INCLUDE4.DAT (3 & 4 series) version 2.14.147
- SSP-853: HD-RX series updates
- SSP-822: HD-WP-4K-401 FW Update: Create device class
- SSP-803: HD-MDNxM Changes - Update SSP Support
- SSP-696: Store application number in a way that can not be modified via reflection
Help Update
- Updated help
- DM-NVX-xxxx Preview Image
Engraver
- ZUMLINK-KP-R-W data update
Fixes/Changes from 200.50.001 to 200.55.001:
MD5 Hash: 2e8424e23e7557b75fe1f52a10a35fba
Library Update
- New symbols
- ZUMLINK-JBOX-20A-PLUG
- ZUMLINK-JBOX-20A-SW
- ZUMLINK-JBOX-16A-LV
- ZUMLINK-KP-R-W
- ZUMNET-BRIDGE
- ZUMNET-JBOX-16A-LV
- ZUMNET-JBOX-DALI
- Updated
- HD-WP-4K-401
- INCLUDE4.DAT (3 & 4 series) version 2.14.143
- SSP-538: ZUMLINK-JBOX-20A-PLUG: Create device class
- SSP-539: ZUMLINK-JBOX-20A-SW: Create device class
- SSP-541: ZUMLINK-KP-R-W: Create device class
- SSP-543: ZUMNET-JBOX-DALI: Create device class
Help Update
- New help
- ZUMLINK-JBOX-20A-SW
- ZUMLINK-JBOX-16A-LV
- ZUMLINK-KP-R-W
- ZUMNET-JBOX-16A-LV
- ZUMNET-JBOX-DALI
Toolbox
- ZUMLINK-JBOX-20A-PLUG
- ZUMLINK-JBOX-20A-SW
- ZUMLINK-JBOX-16A-LV
- ZUMLINK-KP-R-W
- ZUMNET-JBOX-16A-LV
- ZUMNET-JBOX-DALI
Engraver
Fixes/Changes from 200.45.003 to 200.50.001:
MD5 Hash: 2e8424e23e7557b75fe1f52a10a35fba
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.14.142
- SSP-848 Wrong event and event id mentioned in xml comments for DmInputTypeFeedback property.
- SSP-843 DGE-100 "1920x1200@60 RB" at index 33 to be removed from the resolution list
- SSP-838 Zum Wired - ZumNetBridgeRoom Device Should Allow Setting16 Bit IPIDs
- SSP-836 CLONE - "XPanel 3.0 Crestron HTML5" symbol - sliders are not smooth
- SSP-802 DM-NVX 35X, 36X, E and D series device updates from Aug 25 to till date.
- SSP-801 (Secure)TCPServer ClientConnected method logging error when disconnected
- SSP-785 Missing check for the memory stream buffer overflow when large Fusion RVI file is to be generated
- SSP-757 ONVIF PTZ Camera - Documented Speed Properties Don't Exist In Namespace
- SSP-719 HttpsClient.DispatchAsync() returns Invalid Response Code for Put Method.
- SSP-690 HD-MD421: Create device class
- SSP-689 HD-MD402: Create device class
Help Update
Fixes/Changes from 200.40.004 to 200.45.003:
MD5 Hash: 2e8424e23e7557b75fe1f52a10a35fba
Library Update
- Updated
- Disabled 4-series support for Crestron Mobile
Help Update
- Updated help
- Multiple Logic Wave Pulse symbol
- DM-NVX-35x(C)
Toolbox
VTPro-e
Fixes/Changes from 200.35.003 to 200.40.004:
MD5 Hash: 2e8424e23e7557b75fe1f52a10a35fba
Library Update
- Updated
- DM-NVX-35x(C)
- DM-NVX-36x(C)
- DM-NVX-D30(C)
- DM-NVX-E30(C)
- HD-RX-4K-210-C-E
- HD-RX-4K-410-C-E(SW4)
- HD-RX-4K-510-C-E(SW4)
- TSW-x50 System 3 Reserved Joins
- Endpoints for DM-XIO-DIR
- XPanel 3.0 Crestron HTML5
- INCLUDE4.DAT (3 & 4 series) version 2.14.134
- SSP-383: Eutech Keypads: Create device class Fixed Bugs:
- SSP-837: Zum Wired - FullOff Join For Units Not Working
- SSP-779: [x70]: Panels such as 570 do not have the functionality for SystemRoomName, but there is no comment in the class which specifies supported/non supported panel types
Help Update
- Updated help
- DM-NVX-35x(C)
- DM-NVX-36x(C)
- DM-NVX-D30(C)
- DM-NVX-E30(C)
Toolbox
- UC-PR Mercury Presentation Box
Fixes/Changes from 200.30.002 to 200.35.003:
MD5 Hash: 0468556b0e82b02bfa2b60f129367a86
Library Update
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.14.131
- SSP-702: HTML5 Web XPanel: Create device class Fixed Bugs:
- SSP-788: AudioFollowsOutputSelectFeedback is not received for Aux2 on HD-MDNXM-4KZ-E devices
- SSP-789: Cannot set all available outputs to Aux audio when audio follows video is selected on HD-MDNXM devices
Help Update
- Updated help
- Updated licensing text in help files
Fixes/Changes from 200.25.003 to 200.30.001:
MD5 Hash: c1680a52d2b63f9edec65752ede0cc55
Library Update
- Updated
- DM-RMC-4KZ-SCALER-C - added 4-Series support
- HR-310 - updated help ID
- INCLUDE4.DAT (3 & 4 series) version 2.14.128
- SSP-156: DM-NVX-E760: Create device class
- SSP-736: Govt versions of TSW panels: Create device class
- SSP-747: Zum Kaiser symbol Update Fixed Bugs:
- SSP-790: [4series] SIMPL#: CrestronZIP.Unzip error
- SSP-782: X70 GV Proximity Sensor active feedback join is not visible in SSP device class..
- SSP-776: RVI File Creation is causing Watch Dog/Restart Issues in AVF
- SSP-739: System Monitor needs to throw proper exceptions on VC-4
Help Update
- Updated help
- Updated help for valid signal names
- Created new help ID for HR-310
Toolbox
- DM-NVX-E760
- CH-70 Series Touchscreens
Fixes/Changes from 200.20.002 to 200.25.003:
MD5 Hash: c1680a52d2b63f9edec65752ede0cc55
Library Update
- New symbols
- TS-770-GV
- TS-1070-GV
- TSW-770-GV
- TSW-1070-GV
- Updated
- DM-RMC-4KZ-SCALER-C - added 4-Series support
- TSx-xx70 - added symbol compatibility support
- INCLUDE4.DAT (3 & 4 series) version 2.14.120
- SSP-752: ZUMNET-BRIDGE and ZUMNET-BRIDGE-ROOM Updates
- SSP-751: Request for TIO minor update on zum-wired jbox link/net
- SSP-750: X70 SSP update for X70 Proximity Sensor Active join
- SSP-748: Add Control system compatibility property to Crestron Environment
- SSP-542: ZUMNET-JBOX-16A-LV: Create device class
- SSP-540: ZUMLINK-JBOX-16A-LV: Create device class
- SSP-469: Basalte Deseo Keypad: Create device class
- SSP-177: DM-NVX integration of NAX: Upgrade device classes for SSP Fixed Bugs:
- SSP-791: include4.dat 2.14.099 - Sonos S2 12.1 Update & Loss of Control
- SSP-753: DM NVX Secondary Audio no longer initialized.
- SSP-744: Update the Design for ZUMLINK-JBOX-DALI to be similar with the ZUMLINK-JBOX-16A-LV
- SSP-743: PCM Audio shows up as L24 audio
- SSP-741: Simpl Sharp is not sending the correct value of "DM NAX (AES67) audio" for AudioSource, DanteAudioSource join of NVX
- SSP-738: CrestronLabs: Program Load "stuck"
- SSP-713: Close or prevent usage of device msg queue when registration failure is received
- SSP-682: ZUMNET-JBOX-16A-LV Symbol: InManualOverride_FB join does not produce expected digital value
- SSP-646: 4-Series / C# Program - Errors & Warnings Re: ProgramInfo.config file
- SSP-627: Need to initialize System.Environment.CurrentDirectory on start of SIMPL+/SIMPL# Pro
- SSP-428: Enhance TimeZone support in SIMPL#
Help Update
- New help
- TS-770-GV
- TS-1070-GV
- TSW-770-GV
- TSW-1070-GV
Toolbox
- TS-770-GV
- TS-1070-GV
- TSW-770-GV
- TSW-1070-GV
VTPro
- New data
- TS-770-GV
- TS-1070-GV
- TSW-770-GV
- TSW-1070-GV
Fixes/Changes from 200.15.001 to 200.20.002:
MD5 Hash: c1680a52d2b63f9edec65752ede0cc55
Library Update
- New symbols
- DIN-AP4
- HD-MD8X8-4KZ-E
- HD-MD8X4-4KZ-E
- HD-MD4X4-4KZ-E
- HD-MD4X2-4KZ-E
- HD-MD4X1-4KZ-E
- TS-770
- TSW-570
- TSW-570P
- TSW-770
- TSW-1070
- Updated
- TS-1070 - update to System3 Reserved Joins
- INCLUDE4.DAT (3 & 4 series) version 2.14.099
- SSP-573: TS-1070: Create device class
- SSP-574: TS-770: Create device class
- SSP-685: Add SystemRoomName reserved join for x60/x70 panels
- SSP-668: Kaiser Permanente Zum FW Update: Create device class
- SSP-445: Add Simpl# Pro Class support for HD-MDNxM-4KZ-E 4K60 4:4:4 HDMI Switchers
- SSP-734: CLONE - Josh.ai - Reported SIMPL Module Fails To Establish on 4-Series (MC4)
- SSP-730: HD-MD-4KZ volume and mute events do not contain the correct index number
- SSP-728: ZUMNET-JBOX SSP Symbols are not functional
- SSP-718: HD-MDNXM: Output HDCP state feedback is not correct with SIMPL# Pro
- SSP-712: HD-MDNXM-4KZ-E: Output sink capability fb is incorrect with SIMPL# Pro
- SSP-679: 15 near simultaneous TCPClient connections to a single TCPServer can cause the connection to be established, but the TCPServer code to not report the connection
Help Update
- New help
- DIN-AP4
- HD-MD8X8-4KZ-E
- HD-MD8X4-4KZ-E
- HD-MD4X4-4KZ-E
- HD-MD4X2-4KZ-E
- HD-MD4X1-4KZ-E
- TS-770
- TSW-570
- TSW-570P
- TSW-770
- TSW-1070
- Updated help
- TS-1070 - update to System3 Reserved Joins
Toolbox
- DIN-AP4
- HD-MD8X8-4KZ-E
- HD-MD8X4-4KZ-E
- HD-MD4X4-4KZ-E
- HD-MD4X2-4KZ-E
- HD-MD4X1-4KZ-E
- TS-770
- TSS-770
- TSS-1070
- TSW-570/TSW-570P
- TSW-770
- TSW-1070
VTPro
- New data
- TS-770
- TSW-570
- TSW-570P
- TSW-770
- TSW-1070
- Updated
- TS-1070 - update to reserved joins
Fixes/Changes from 200.10.001 to 200.15.001:
MD5 Hash: c1680a52d2b63f9edec65752ede0cc55
Library Update
- Updated
- TSW-xx60 - update to System3 Reserved Joins
- INCLUDE4.DAT (3 & 4 series) version 2.14.093
- SSP-705: DM NVX SIMPL# library update for Thumbnail (preview images) support in 36x
- SSP-697: AM-200/300 Release 5.1 Symbol Updates
- SSP-675: Rel 5 for NVX 35x 36X E30 D30: Create device class
- SSP-674: Rel 4 DM-NVX-36x: Create device class
- SSP-724: S# Pro programs built with NuGet package fail to start with Missing Files error
- SSP-608: [4-Series] Exception thrown on user console command removal
Help Update
- Updated help
- TSW-xx60 - update to System3 Reserved Joins
Toolbox
Fixes/Changes from 200.05.001 to 200.10.001:
MD5 Hash: c1680a52d2b63f9edec65752ede0cc55
Library Update
- New symbols
- Crestron Connected Displays
Help Update
- New help
- Crestron Connected Displays
Fixes/Changes from 200.01.001 to 200.05.001:
MD5 Hash: c1680a52d2b63f9edec65752ede0cc55
Library Update
- New symbols
- TS-1070
- RMC4
- Crestron Go app and tablet
- HZ-KPCN
- Updated
- CHV-TSTAT-FCU - Help documentation update
- INCLUDE4.DAT (3 & 4 series) version 2.14.078
- SSP-701: Crestron Go app and tablet: Create device class
- SSP-715: CrestronGo missing mute function from VOIP extender
- SSP-714: CrestronGo device missing Touch Detection extender
Toolbox
VTPro-e
Fixes/Changes from 200.00.015 to 200.01.001:
MD5 Hash: 8f948593e56d8a4224654f2a8cb2533c
Library Update
- New symbols
- EISC Client
- EISC Server
- VC-EISC Client
- Updated
- HD-TX-201-C-2G-E - added documentation
- HD-TX-101-C-E - added documentation
- HD-TXC-101-C-E - added documentation
- HD-TXC-101-C-1G-E - added documentation
- HD-TX-301-C-E - added documentation
- HDI-TX-301-C-2G-E - added documentation
Fixes/Changes from 115.08.002 to 200.00.015:
MD5 Hash: e2051a3d0d1ab18136220cb698411d8c
NOTE: This version of the device database includes an updated Newtonsoft (new version is 4.0.8.0) that is incompatible with the previous version. To avoid any problems, you will have to recompile any SIMPL# libraries that reference Newtonsoft with this version of the device database At the same time, any SIMPL# libraries compiled with this version of the device database that depend on Newtonsoft, will only work in SIMPL Windows programs that are compiled against the new version of the device database as well. You will need to upgrade to Crestron Database 200+ and Device Database 200+ to avoid compatibility issues. When there is a mismatch, you will get the following compilation error in SIMPL Windows / SIMPL+: “ERROR (LGCMCVT149) File: ** C:.usp, Line 14\ mySSharp.dll cannot be used due to a dependency on Newtonsoft.Json.Compact, version 3.5.0.0. Press Help for details.” , preventing compilation to finish. Since compilation catches the mismatch, there is no runtime impact of this change.
Library Update
- New symbols
- CLW-DIMUEX-P-W-S-T
- HD-RX-4K-210-C-E
- HD-RX-4K-210-C-E-POE
- HD-TX-301-C-E
- HD-TX-101-C-1G
- HD-TX-201-C-2G
- HD-TX-301-C-2G
- HD-TXC-101-C-1G
- Updated
- INCLUDE4.DAT (3 & 4 series) version 2.14.0053
- Added DeviceSecureBlob Simpl::Pro wrapper
- Cleaned up TextWriter class
- Update Ethernet Cresnet bridge for new fake update join for CSA-PWS10S-HUB-ENET device.
- Added the missing HD-TX classes (HD-TX-101-C-E and HD-TXC-101-C-E) to SSP class library.
- Add Widget Functionality for CrestronApp
- SSP-603: Update Ethernet Cresnet bridge for new fake update join
- Removed DeviceSecureBlob
Toolbox
- HD-RX-4K-210-C-E
- HD-RX-4K-210-C-E-POE
- CLW-DIMUEX-P-W-S-T
Engraver
Fixes/Changes from 115.07.001 to 115.08.002:
MD5 Hash: d43b8f04c6347ad5527c25c3ebc38041
Library Update
- Updated
- fixed issue with COM port not sending feedback to Control System for the following:
- NVX-350
- NVX-351
- NVX-352
- NVX-E30
- NVX-D30
- DN-NVX-D80-IOAV
- DM NAX (AES67)
- DM-XIO-Routing
Fixes/Changes from 115.06.003 to 115.07.001:
MD5 Hash: c918ce193374c981416ee1ddabdbc796
Library Update
- Updated
- CHV-TSTAT-FCU - added D3Pro support.
Fixes/Changes from 115.05.002 to 115.06.003:
MD5 Hash: 1596bdefe630d962713e7429136e0b6e
Library Update
- New symbols
- AM-200 (Air Media 2.0+)
- AM-300 (Air Media 2.0+)
- Updated
- added support of release 3.0 to the following:
- NVX-350
- NVX-350C
- NVX-351
- NVX-351C
- NVX-352
- NVX-352C
- NVX-E30
- NVX-E30C
- NVX-D30
- NVX-D30C
- DN-NVX-D80-IOAV
- DM NAX (AES67)
- DM-XIO-Routing
Fixes/Changes from 115.00.002 to 115.05.002:
MD5 Hash: f0d244399362e869c1495d1ebf4cb622
Library Update
Fixes/Changes from 114.00.001 to 115.00.002:
MD5 Hash: e37bc7265f51db6ff60acdbbe1e3d1df
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.12.040
- Platform information available when using JsonDb outside of a SIMPL# application. Adding changes to use JsonDb on newer firmware.
- SSP-551: Updating default parameters for the HTTB10-Ex to line up with SIMPL Windows.
- SSP-528: Updated SSP class of HTT-B10EX according to Symbl version 1.025
- SSP-544: Fixed the bug of buttonIndex mapping of HTT-B10EX Feedbacks
- SSP-546: Reverted button order change from previous commit.
- Resolved backwards compatibility issue where GetPlatformModel() was used instead of reading the using one of the IsXXXPLatform calls.
- Adding changes to use JsonDb on newer firmware.
- Modified the TLDM RCV thread to check if the control system is not null before processing a message for the control system.
Toolbox
Fixes/Changes from 113.05.001 to 114.00.001:
MD5 Hash: c7ea20f4947faec09e47e84846b6d287
Toolbox
- Added support for Yale Lever Locks
Fixes/Changes from 112.00.001 to 113.05.001:
MD5 Hash: 75af3b5c7f4f7f079c5e4fbfa4b79f7c
Library Update
- New symbols
- CEN-IO-RY-204
- CEN-IO-DIGIN-204
- CEN-IO-IR-204
- CEN-IO-COM-202
Toolbox
- Added support for ZUMMESH-JBOX-DALI
Fixes/Changes from 111.05.001 to 112.00.001:
MD5 Hash: c975fba4d0e7deca716a4a9cb6bd4c85
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.12.008
- Add Support for CNXPAD8 family
- Add support for CEN-ODT-C-POE
- Add Ability to launch Zoom App
- Fix issue where http client does not send custome port to the Host header
- Fix issue where DIN-2LEDPWM8 min/max levels not working correctly
- Fix issue where ability to control HDCP status of DMC-4K-HD cards (non-HDCP2 version) not woking properly.
Fixes/Changes from 111.00.001 to 111.05.001:
MD5 Hash: cb43b3e6910fb9ea6eede8a48fe8f075
Library Update
- New symbols
- HD-RX-4K-410-C-E-SW4
- HD-RX-4K-510-C-E-SW4
Toolbox
- HD-RX-4K-410-C-E-SW4
- HD-RX-4K-510-C-E-SW4
Fixes/Changes from 110.05.001 to 111.00.001:
MD5 Hash: 7f0f550fa3696b8dcbc579ce442070a5
Library Update
- New symbols
- Rhombus (cresent connected keypad)
- Eutech (cresent connected keypad)
- HD-RX-4K-410-C-E
Toolbox
- Rhombus (cresent connected keypad)
- Eutech (cresent connected keypad)
- HD-RX-4K-410-C-E
Fixes/Changes from 109.05.001 to 110.05.001:
MD5 Hash: 68dd002647874b654363fa10cb166910
Toolbox
Fixes/Changes from 109.00.001 to 109.05.001:
MD5 Hash: 3c6f39e13376070969e56b2ccd5eb44b
Library Update
- New symbols
- DM-NVX-D80-IoAV
- CEN-ODT-C-POE
- UC-Engine-SD-Z
Toolbox
- DM-NVX-D80-IoAV
- CEN-ODT-C-POE
- UC-Engine-SD-Z
Fixes/Changes from 108.05.001 to 109.00.001:
MD5 Hash: 2b352c2a7fd3c423123c47ce3bccf240
Library Update
- New symbols
- HZ-DIMEX
- HZ-DIMLVEX
- HZ-DIMUEX
- HZ-KPEX
- HZ-SWEX
Engraver
- HZ-DIMEX
- HZ-DIMLVEX
- HZ-DIMUEX
- HZ-KPEX
- HZ-SWEX
Fixes/Changes from 107.00.001 to 108.05.001:
MD5 Hash: 4e039fcb115921547de4958c64c9f7f8
Library Update
- New symbols
- HD-RX-4K-510-C-E
- UC-Engine-Zoom
- Updated
- INCLUDE4.DAT (3 series) version 2.11.030
- Implemented ActiveDirectoryLogin() and ActiveDirectoryLogout() API in CrestronAuthentication.Authentication class to provide AD login for local user.
- Implemented GetGroups() API in CrestronAuthentication.Authentication class to get domain and local group name along with its access level.
- Supporting GetAccessLevelForSpecifiedUser method in CrestronAuthentication.Authentication - this will return the access level for a given user.
- Added video out joins to DmxioDirectorBase
- Added support for DM-TX-201-C2 and DM-TX-200-C2-2G, DM-TX-4KZ-100-C-1G SSP device classes.
- Update class to Save Output Timeout Setting' to HD-RX-4K-510/410-C-E(-SW4)
- Added support for UCEngine
- Fix issue with CspParameters.KeyContainerName - It was not working properly to identify the key container in which an asymmetric key pair was be stored.
- Fix issue where registering a DMF device in S# Pro results in an invalid cast exception
VTPro-e
Toolbox
Fixes/Changes from 106.05.001 to 107.00.001:
MD5 Hash: 1e0170ad9d47aa602b4adad79a354b31
Library Update
- New symbols
- Added Black Nova Keypad support.
Fixes/Changes from 106.00.001 to 106.05.001:
MD5 Hash: 1e0170ad9d47aa602b4adad79a354b31
Library Update
- New symbols
- TSR 310 - Added Apple HomeKit SIMPL support
- Updated
- INCLUDE4.DAT (3 series) version 2.11.011
- Fix bug where SecureTCPServer's State property can enter an invalid state on reaching maximum number of sockets
- Add support to Authentication class for retrieving the access level of a specified user
- Updated Frequency ParameterPwmFrequency property in DIN-2LEDPWM8 SSP class to use specific values
Fixes/Changes from 105.07.001 to 106.00.001:
MD5 Hash: f199ea3dafe8cacaf3fa745680db8b74
Engraver
- SSW-ACR-102-EL
- SSW-102-EL KIT
- SSC-102-EL KIT
- SSC-ACR-102-EL
Fixes/Changes from 105.05.001 to 105.07.001:
MD5 Hash: fa30fcd8662e1fd2e2e331789b9464aa
Library Update
VTPro-e
Toolbox
Fixes/Changes from 105.00.001 to 105.05.001:
MD5 Hash: 9c373ac08cf0476315b1dd1df4db59a3
Library Update
- New symbols
- DM-RMC-4KZ-Scaler-C
- DMC-4KZ-HDO
Fixes/Changes from 104.05.001 to 105.00.001:
MD5 Hash: 6961e2cececd566c29e3c5254baa92aa
Library Update
- Updated
- DIN-THSTAT
- Zoom Room App device extender to support Zoom call hang up.
- TSW-760
- TSW-760-NC
- TSW-1060
- TSW-1060-NC
Fixes/Changes from 103.05.001 to 104.05.001:
MD5 Hash: 7ede93a2160ca6d99359e5ffeecf12e1
Library Update
- Updated
- AM-200
- AM-300
- INCLUDE4.DAT (3 series) version 2.10.077
- Removed Internal Controller from DIN-THSTAT (obsolete)
- Updated S# support for HD-TX-x01 family of devices
- Fix bug with S+ time functions when timezone changes
- Updates to AM-200/300 Symbol
- Stability enhancements to MPC3
- Updated S# support for DmRmc4kzScalerC
Fixes/Changes from 102.05.001 to 103.05.001:
MD5 Hash: 17d5937b2fe4ad712c35c34f4bf07717
Library Update
- Updated
- MPC3-101 and MPC3-102 Fix
- Included new features for DM-NVX Layer 3 USB Routing, USB Multipoint support, and USB-EXT-DM-Support.
- DM-NVX-350(C)
- DM-NVX-351(C)
- DM-NVX-352(C)
- Included new features for DM-NVX Layer 3 USB Routing, USB Multipoint support, and USB-EXT-DM-Support.
Toolbox
Fixes/Changes from 101.05.001 to 102.05.001:
MD5 Hash: 00f8914acaf8615002c5e0daf43cd3e7
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.10.049
- SSP-85: Release Simpl Sharp Pro Support for DIN-THSTAT
- SSP-84: Release Simpl Sharp Pro Support for DIN-2LEDPWM8 (including Coverity Issues 54124, 54123, 54122)
- SSP-99: Release Simpl Sharp Pro Support for GLS-LCCT
Toolbox
Fixes/Changes from 100.07.001 to 101.05.001:
MD5 Hash: f199ea3dafe8cacaf3fa745680db8b74
Library Update
- New symbols
- DIN-THSTAT
- GLS-LCCT
- CCS-UC-CODEC-250
- MPC3-101-B
- MPC3-102-B
VTPro-e
Toolbox
Engraver
Fixes/Changes from 100.05.003 to 100.07.001:
MD5 Hash: 8ff96f522588f9502165d7ec3f3782b8
Library Update
- New symbols
- DMC-CPU3
- DM-MD8x8-CPU3
- DM-MD16x16-CPU3
- DM-MD-32x32-CPU3
- DM-MD-8x8-CPU3-RPS
- DM-MD-16x16-CPU3-RPS
- DM-MD-32x32-CPU3-RPS
Fixes/Changes from 100.02.005 to 100.05.003:
MD5 Hash: 060154521d3b2433b5f8787677367f96
Library Update
- New symbols
- AMP-2800
- AMP-4600
- DM-NVX-352
- DM-NVX-352-C
- DM-NVX-D30
- DM-NVX-D30-C
- DM-NVX-E30
- DM-NVX-E30-C
- CEN-IO-DIGIN-104
- CEN-IO-IR-104
- CEN-IO-COM-102
- CEN-IO-RY-104
- UC-Engine
Toolbox
- DM-NVX-352
- DM-NVX-352-C
- DM-NVX-D30
- DM-NVX-D30-C
- DM-NVX-E30
- DM-NVX-E30-C
- CEN-IO-DIGIN-104
- CEN-IO-IR-104
- CEN-IO-COM-102
- CEN-IO-RY-104
VTPro-e
Fixes/Changes from 100.00.001 to 100.02.005:
MD5 Hash: 997d365901a20a870d3c33462909287a
Engraver
Fixes/Changes from 99.02.002 to 100.00.001:
MD5 Hash: 6e284568f3cb336b52c4ccbef0e09a7d
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.10.029
- New joins for DM-RMC-4K-SCALER-C and DM-RMC-4K-SCALER-C-DSP.
- Moving the CEN-IO-10x devices to released.
- Modified the bitmask of the EISCServer to not request for reserved joins.
- Added try-catch around SendDisconnect with error logging to prevent unhandled exception on socket error.
- Updated the documentation for Leds property in StatusSign class.
- Allowing endpoints to be added to the DM-MD-8x1-4K-C.
- Updated for the DIN-THSTAT changes. Renamed from CLInputActive to AuxInputActive
- Added the SSP classes for DM-NVX-352 and DM-NVX-352C devices and updated the SSP classes for DM-NVX-35X(C),DM-NVX-E3X and DM-NVX-D3X devices as per the latest Symbol.
- Resolved issue where endpoints being added to the XIO Director could not be added with the same endpoint IDs between TX and RX.
- Added ramping critical section usage when a UShortOutput is changing it's ramp information to a TiedSig.
- Removed the Reboot and RebootRequiredFeedback joins for DM-NVX-D30 and DM-NVX-D30C devices as per the SIMPL Windows Symbol change.
- Resolved issue reported on LABs where the MasterMicMuteOn/Off feedbacks were missing on the DMPS3 Output Mixer.
- Added firmware check for the "SetClientPrivateKey" function to verify we are running on a minimum firmware of 1.502.0048.
- Fix for analog values being reset front panel of the MPC3-101/102.
- Fix issues with OnVif discovery of certain cameras.
Fixes/Changes from 99.00.001 to 99.02.002:
MD5 Hash: 93448b221b4f9a6ce674c95bfcfce567
Library Update
- Updated
- TSW-760-NC (Zoom Room App device extender)
- TSW-1060-NC (Zoom Room App device extender)
Toolbox
Fixes/Changes from 98.05.001 to 99.00.001:
MD5 Hash: 6fe7d96acdbe84c019b99dfc52d6c90a
Library Update
- Updated
- TSW-560
- TSW-760
- TSW-1060
- TSW-760-NC and TSW-1060-NC (Zoom Room App device extender will be available in the next Device Database)
Fixes/Changes from 98.00.002 to 98.05.001:
MD5 Hash: af5dc0799b5560c6d1a37a2b71aa806f
Library Update
Fixes/Changes from 97.07.001 to 98.00.002:
MD5 Hash: d30ba561be4fb2b8148f04569a758850
Library Update
Toolbox
Fixes/Changes from 97.05.001 to 97.07.001:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.09.036
- Added S# class for HD-MD-200-C-1G-E
- Fixed SSL connection issue that occurred with some clients
- Resolved S+ issue on older versions of FW
Fixes/Changes from 97.00.001 to 97.05.001:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.09.031
- Am200 and Am300 are in Crestron.SimplSharpPro.DM.AirMedia namespace (Crestron.SimplSharpPro.DM reference)
Fixes/Changes from 96.05.001 to 97.00.001:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- DM-NVX-350
- DM-NVX-350C
- DM-NVX-351
- DM-NVX-351C
Toolbox
Fixes/Changes from 96.00.003 to 96.05.001:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- New symbols
- AM-200 (Requires firmware version 1.3781.00018.002 or later to enable programing functions.)
- AM-300
- HD-MD-200-C-E
- HD-MD-200-C-1G-E
Fixes/Changes from 95.05.002 to 96.00.003:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
VTPro-e
Toolbox
- AM-200
- Crestron SDK support for AVR receivers
Engraver
- Zummesh-KP10FBATT
- Zummesh-KP10GBATT
Fixes/Changes from 95.00.002 to 95.05.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e Library Update
- New symbols
- CLW-DIMFLVEX 230v
- CLW-DIMFLVEX 277v
VTPro-e
Toolbox
NOTE: Stand-alone Crestron S# and S::Pro libraries are provided for development using C# development environments other than Visual Studio 2008 Pro. Only supported on Crestron Virtual Control
Fixes/Changes from 94.05.002 to 95.00.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.09.012
- Modified SIMPL# Pro to throw an exception on VC-4 when registration with the TLDM fails.
- DinDali2 DaliBallast class:
- Add() and Remove() no longer take parameters.
- Implement GroupNumber property.
- InGroupFeedback() is now a property called InGroupFeedback and no longer a method.
Fixes/Changes from 94.00.001 to 94.05.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- DMC-4KZ-HD
- DMC-4KZ-HD-DSP
- DM-TX-4KZ-202-C
- DM-TX-4KZ-302-C
- DMC-4KZ-C
- DMC-4KZ-C-DSP
VTPro-e
Toolbox
Fixes/Changes from 93.05.003 to 94.00.001:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- New symbols
- DMC-4KZ-C
- DMC-4KZ-C-DSP
- DM-TX-4KZ-202-C
- DM-TX-4KZ-302-C
- Updated
- Crestron App
- INCLUDE4.DAT (3 series) version 2.09.006
- Adjusted "FputFile" and "FgetFile" for HTTP Client and HTTPS Client code in SIMPL#.
- Fix an issue with relative events when the TimerEngine is running in UTC
- Added missing XML documentation for DM-RMC-150 SSP class. Removed error messages for properties/joins when those are accessed but not supported by specific devices.
- Fix issues with page join gating where digitalis that changed to low while not on a page would not be refreshed correctly when you flipped back to the page that used them.
- Updated the Obsolete attribute messages for some methods/properties and also returning NullSig for Resolution and ResolutionFeedback properties as these properties are no longer supported.
- For TSW-xx60 changed the RedLedControl/GreenLedControl/BlueLedControl methods to properties, marked the Resolution and ResolutionFeedback properties as obsolete. Added missing properties for some joins in System3 Extender as per the latest SIMPL Windows Symbol
Fixes/Changes from 93.00.002 to 93.05.003:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- New symbols
- CLCI-MCEX
- DIN-1TSTAT8
- HZ-KPCN
- TSW-760-LB
- TSW-1060-LB
Engraver
Toolbox
- CLCI-MCEX
- DIN-1TSTAT8
- HZ-KPCN
Fixes/Changes from 92.05.001 to 93.00.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- TSR-310 - Client Dialog Extender
VTPro-e
Engraver
Fixes/Changes from 92.00.002 to 92.05.001:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- DM-NVX
- INCLUDE4.DAT (3 series) version 2.07.016
- Add support for the following devices.
- MPC-302
- TT2-1XX
- TSW lightbar support
- Horizon Keypad
- EISC Client, EISC server : Similar to 3 Series EISC, but does not base off of address to determine who is the client/server.
- XioEdgeEISCClient: Meant to connect to an XioEdge server and passes in the program instance Id which allows it to bypass the Device To Program mapping table.
- Use in conjunction with the XIOEDGESERVERADDR console command to set the server.
- General Changes
- Crestron.SimplSharp.Cryptography namespace:
- Fix bug with Padding property in SymmetricAlgorithm class.
- Added classes for HMACSHA256/384/512 algorithms.
- Added classes for PBKDF2SHA256/384/512 algorithms.
- In event handlers instead of using ForceHdcpEnabledFeedback and ForceHdcpDisabledFeedback to check if the event received is for the corresponding feedback join, used the corresponding fields to prevent access to the properties unnecessarily.
- Changes to devices
- Fixed incorrect XML comment spacing in GlsOirCCn
- MPC3: Link to a property is added in the XML comment for "AmbientLightThresholdForAutoBrightnessAdjustment" property.
- Added new "LcdBaclklightOff" to Mercury reserved join to MercurySystemReservedSigs
- Added to Fusion Asset - HVAC Zone missing TempIncelsius property.
- Changes made to throw a NotSupportedException exception for ColorSpaceMode, ColorSpaceModeFeedback, Stream3DStatusFeedback and AspectRatioModeFeedback properties for unsupported joins.
- Fix for Dispose method is not able to fully disposing of card "DM-RMC-4K-100-C-1G"
- DinDali2: Corrected the name from eCommonControlCommandCodes.SetStrY to eCommonControlCommandCodes.SetDtrY.
- Updated the CCS-UC-CODEC-300 device SSP class as per the latest symbol.
- Updated the DMC-S/DMC-S-DSP/DMC-S2/DMC-S2-DSP device SSP classes to add AudioFormatFeedback, AudioChannelsFeedback, AudioSamplingFrequencyFeedback, DelayFeedback.
- Resolved issue where "ParameterFakeFeedback" for Horizon keypads was modifying a parameter on the wrong subslot.
- MPC-302
- TT2-1XX
- TSW lightbar support
- Horizon Keypad
- EISC Client, EISC server : Similar to 3 Series EISC, but does not base off of address to determine who is the client/server.
- XioEdgeEISCClient: Meant to connect to an XioEdge server and passes in the program instance Id which allows it to bypass the Device To Program mapping table.
- Use in conjunction with the XIOEDGESERVERADDR console command to set the server,
- DMC-STR: Removed local enum "eStreamingTransportModes" that is duplicated in the DM namespace already. This one was not updated to the latest.
- Added event handling for HdcpSupportOffFeedback join for DM-TX-20X-X devices.
- Moved the System2Reserved Extender off the Tsrbase to the Tsr302 class as this is not supported on the TSR-310.
- Added the new extender called "Dialog Client" to TSR-310 SSP Class
- Removed "DockedPowerDownTimeout, DockedPowerDownTimeoutFeedback, DockedPowerDownTimeoutUp, DockedPowerDownTimeoutDown " from System3 extender on TSR-310
- Updated the SSP Class for DIN-FSTAT-FCU as per the latest SIMPL Windows Symbol
- Enabled the Execute methods in DaliLoop class for sending two byte and three byte commands.
- Remove "DMCI" from the expected name for non DMCI cards, which was causing errors when cards were added to DM switchers.
- Modified the LoadShedEnable in ZummeshNetbridge to be a property instead of method since it is now level sensitive.
- DMCSTR and NVX: Marked ElapsedSecondsFeedback property in Top Level Slot, ElapsedSecondsFeedback property in SecondaryAudio slot, and EnableAutomaticRouting(),
- DisableAutomaticRouting() methods and EnableAutomaticRoutingFeedback, DisableAutomaticRoutingFeedback, OutputName, OutputNameFeedback properties in XIO
- Routing slot as Obsolete as the corresponding joins are removed from the SIMPL Windows Symbol of the DM-NVX-35xx devices.
- XIODIRECTOR: Fix bug that would have prevented the last endpoint from being created.
- Bug Fixes
- Corrected GetChildOrPortDevice() call to allow GLS-SIM to work properly
- Added "SSDebugEnable" to enable S+ and S# application debugging for programmers (requires BSP change)
Fixes/Changes from 91.07.002 to 92.00.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
Toolbox
- MPC3-302
- AM-300
- DSP update for Hydrogen
Fixes/Changes from 91.05.002 to 91.07.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
Fixes/Changes from 91.00.002 to 91.05.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.07.012
- Add support for the following devices.
- Dmc4kzHd
- Dmc4kzHdDsp
- Dmc4kzCoHdSingle
- DmRmc4kz100C
- Bugs Fixed:
- Updating the bit fields for the DmRmc to resolve issue where relays were not accessible for 15 seconds after connect.
- Added the HDCP Transmitter Mode joins for DM Output and HDMI Outputs and HostDeviceDetectedFeedback join to the DM-TX-4K-302/202-C device classes. Bug 124085
- Updated the 4KZ input card SSP classes to disable the "HDMI_Out_Color_Space_Mode" joins. Bug 141939
- Resolving issue where the StopRamp function could possibly not send a ramp to the TiedOutput sig if the value to stop at matched the current "ramping" value of the output.
- Updated NVX device to remove properties
- Updated support for the TT-xxx devices for multiple DM endpoints
- Resolving issue where the StopRamp function could possibly not send a ramp to the TiedOutput sig if the value to stop at matched the current "ramping" value of the output.
- Fixed the issue with ForceHdcpEnable/ForceHdcpDisable and corresponding feedback joins in DMC-4KZ-CO-Hd and DMC-4K-CO-HD device classes.
- Corrected the device name for DMC-4K-HD and DMC-4K-HD-DSP devices. Also support for Color Space Mode and Color Space Mode Feedback joins removed for HdmiInput port as per the latest symbol
- Updated support for the MPC3 device
VTPro-e
Toolbox
Fixes/Changes from 90.05.002 to 91.00.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- New symbols
- DMC-4KZ-CO-HD
- DMC-4KZ-HD
- DMC-4KZ-HD-DSP
- DM-RMC-4KZ-100-C
- Vitrea Keypads
- Creslight Keypads
- Updated
- CLX-2DIMU8
- DMC-4KZ-HD
- DMC-4KZ-DSP
- HDCP
Fixes/Changes from 90.02.001 to 90.05.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- DM-NVX-35xC
- INCLUDE4.DAT (3 series) version 2.07.005
- SSP
- Added support for MPC3-201 - Touchscreen Control System
- Added support for HR310 - Handheld Remote
- Added support for TSR310 - Handheld Touch Screen Remote
- Fix issues with TSR-302
- Added support for GlsOirLclCCn
- Ceiling Mount Passive Infrared Occupancy & Daylight Sensor, Cresnet
- Added support for CsmQmtdcHsheerCn
- Cresnet based 1Nm digital QMT shade motor
- Added support for CsmQmtdcHsheerEx
- infiNET EX based 1Nm digital QMT shade motor
- Update the DM-NVX-35xx device support in SSP
- Fix issues with PresentValueFeedback throwing an exception for dynamic bacnet
- Simpl #
- Fixed handling of message type 80 in S# SSH client
- Added internal SSP Object Pooling
Toolbox
Engraver
Fixes/Changes from 90.00.001 to 90.02.001:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Toolbox
Engraver
Fixes/Changes from 89.05.004 to 90.00.001:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- Updated
- DM-XIO-DIR-80
- DM-XIO-DIR-160
- DM-XIO-DIR-ENT
- DGE-200
Fixes/Changes from 89.00.003 to 89.05.004:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- New symbols
- DM-XIO-DIR-80
- DM-XIO-DIR-160
- DM-XIO-DIR-ENT
- Horizontal Sheer Roller
- HR-310
- Updated
- INCLUDE4.DAT (3 series) version 2.05.047
- Fixed handling ofmessage type 80 in S# SSH Client
Engraver
Fixes/Changes from 88.05.003 to 89.00.003:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- New symbols
- DMPS3-4K-250-C
- DMPS3-4K-350-C
Toolbox
- DMPS3-4K-250-C
- DMPS3-4K-350-C
Engraver
- DMPS3-4K-250-C
- DMPS3-4K-350-C
Fixes/Changes from 88.00.002 to 88.05.003:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
Toolbox
Fixes/Changes from 87.05.001 to 88.00.002:
MD5 Hash: 7b41de0104237dc7034032bc6a3bc51e
Library Update
- New symbols
- Basalte Auro
- GLS-OIRCL-C-CN
- Updated
- INCLUDE4.DAT (3 series) version 2.05.046
- SSP
- Added support for the ClsC6 / ClsC6M
- Added support for the ZummeshNetbridge
- Updated symbol for the DMPS3-4K-250/350 device
- Resolved issues with String transmissions in SSP.
- Updated the RFGateway device class for the new move methods. These are supported on the CenExER gateway only.
- Changes for updating the symbol for the DMPS3-4K-x50 for the Air Media slot.
- Resolved bug 137125 - Adds the ability for SIMPL# Pro to send a new Digital Join value to the System Control Slot of the DMPS-4K Systems when Endpoints are added to the DM Ports.
- Resolved bug 137188- Increased the size of joins supported in SIMPL# Pro for the ShadeControl subslot. This will allow the tilt join to be added for the new HSHEER devices.
- Simpl #
- Added new property to return the serial number - requires min firmware of 1.503.0000
- Resolved bug 132279
- Resolved bug 135227 - resolve issue with the TCPServer not detecting a disconnect properly.
- Resolve issue with the WorkerCollection.Close throwing an unhandled exception.
Toolbox
Engraver
- Added support for ZUMMESH-KP10AV4BATT
- Added support for ZUMMESH-KP10AV5BATT
Fixes/Changes from 87.00.003 to 87.05.001:
Library Update
- Updated
- DIN-TSTAT-FCU
- Crestron App - Added KeyClick support.
Fixes/Changes from 86.05.003 to 87.00.003:
Toolbox
- TSWx60 updated for Helium
- DGE-100
- DM-DGE-200-C
VTPro-e
- CCS-UC-CODEC-ENGINE-300 (Crestron SR)
- TS-1542-C: Added Embedded App support
Fixes/Changes from 86.00.003 to 86.05.003:
Library Update
- New symbols
- Yale nexTouch Keypad Access Locks
- Updated
- CCS-UC-CODEC-ENGINE-300 (Crestron SR)
- INCLUDE4.DAT (3 series) version 2.05.040
- SSP
- Support for the CLS-C6 and CLS-C6-M device
- Updated the symbol for the DMPS3-4K-x00 devices
- Simpl #
- Enhanced support for the Extended device services
Toolbox
- Yale nexTouch Keypad Access Locks
VTPro-e
- CCS-UC-CODEC-ENGINE-300 (Crestron SR)
Fixes/Changes from 85.05.003 to 86.00.003:
Library Update
- New symbols
- CCS-UC-CODEC-ENGINE-300 (Rigel)
- DIN-TSTAT-FCU
- Updated
- INCLUDE4.DAT (3 series) version 2.05.037
- SSP
- Add support for the DIN-TSTAT-FCU device
- Update the Application Control Extender for the TSW-x60 / DM-DGE-200 / TS-1542 devices
- Updated support for DMPS3-4K-x50
- Support for TT-1xx device to add to the HD-WP-4K-401-C
- Updated the DM-NVX device class
- Update the SystemReservedSigs for the TSW-x60 for the AutoBrightness properties.
- Resolve issues with the HD-MD-300-CE device
- Simpl #
- Add support for Extended Services
- Add SNTP class in S#
- Resolve an unhandled exception being thrown in S# with the SSH client disconnecting when we unplug the ethernet cable
Toolbox
- CCS-UC-CODEC-ENGINE-300 (Rigel)
- DIN-TSTAT-FCU
VTPro-e
- CCS-UC-CODEC-ENGINE-300 (Rigel)
Engraver
- Added support for Status Sign Ceiling (SSC)
Fixes/Changes from 85.00.002 to 85.05.003:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.05.032
- SSP
- Add support for the HDBT endpoints for the DM-MD6x6 and 6x4 switchers
- Resolve issues with 1G endpoints on the DMPS3-4K-300/ DMPS3-4K-200 device
- Resolve issue with the Dispose method throwing an exception on the IBridgeDevice
- Updated the PC-300 device
- Added support for the ST-IO and ST-COM devices
- Updated the DM-NVX-35xx devices
- Updated the Dmc4KHd and Dmc4KHdDsp devices to add support for the HdcpSupportedLevel and HdcpSupportedLevelFeedback. Also resolved the device names which go out as a parameter on an update request to the DM Switch.
- Updated the parameter name for the Dmc4KCoHd device which is sent to the DM switch on an update request
- Add support for CHV-TSTAT-FCU device
- Add support for the HdMd300CE device
- Performance improvements with the RCB's in SSP.
- Add support for the StatusSign device also.
- Resolve issues with Shade Broadcast group
- Simpl #
- Resolve issues with the WebSocketClientOpenSessionAsyncWithHostAndKeepAlive method.
- Updated the EthernetAutoDiscovery.Query method to take in the ethernet adapter also.
- Resolve issue with calling the Dispose method on the ScheduledEvent
- Perfomance improvements or the TCPServer and the SecureTCPServer in S#.
- Support for the Dispose functionality for SCPClient/SSHCLient in S#.
- Resolve issue with the WaitForConnectionAsync on the SecureTCPServer
- SPLUS Compilation
- Resolve issues with S# classes with multiple indexers
Fixes/Changes from 84.05.002 to 85.00.002:
Library Update
- Updated
- Crestron Connected (Basalte Keypads)
Toolbox
- Status Sign Wall (SSW)
- Mercury
Fixes/Changes from 84.00.003 to 84.05.002:
Library Update
- New symbols
- Status Sign Wall (SSW)
- HD-MD-300-C-E
Toolbox
Engraver
Fixes/Changes from 83.05.001 to 84.00.003:
Library Update
- Updated
- DM-NVX-350
- DM-NVX-350C
- DM-NVX-351
- DM-NVX-351C
Fixes/Changes from 83.00.001 to 83.05.001:
Library Update
- New symbols
- DM-NVX-350
- DM-NVX-350C
- DM-NVX-351
- DM-NVX-351C
Toolbox
- DM-NVX-350
- DM-NVX-350C
- DM-NVX-351
- DM-NVX-351C
Engraver
- Added support for DMPS3-4K-200-C
- Added support for DMPS3-4K-300-C
Fixes/Changes from 82.05.002 to 83.00.001:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.05.020
- SSP
- Resolved the issue with the incorrect joins being sent to the 4HSW4 device on an update request.
- Added new TSW-560P / TSW-560NC / TSW-760NC and the TSW-1060NC devices
- Simpl #
- Resolve the issue connecting to CISCO codec's running firmware version 8.3
- Resolve the issue with the cresnet helper not returning all the devices if there were older devices which were not reporting the versions in the proper format.
- Resolve the issue with the ONVIF class with not being able to discover devices on the LAN side of a unit with a router.
Fixes/Changes from 82.00.002 to 82.05.002:
Library Update
- New symbols
- TSW-560-P
- TSW-560-NC
- TSW-760-NC
- TSW-1060-NC
- PC-300
- Updated
- INCLUDE4.DAT (3 series) version 2.05.020
- SSP
- Update the Am101 class to expose the new AirPlayUser also.
- Added support for the Amp8075 and Amp8175 device
- Added support for the PC300 device
- Enhanced the FusionAssetBase to have an Owner property which returns the FusionBase.
- Resolved the issue with the PresetChannelName and PresetChannelNumber feedback collection on the XM and Sirius cards.
- Resolved the issue with the Override joins not being sent to the Clx1DelV4 / Clx1Dim4 / Clx1Dim8 / Clx2Dim2 and the Clx2Dim8 devices.
- Simpl #
- Resolve issue with the SSH client not throwing an event on receipet of the servers host key.
- Added support within the CrestronEnvironment.SystemEventHandler to throw the eSystemEventType.TimeChange event also.
- SPLUS Compilation
- Update NVRAM utility failure reporting.
- Update SplusHeader utility failure reporting.
Toolbox
- CLXI-2DIMFLV8
- CLXI-2DIMU8
- PC-300
- TSW-560-P
VTPro-e
- TSW-560-P
- TSW-560-NC
- TSW-760-NC
- TSW-1060-NC
Fixes/Changes from 81.05.003 to 82.00.002:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.05.017
- SSP
- Modified ssptasks command to show thread's name, if set
- Updated the DSP-xxx classes for the POTS and VOIP extender
- Modified the GenericEventArgs to derive off the EventArgs also
- Updated the DSP-xxx for the auxilliary input/output slot
- Corrected status indication of DM endpoints
- Corrected closely spaced update requests blocking data from being sent out
- Updated the fusion classes to allow the user to not add Predefined sigs to the RVI file
- Simpl #
- HTTP(s) client will now throw an exception if we get redirected to a HTTP site
- Added UrlEncodeUnicodeToBytes to the HttpUtility class
- Fixed CrestronQueue locked up when full and have to reset the program to recover
- Fixed the versions of the SimplSharpCryptography and SimplSharpTimerEventInterface
- Resolved issues with the Onvif classes
Fixes/Changes from 81.00.002 to 81.05.003:
Library Update
- New symbols
- HD-WP-4K-401-C
- DMPS3-4K-300-C
- DMPS3-4K-200-C
- PC-200
- Updated
- DM-DGE-200-C
- INCLUDE4.DAT (3 series) version 2.05.016
- SSP
- DMPS3-4K-x00 support
- Added TSW-x60 device support
- Added PC-200 device
- Added HD-WP-401K-C device
- Resolved issue with the threads not shutting down properly when we stop a SSP program
- Updated the VOIP extender for the missing properties.
- Updated TT-1xx device class
- Added support for DMC-4K-HDO
- Added support for the Autonomics 1E device
- Optimize loading of SGD files
- Resolve issues with the ClwDimFlvExP
- Update the TieInputToOutput to be a bidirectional tie.m.
- Simpl #
- HTTP(s) client will now throw an exception if we get redirected to a HTTP site
- Add UrlEncodeUnicodeToBytes to the HttpUtility class
- Made the HTTP(s) client classes support the IDisposable
- Add support for the EthernetAdaptertoBindto for the HTTPServer also
Toolbox
- HD-WP-4K-401-C
- DMPS3-4K-300-C
- DMPS3-4K-200-C
- PC-200
VTPro-e
Fixes/Changes from 80.05.002 to 81.00.002:
Library Update
- New symbols
- CAEN-BLOCK-CENCN-2-POE
- CHV-TSTAT-FCU
- CHV-TSTAT-010V-FCU-PIR
- Yale Door Locks
- TSW-560
- TSW-760
- TSW-1060
- Updated
- Avia™ Symbols:
- DSP 860
- DSP 1280
- DSP 1281
- DSP 1282
- DSP 1283
Toolbox
- CLX-2DIMU8-277
- CAEN-BLOCK-CENCN-2-POE
- CHV-TSTAT-FCU
- CHV-TSTAT-010V-FCU-PIR
- Yale Door Locks
- TSW-560
- TSW-760
- TSW-1060
VTPro-e
Fixes/Changes from 80.00.002 to 80.05.002:
Library Update
- New symbols
- Autonomic MMS-1E
- INETS-IOEX-DOOR-BATT
Toolbox
Engraver
- Added support for CLW-DIMFLVEX-230-P
- Added support for CLW-DIMFLVEX-277-P
Fixes/Changes from 79.05.002 to 80.00.002:
Library Update
- New symbols
- CLX-2DIMFLV8
- CLXI-2DIMLFV8-277
- CLX-2DIMFLV8
- CLW-DIMFLVEX-230-P
- CLW-DIMFLVEX-277-P
- Updated
- CSA-PWS10S-HUB-ENET
- DIN-CENCN2
Toolbox
- CLX-2DIMFLV8
- CLX-2DIMFLV8-277
- CLXI-2DIMLFV8
- CLW-DIMFLVEX-230-P
- CLW-DIMFLVEX-277-P
Fixes/Changes from 79.00.001 to 79.05.002:
Library Update
- Updated
- DMB-4K-I-C Symbol
- DMB-4K-I-HD Symbol
- CEN-NSP1
- ATC-AUDIONET
- INCLUDE4.DAT (3 series) version 2.04.038
- SSP
- Support for the DM4K1000SFP device
- Resolve exception thrown when trying to dynamically create SmartObjects in S# Pro
- Modify the GlExpDimfdbCn device to add support for adding it to a IDeviceBranch
- Simpl #
- Resolve an issue with the SetTimezone method breaking backwards compatibility
- Resolve issue with exceptions being thrown in the SSH Clients Dispose method.
- Fix the comments for the AllowAutoRedirect for the HttpClient and HttpsClient. This is true by default.
- Added HtmlAttributeEncode, HtmlDecode, HtmlEncode functions to the HttpUtility static class.
- Simpl Plus
- Resolve issue with S+ Direct socket server getting into an invalid state based on a specific client timing issue . Added a new SOCKET_STATUS_UNABLE_TO_BIND – In this case, the programmer needs to close the server and re-enable the server.
Fixes/Changes from 78.05.001 to 79.00.001:
Library Update
Toolbox
Fixes/Changes from 78.00.001 to 78.05.001:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.04.036
- Simpl Plus
- Resolve Gather/Find/String issues introduced in 2.04.032
- Resolve issue with GatherAsync being invoked in the callback
- SSP
- Add ShortValue to SigGroup
- Updated Shade and Drape classes
- Support for C2nSSc2 / C2nSdc and the C3nSdcDc devices
- Modified the PowerSupplyStatusFeedback for the CsaPws10shub to be eShadePowerSupplyStatus.Normal
- Add support for CS-PWS10S-HUB-ENET device
- Support for Am101 device
- Add support for Ts1542c device
- New constructors for TSW-732/752/552/1052 ; TSS-752 and the TST-602 device
- Updated Dm-Tx20x and Dm-Tx40x device
- Updated GL-XX devices
- Updated GL-EXP-DIM and GL-EXP-SW devices
- Updated FLXXX-2DIM8 device
- Reset RTS and TX/RX strings when we change comspec on the fly
- Simpl #
- Crestron Data Store fixes
- Fixed GetNextLocalTag and GetNextGlobaTag
- Fixed LONG and ULONG returning strings
- optimized data store writes
- XML NodeList implements IEnumerable interface
- Websocket fixes
- Token handler was missing a "break".
- Ping/Pong fix where datalen parameter check was incorrect.
- Keep-Alive fixes
- Resolved issues with WebSocketCilentReceive Async
- Resolve issue with the HTTPS client CONNECT is improperly formed and causes proxy to reject
- Enable/Disable Authentication function only returns after the state has changed
Fixes/Changes from 77.02.001 to 78.00.001:
Library Update
- New symbols
- DM(C)F-XX-4K-SFP (for DMCF-RX-4K-SFP, DMCF-TX-4K-SFP, DMF-RMC-4K-SFP, DMF-TX-4K-SFP) - Requires minimum control system firmware version 1.501.0025, firmware version 1.3119.00004 and minimum Simpl Windows version 4.05.00
- Updated
- Crestron App
- DM-TXRX-100-STR
Toolbox
- DM(C)F-XX-4K-SFP
- DMF-CI-8
Fixes/Changes from 77.00.004 to 77.02.001:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.04.034
- Resolved Gather issues introduced starting with 2.04.032 of the include4.dat.
- Resolved Find issues introduced starting with 2.04.032 of the include4.dat.
- BACnet
Fixes/Changes from 76.09.001 to 77.00.004:
Library Update
- New symbols
- CSA-PWS10S-HUB-ENET
- DMB-4K-I-HD-DNT
- DMB-4K-O-HD-DNT
- DSP-860
- DSP-1280
- TS-1542-C
- Updated
- DMB-4K-I-C
- DMB-4K-O-HD
- BACnet
VTPro-e
Toolbox
- TS-1542-C
- CSA-PWS10S-HUB-ENET
- DMB-4K-I-HD-DNT
- DMB-4K-O-HD-DNT
Fixes/Changes from 76.05.002 to 76.09.001:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.04.033
- Resolves issue with FIND functionality.
Fixes/Changes from 76.00.002 to 76.05.002:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.04.032
- SIMPL# Pro
- Update the max number of joins available for fusion to be 25000.
- Resolve the issue with the UsbHidPortClass
- Removed HIDControl/HIDControlFeedback and HIDControlFeedbackEventId
- Added Message/MessageFeedback and MessageFeedbackEventId
- Added Control/ControlFeedback and ControlFeedbackEventId
- Resolved issues with the Tx4KX02 classes
- Resolved issue with not handling the Selective Update request properly.
- Update Autonomics classes for supporting DirectConnectFeedback
- Resolve issues with handling of the page join gating update requests. This was causing delays in parsing packets based on a timing issue.
- Add support for RVI file synchronization with the cloud component.
- Resolve issues with the FL-EXP-SW-CN and GL-EXP-DIMU-CN devices
- Added new PasswordModeAsEnumFeedback property to the BladeSwitch class to be consistent with the PasswordMode property.
- Updated the Tx401 device classes
- Add support for the DSP-XXX devices.
- Resolve issues with devices coming online with outbound fusion connections.
- Simpl #
- Resolve issue with UDPServer.IPAddressLastMessageReceivedFrom. Now this will return String.Empty if no packet has been received.
- Resolve issue with the Nagle not being set correctly on the Client and Server sockets.
- Resolve issue with the Nagle/NumberOfClientsConnected property blocking when a call to accept a connection is active ( Incorrect critical section usage)
- Fixed issue with the HashAlgorith.Dispose method
- Simpl+
- Add support for the Gather Async functionality – Needs Simpl Windows support.
VTPro-e
Toolbox
Fixes/Changes from 75.07.002 to 76.00.002:
Library Update
Fixes/Changes from 75.05.001 to 75.07.002:
Library Update
- Updated
- C2N-LCDB3
- DM-RMC-4K-100-C-1G
- Added support for DM-MD6x4 and DM-MD6x6.
- Note: SIMPL Windows v4.03.24 or later is required to use HDBT support for DM-MD6x4 and DM-MD6x6.
- INCLUDE4.DAT (3 series) version 2.04.027
- SIMPL# Pro
- Updated CEN-NSP1 and ATC-AUDIONET devices.
- Add support for C2N-LCDB3.
- Resolved issues with the DM-TX-2XX devices not firing the proper CEC Stream Change event.
- Resolved issues with the C2NI-CB device.
- Resolved issues with the events not firing for the DMPS3-4K-XXX devices.
- Add support for signed Ramping.
- Add support for SWAMP Doorbell functionality.
- Added support for the following devices:
- CLX-2DIMFLV8
- GLX-DIMFLV8
- GLX-HSW8
- GLXP-DIMFLV8
- GLXP-HSW12
- GLXP-HSW8
- GLXP-SW10
- GLXP-SW16
- GLXX-CTRL
- GLX-2DIM8
- GLX-DIM6
- Update the DM-TX-RX-100-STR device.
- Resolved the issue with the Online State for RF devices hanging off an externat/internal RF gateway.
- Resolved issues with the DM-RMC-4K-SCALER-C and the DM-RMC-4K-SCALER-C-DSP device.
- Resolved issue with the DM-RMC-4K-1G device when adding it to the DM output on a DMPS3.
- Simpl #
- Resolved sandbox validation issues.
- Resolved issues with the Global Data store not being able to share data.
- Added support for Sandboxed version of the NewtonSoft library (SimplSharpNewtonSoft). Please add a reference to the SimplSharpReflectionInterface when using this library.
- Resolved the performance issues with the Simpl Sharp sockets.
- Resolved issues with the WHO command when we have both SIMPL Plus and SIMPL Sharp sockets.
- Add authentication support for HTTPs client proxy.
Fixes/Changes from 75.00.001 to 75.05.001:
Library Update
- Updated
- DM-TX-4K-202-C
- DM-TX-4K-302-C
- DM-RMC-SCALER-C
- DM-RMC-4K-SCALER-S
- DMCI-DMC-4K-C
- DMCI-DMC-4K-C-DSP
- DMCI-DMC-4K-HD
- DM-RMC-150-S
- DM-RMC-200-S
- DM-RMC-SCALER-S
- DM-RMC-200-S2
- DM-RMC-SCALER-S2
- DM-RMC-200-C
- DM-RMC-4K-SCALER-C
- DM-RMC-4K-SCALER-C-DSP
- DM-TX-201-C
- DM-TX-401-C
- DMC-4K-CO-HD
- DMC-4K-C-DSP
- DMC-VID-BNC
- DMC-VID-RCA-A
- DMC-VID-RCA-D
- DMC-4K-HD
- DMC-4K-HD-DSP
- DMC-DVI
Fixes/Changes from 74.05.002 to 75.00.001:
Library Update
Toolbox
Fixes/Changes from 74.00.002 to 74.05.002:
Library Update
Toolbox
Fixes/Changes from 73.05.002 to 74.00.002:
Library Update
- Updated
- Autonomic
- Added support for Media Player Object Router.
- SWAMP
- Added support for doorbell.
- CLW
- Increased the maximum value for the RemoteHoldTime and RemoteDblTapTime device parameters to 2.5 seconds for the CLW-DELVEX-E/P, CLW-DIMEX-E/P, CLW-DIMSWEX-E/P, and CLW-SWEX-E/P.
- Increased the maximum value for the HoldTime and DblTapSpeed device parameters to 2.5 seconds for the INET-CBDEX-E/P.
Fixes/Changes from 73.00.001 to 73.05.002:
Library Update
- New symbols
- Crestron Surface Hub
- DMPS3-4K-100-C
- DMPS3-4k-50
- INCLUDE4.DAT (3 series) version 2.04.024
- A proxy settings class – Currently only supported in HTTPSClient
- Enhancements/Bug fixes for XML support
- Support for XMLNodeList
- Expanded support for XMLNode
- Enhanced support for XMLDocument
- Added XmlDeclaration, XmlComment, XmlAttributeCollection, XmlDocumentFragment, XmlDocumentType, XmlImplementation, XmlQualifiedName,XmlEntityReference, XmlSignificantWhitespace and XmlNodeChangedEventArgs.
- Resolved issues with XElement.Name
- Resolved issue with MemoryStream.CanWrite property
- Resolve issue with the HTTP/HTTP(s) classes not abiding by RFC 7230
- Enhancements/Bugfixes to websockets
- Made it iDisposable
- Added new Async methods for disconnect
- Added new host property ( has a firmware dependency of 1.502.xxxx and higher).
- Modified the port property for the websockets to override what is specified in the URL.
- Onvif issues
- Resolve issue with Discovery – we were missing a namespace which was causing the controller to not detect certain cameras
- New devices under SSP
- CsaPws10sHub
- DM-RMC-100STR
- Added support for the new DMPS3-4K-100-C and DMPS3-4K-50 devices. These are new control systems.
- Added SNMP support under SSP.
- SSP device fixes
- Resolve issue with dispose method in the fusion classes.
- Updated device class for DGE-100
- Resolved issues with the DM-TX-X02 classes
- Added CrestronAppSetupReservedSigs extender for the Crestron App.
- Added setter for HDCPCapability for the EndpointHdmiInput class
- Resolve the issue with the Din8SW8 device w.r.t FullOn/FullOff
- SSP enhancements/fixes
- Resolved issues with link states on the RF devices under an external High power gateway.
- Resolved issues with incorrectly setting the link state of the child devices.
- Resolve issue with not resetting the state of the device, if we get multiple update requests from the device.
- Resolve issues with the timeouts for getting the page join gating event.
- Replaced locks with CCriticalSections for better performance.
- Resolve the issue where SSP was not sending the reserved joins on the update request
Toolbox
- DMPS3-4K-100-C
- DMPS3-4k-50
Fixes/Changes from 72.05.001 to 73.00.001:
Library Update
Toolbox
Fixes/Changes from 72.00.001 to 72.05.001:
Library Update
Toolbox
Fixes/Changes from 71.05.004 to 72.00.001:
Library Update
- Updated
- RMC-4K-SCALER-C
- RMC-4K-SCALER-C-DSP
- INCLUDE4.DAT (3 series) version 2.04.018
- Added support for HD-MD-400/ HD-MD4x1-4K/ HD-MD4x2-4K/ HD-MD6x2-4K devices
- Resolved a timing issue with the Thread.Abort function.
- Resolve issues with the FusionStaticAsset and FusionDynamicAsset unable to add any user defined signals.
Toolbox
Fixes/Changes from 71.00.003 to 71.05.004:
Library Update
- New symbols
- 3-Series FW v1.500.x - USB-HID
- CLC-1LEDPWM-RGBW-EX
- Updated
- HDBT support for DM-RMC's and DM-TX's (stand-alone endpoints).
- Device Model Update for Prodigy
- DMB-4K-O-HD
- HDXSPA
- SWAMP
- HD-MD-400-C-E
- INCLUDE4.DAT (3 series) version 2.04.016
- SIMPL# Pro
- Added support for the DmTx4k202C/DmTx4k302C
- Added support for Smart Objects for DGE-2
- Added support for the DinCenCn2Poe/DinCenCn2
- Added support for ClwiKplcn
- Added support for Ts1542 panel
- Added AutoUpdate extenders for TSX-XX2 and TSR-302 panels
- Added support for TT1xx device under DmTxX02 device.
- Resolved issues with DmRmcScalerS and DmRmcScalerS2 devices
- Resolved issues with USBRoutedToFeedback Sig not being thrown on the 64x64 and 128x128
- Resolve issues with Autonomics MMS devices
- Resolve issues with DmRmc4KScaleCDsp class.
- Updated classes for the DM-TXRX-100-STR and DGE-100
- Resolved issues with GLPP devices
- Modified device ports (ComPort, Versiport, Relay, etc.) on external sharable devices (3 Series Card) use Register/Unregister methods instead Use/UnUse.
- Resolved Issues with DM-MD6xN devices
- Resolved issue with the HD-MD8x1-4K device registration.
- Resolve issues with ramps for certain devices.
- SIMPL#
- Added XmlAttribute / XmlElement / XmlCDataSection and XmlProcessingInstruction classes
- Added ToString() overrides for XDeclaration and XStreamingElement
- Added Secure Remote SysLog server support (RemoteSysLogging)
- Enhanced Onvif support
- Resolve issue with encoding of the XmlWriter
- Resolve issues with SSHClient hanging when executing an invalid command.
Toolbox
Fixes/Changes from 70.05.003 to 71.00.003:
Library Update
- New symbols
- Cresnet Connected:
- C2N-GENERICKEYPAD
- C2N-CONNECTED-CHIP
- DM-TX-4K-202-C
- DM-TX-4K-302-C
- HD-MD-400-C-E (Requires Crestron Database 54.00.000.00 or higher.)
- TS-1542
- Updated
- AM-100
- TS Extender Updates for DGE-100
VTPro-e
Toolbox
- Added support for:
- TS-1542
- Cresnet Connected
Fixes/Changes from 70.00.004 to 70.05.003:
Library Update
- Updated
- SWAMP
- Crestron App
- VOIP Device Extender Update
- New notifications center widget subslot
VTPro-e
- Crestron App
- VOIP Device Extender Update
Toolbox
- Added support for: DM-TXRX-100-STR
- Added Dimmer setting support to CLX-2DIMU8
Fixes/Changes from 69.05.001 to 70.00.004:
Library Update
- Updated
- DMC-4K-HD
- DMC-4K-HD-DSP
- DMC-4K-C
- DMC-4K-C-DSP
- DMCI-DMC-4K-HD
- DMCI-DMC-4K-HD-DSP
- DMCI-DMC-4K-C
- DMCI-DMC-4K-C-DSP
- CCS-UC-CODEC-100 Device Extender
- Updates for the Lync Meeting Room and System4 Device Extenders.
- Update for Audio device extender.
- CCS-UC-CODEC-200 Device Extender
- Updates for the Lync Meeting Room and System4 Device Extenders.
- Update for Audio device extender.
- Added Touch Detection Device Extender Support for the following Panels:
- TSW-752
- TSW-732
- TSW-552
- TSW-1052
- TST-602
- TSS-752
- TSR-302
- TST-902
VTPro-e
- CCS-UC-CODEC-100
- CCS-UC-CODEC-200
Fixes/Changes from 69.00.002 to 69.05.001:
Library Update
- New symbols
- Broadcast Commands for Shades-Cresnet
- Updated
- INCLUDE4.DAT (3 series) version 2.03.012
- Resolved issues with scheduling non-recursive events with the same name in the callback routine.
- Resolved issues with the program status event handler not firing for Program Stopping event
VTPro-e
- Added Auto Update Extender Support for the following Panels:
- TSW-752
- TSW-732
- TSW-552
- TSW-1052
- TST-602
- TSS-752
- TSR-302
- TST-902
Fixes/Changes from 68.07.002 to 69.00.002:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.03.011
- Fusion SP2 - Fusion Occupancy Sensor Symbol Update
Fixes/Changes from 68.05.001 to 68.07.002:
Library Update
- Updated
- TSCW-730
- HDBT Support for DMPS3-200/300
- Added Auto Update Extender Support for the following Panels:
- TSW-752
- TSW-732
- TSW-552
- TSW-1052
- TST-602
- TSS-752
- TSR-302
- TST-902
VTPro-e
- Added XPanel 2.0 Smart Graphics Video Support
Fixes/Changes from 68.00.002 to 68.05.001:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.03.010
- Simpl# Pro help file (SIMPLSharpPro.chm) can be found at C:\Program Files (x86)\Crestron\Cresdb\Help
Fixes/Changes from 67.07.003 to 68.00.002:
Library Update
- New symbols
- CSM-QMTDC-DRP-3-CN
- CSM-QMTDC-DRP-3-EX
- Updated
- DMC-STRO
- DMC-STR
- DMCI-DMC-STR
Toolbox
- Added support for:
- DIN-DALI-2
- CSM-QMTDC-250-4-EX
- CSM-QMTDC-250-4-CN
- CSM-QMTDC-DRP-3-CN
- CSM-QMTDC-DRP-3-EX
Fixes/Changes from 67.05.001 to 67.07.003:
Library Update
- Updated
- Added HDBT support to the following devices:
- DMPS3-4K-150-C
- DM-MD8x1-4K-C
- Added Scaler Out Standby Timeout to the following devices:
- DMPS3-4K-150-C
- DM-MD8x1-4K-C
- HD-MD8x1-4K
- Added symbol support for the DM-TX-4K-100-C-1G and DM-RMC-4K-100-C-1G for use with the DMPS3-4K-150-C and DM-MD8X1-4K-C presentation systems.
Fixes/Changes from 67.00.001 to 67.05.001:
Library Update
- Updated
- Andriod Panels (TSR-302, TSS-752, TST-602, TST-902, TSW-552, TSW-732, TSW-752 and TSW-1052): Added the following support:
- Authentication Device Extender
- Auto-answer (RAVA) joins
- Auto-update Extender
Toolbox
VTPro-e
- Andriod Panels (TSR-302, TSS-752, TST-602, TST-902, TSW-552, TSW-732, TSW-752 and TSW-1052): Added the following support:
- Authentication Device Extender
- Auto-answer (RAVA) joins
- Auto-update Extender
Fixes/Changes from 66.05.002 to 67.00.001:
Library Update
- Updated
- INCLUDE4.DAT (3 series) version 2.02.046.
Toolbox
Fixes/Changes from 66.02.001 to 66.05.002:
Library Update
- New symbols
- DGE-100
- DM-RMC-4K-100-C-1G: Symbol
- DM-TX-4K-100-C-1G: Symbol
- Updated
- Added HDBT support to the following DM Cards:
- DMC-C
- DMC-C-DSP
- DMC-4K-C
- DMC-4K-C-DSP
- DMC-CO-HD
- DMC-4K-CO-HD
- HD-MD8x1-4K
VTPRO-e
- DGE- 100 This requires VTPro-e version 5.9.05.04 and higher.
Toolbox
- Added support for:
- DM-RMC-4K-100-C-1G
- DM-TX-4K-100-C-1G
- DGE-100
Fixes/Changes from 66.00.004 to 66.02.001:
Library Update
- Updated
- DMC-4K-C
- DMC-4K-HD
- DMC-4K-C-DSP
- DMC-4K-HD-DSP
- DMC-C
- DMC-C-DSP
- DMC-HD
- DMC-HD-DSP
- DMC-S
- DMC-S-DSP
- DMC-S2
- DMC-S2-DSP
- DMC-DVI
Fixes/Changes from 65.05.003 to 66.00.004:
Library Update
- New symbols
- CSM-QMTDC-163-1-EX
- CSM-QMTDC-250-2-CN
- CSM-QMTDC-250-2-EX
- Updated
- CSM-QMTDC-163-1-CN
- CSM-QMTDC-256-2-CN
- CSM-QMTDC-256-2-EX
- DM-RMC-4K-SCALER-C
- DM-RMC-4K-SCALER-C-DSP
- GL-EXP-DIM-CN
- GL-EXP-DIMFDB-CN
- GL-EXP-DIMFLV-CN
- GL-EXP-DIMU-CN
- GL-EXP-SW-CN
Toolbox
- CSM-QMTDC-163-1-EX
- CSM-QMTDC-250-2-CN
- CSM-QMTDC-250-2-EX
- GL-EXP-DIM-CN
- GL-EXP-DIM-DALI
- GL-EXP-DIMFDB-CN
- GL-EXP-DIMFDB-DALI
- GL-EXP-DIMFLV-CN
- GL-EXP-DIMFLV-DALI
- GL-EXP-DIMU-CN
- GL-EXP-DIMU-DALI
- GL-EXP-SW-CN
- GL-EXP-SW-DALI
Fixes/Changes from 65.00.002 to 65.05.003:
Library Update
- New symbols
- HD-MD4x1-4K-E
- HD-MD4x2-4K-E
- HD-MD6x2-4K-E
- Autonomics
- Updated
- 2-Series Smart Graphics Support
- Updated the Compiler Environment for various 2-series controllers that were not marked for Smart Graphics support. Controllers with the update:
- PAC2M
- MP2/MP2E
- MC2W/MC2E
- QM-RMCRX(-BA)
- AES/AMS/AMS-AIP
- AADS(-XM)
- MPS-100/MPS-200/MPS-250/MPS-300
- DIN-AP2
- MPC-M5/MPC-M10/MPC-M20/MPC-M25/MPC-M50
- IPAC
- DMPS-200/DMPS-300
Fixes/Changes from 64.07.003 to 65.00.002:
Library Update
- New symbols
- DMPS3-300-C-AEC
- HTT-B10EX
- Combined ER-EX Gateway [Added support to the following touchscreens: TST-600, TST-602, TST-902, TSR-302]
Toolbox
- Added support for HTT-B10EX
Engraver
- Added support for HTT-B10EX
Fixes/Changes from 64.05.002 to 64.07.003:
Library Update
- Updated
- Apple Watch support for Crestron App
- INCLUDE4.DAT (3 series) version 2.02.045.
- a. Issues Resolved
- i. Added AllowOtherAppsToRun() to CrestronEnvironment namespace
- ii. Resolved issues with HTTP(s) streaming
- iii. Enhanced CrestronXMLSerialization class
- iv. Resolved issues with SFTP class
- v. Resolved issues with recurrence in the event scheduler.
- vi. Resolved issues with TCP Server/Client in Simpl#.
- vii. Resolved issues with CrestronAuthentication class in SIMPL#
- viii. Resolved issue with nested gather function calls in Simpl+.
- b. New features
- i. Added Crestron.SimplSharp.Reflection Namespace. This requires firmware version 1.011.0023 and higher
- ii. Added EthernetAdapter property to SSHClient and Websockets.
- iii. Support for list of connected IP address(s) in SIMPL# and SIMPL# Pro. This requires firmware version 1.011.0023 and higher.
- iv. Added CrestronCresnetHelper class in SIMPL#. This requires firmware version 1.011.0023 and higher.
- v. Added Authenticated Email support in SIMPL#. This requires firmware version 1.011.0023 and higher.
- c. New Device Classes in Simpl# PRO
- i. Added Samsung smart TV to Crestron Connected devices.
- ii. HR100 and HR150 devices
- iii. DGE1 and DGE2 devices
- iv. TPMC-V12, TPMC-V15, TPMC-V17 devices
- v. DMPS3-200, DMPS3-300 support
- vi. DIN-DALI2 support
- vii. Single Card DM Output Modules
- viii. C2N-RTHS support
- ix. CCS-UC-CODEC-200 support
- x. TSR-302 support
- xi. TST-602 support
- xii. C2N-AMP-6x100 support
- xiii. CN2-AMP-4x100 support. There is a known issue with this device class in Simpl# Pro.
- xiv. Autonomics MMS2 and MMS5a support.
- xv. VPG-12, VPG-15 and VPG-24 support.
Engraver
- Added HR-100/150 SystemBuilder™ support. (Requires Crestron Database 50.05.004.00 or higher.)
Fixes/Changes from 64.00.002 to 64.05.002:
Library Update
- Updated
- Apple Watch support for Crestron App (Apple Watch application will be available for download from Apple within 7-10 days of this database release)
VTPRO-e
Toolbox
Engraver
Fixes/Changes from 63.07.001 to 64.00.002:
Library Update
- New symbols
- DM-MD8X1-4K-C
- HD-MD8X1-4K
- Updated
- HDXSP-A
- DMNet TX-401-S/S2
Toolbox
- DM-MD8X1-4K-C
- HD-MD8X1-4K
- Updated support for DMC-STR
Fixes/Changes from 63.05.006 to 63.07.001:
Toolbox
- Updated support for SWAMP
Fixes/Changes from 63.00.002 to 63.05.006:
Library Update
- New symbols
- DM-RMC-4K-SCALER-C-DSP
- GLS-PART-CN
- TST-902
- Updated
- DMNet model for DM-RMC-4K-SCALER-C
- XPanel Simulator Support
- DMC-STRO
VTPRO-e
Toolbox
- DM-RMC-4K-SCALER-C-DSP
- GLS-PART-CN
- TST-902
- SWAMP
Fixes/Changes from 62.07.001 to 63.00.002:
Library Update
- Updated
- AudioNet
- CEN-NSP1
- FT-TS600
- TST-600
- TST-602
- TSW-1050
- TSW-1052
- TSW-550
- TSW-730
- TSW-750
- TSW-552
- TSW-752
- TSR-302
- TSS-752
VTPRO-e
- Added support for keyclicks to the following touchscreens:
- FT-TS600
- TST-600
- TST-602
- TSW-1050
- TSW-1052
- TSW-550
- TSW-730
- TSW-750
- TSW-552
- TSW-752
- TSR-302
- TSS-752
Fixes/Changes 62.05.003 to 62.07.001:
Toolbox
Fixes/Changes from 62.01.001 to 62.05.003:
Library Update
- Updated symbols
- DM-RMC-200-C
- DM-RMC-200-S2
- DM-RMC-200-S
- DM-RMC-SCALER-C
- DM-RMC-SCALER-S2
- DM-RMC-SCALER-S
- DMPS3-4K-150-C
- HDXSPA
- DM endpoint for HDXSPA
- Crestron App
Engraver
- Support for new symbol fonts has been temporarily removed.
Fixes/Changes from 62.00.005 to 62.01.001:
Library Update
- New symbols
- Home Connect DL-01/Baldwin Locks
Toolbox
- Home Connect DL-01/Baldwin Locks
- CLX-1DIMU4 (Requires Toolbox version 2.38.747 or later)
- CLX-2DIMU8 (Requires Toolbox version 2.38.747 or later)
Fixes/Changes from 61.05.004 to 62.00.005:
Library Update
- New symbols
- CCS-UC-CODEC-200 (Crestron RL System)
- CLWI-DIMUNEX
- CSM-QMTDC-163-1-CN
- PP-100-W
- TST-602
- CLX-1DIMU4
- CLX-2DIMU8
Toolbox
- CCS-UC-CODEC-200 (Crestron RL System)
- CLWI-DIMUNEX
- CSM-QMTDC-163-1-CN
- TST-602
- CLX-1DIMU4 (Requires Toolbox version 2.38.747 or later)
- CLX-2DIMU8 (Requires Toolbox version 2.38.747 or later)
VTPRO-e
Engraver
Fixes/Changes from 61.00.002 to 61.05.004:
Library Update
- New symbols
- DM-RMC-4K-SCALER-C
- DMC-4K-C
- DMC-4K-C-DSP
Toolbox
Engraver
- Added Engraver HR-BTN support for
Fixes/Changes from 60.05.003 to 61.00.002:
Library Update
- Updated symbols
- C2N-AMP-6X100
- DMC-STR
- DMCI-DMC-STR
VTPRO-e
- Change TSR-302 description field to say " 3” Wireless Touch Screen Remote”.
Fixes/Changes from 60.02.001 to 60.05.003:
Library Update
- New symbols
- CLFI-LDIMUEX-230
- DMC-STR
- DMCI-DMC-STR
- HR-100
- HR-150
- C2N-AMP-6X100
- Updated symbols
- Added “Door Release” and “Preview” VOIP Extender joins in support of BPT door station systems on TSW-552/752/1052, TSS-752, and TSR-302 touch screen products. Requires TSX-XXX2 firmware 1.000.0053 or later.
- Changed “Ping VR Server fb” Voice Control Extender join to be named “Voice Recognition Service Online fb” on TSW-552/752/1052, TSS-752, and TSR-302 touch screen products.
- Updated the following single output cards:
- DMC-HDO
- DMC-SO
- DMC-CO
- DMC-S2O
- DMC-STRO
- DMC-4K-CO-HD
- DMC-4K-SO
Toolbox
- CLFI-LDIMUEX-230
- HR-100
- HR-150
- TPMC-V12 – Added support for PUF based firmware updates.
- TPMC-V15 – Added support for PUF based firmware updates.
- C2N-AMP-6X100
VTPRO-e
- Added “Door Release” and “Preview” reserved joins in support of BPT door station systems on TSW-552/752/1052, TSS-752, and TSR-302 touch screen products. Requires TSX-XXX2 firmware 1.000.0053 or later.
- Changed “Ping VR Server fb” reserved join to be named “Voice Recognition Service Online fb” on TSW-552/752/1052, TSS-752, and TSR-302 touch screen products.
Fixes/Changes from 60.00.001 to 60.02.001:
Library Update
- Updated symbols
- INCLUDE4.DAT (3 series) version 2.02.028: Resolve issues with running the programs from the Removable Media.
Fixes/Changes from 59.07.001 to 60.00.001:
Library Update
- Updated symbols
- INCLUDE4.DAT (3 series) version 2.02.025
Fixes/Changes from 59.02.001 to 59.07.001:
Library Update
- Updated symbols
- TSR-302: General symbol update: no user facing changes.
- TSS-752: Added signals for screensaver top and bottom text.
- TST-600: General symbol update: no user facing changes.
- TPMC V12: Expanded Rava VOIP extender functionality.
- TPMC V15: Expanded Rava VOIP extender functionality.
VTPRO-e
- TPMC V12: Expanded Rava VOIP extender functionality.
- TPMC V15: Expanded Rava VOIP extender functionality.
Toolbox
Fixes/Changes from 59.00.001 to 59.02.001:
Library Update
- Updated symbols
- INCLUDE4.DAT (3 series) version 2.02.023: Resolves issue with DM Output cards not functioning under Simpl # PRO
Fixes/Changes from 58.05.002 to 59.00.001:
Library Update
- Updated symbols
- CEN-NSP-1
- INCLUDE4.DAT (3 series) version 2.02.019
Toolbox
VTPRO-e
Fixes/Changes from 58.02.001 to 58.05.002:
Library Update
- New symbols
- DMCI-DMC-4K-HD
- DMCI-DMC-4K-HD-DSP
- Updated symbols
- Fusion EM
- CLW-LDIMEX / LSWEX - Digital Output signal "Load_Attached" has been removed from symbol. (Requires Crestron Database 47.00.003.)
- Enabled Web Browser Kiosk Mode Reserved Joins/Extenders for the following Touchscreen Panels
Toolbox
Fixes/Changes from 58.00.003 to 58.02.001:
Library Update
- Updated symbols
- INCLUDE4.DAT (3 series) version 2.01.044
Fixes/Changes from 57.07.002 to 58.00.003:
Library Update
- New symbols
- CSM-QMTDC-256-2-EX
- TSCW-730
- Updated symbols
- MLX-3: Corrects issue with serial strings sometimes not displaying for 2-series control systems.
VTPRO-e
Toolbox
Fixes/Changes from 57.07.001 to 57.07.002:
- Resolved issue from Device Database 57.07.001 whereby Toolbox was not working properly with DMPS-300-C.
Fixes/Changes from 57.05.001 to 57.07.001:
Library Update
- Updated symbols
- INCLUDE4.DAT (3 series) version 2.01.043
Toolbox
- Added support for:
- DGE-2
- Crestron App for Andriod
Fixes/Changes from 57.00.001 to 57.05.001:
Library Update
- Updated symbols
- DIN-DALI-2
- DM Output Cards
VTPRO-e
- Added H.264 support to Embedded Video Object for Crestron App projects. H.264 video requires Crestron App for iOS version 1.03.35 or later.
Toolbox
- Added support for: CLWI-KPLEX-BATT
Fixes/Changes from 56.07.001 to 57.00.001:
Library Update
- Updated symbols
- HD Scaler
- CCS-UC-CODEC-100 (Crestron RL System)
VTPRO-e
- Added support for:
- FT-TSC600
- CCS-UC-CODEC-100 (Crestron RL System)
Toolbox
- Added support for:
- CCS-UC-CODEC-100 (Crestron RL System)
Fixes/Changes from 56.05.003 to 56.07.001:
Library Update
Toolbox
- Added support for CEN-NSP-1
Fixes/Changes from 56.02.003 to 56.05.003:
Library Update
- Updated symbols
- HD Scaler
- MLX-3
- CLX
- Updated packed signals for:
Fixes/Changes from 56.00.004 to 56.02.003:
Library Update
VTPRO-e
- Added Crestron App support for Android devices. Custom option in Devices dropdown will be available with the VTPro-e 5.4.25 release in the near future. Until then, the Custom option will be visible, but will not function in the current VTPro-e 5.4.17.02 release.
Toolbox
Fixes/Changes from 55.05.004 to 56.00.004:
Library Update
- Updated symbols
- INCLUDE4.DAT (3 series) version 2.01.039
- AM-100: Ethernet Offline Manager
VTPRO-e
- Added Control Systems Offline (18495) and All Control Systems Online (18494) joins to the following panels.
Fixes/Changes from 55.00.002 to 55.05.004:
Library Update
- New symbols
- DM-RMC-100-C-DMNet
- DM-RMC-200-C-DMNet
- DM-RMC-4K-100-C
- DM-RMC-4K-100-C-DMNet
- DM-RMC-Scaler-C-DMNet
- DMB-4K-I-HD
- DMB-4K-O-C
- DMC-4K-CO
- DMC-4K-HD
- DMC-4K-HD-DSP
- DMCO-80
- DMCO-83
- DMCO-88
- Updated symbols
- Capture HD
- DM-MD 128x128
- DM-MD 64x64
Fixes/Changes from 54.05.004 to 55.00.002:
Library Update
- New symbols
- CSM-QMTDC-256-2-CN
- Requires Crestron Database 44.05.005
- Requires Toolbox version 2.36.814 or later
- Updated symbols
- INCLUDE4.DAT (3 series) version 2.01.037: Added initial SIMPL# Pro Device Classes (firmware 1.009.0029 or above)
Engraver
- Added engraveable areas for HTT-B2EX-BATT Panel
- Requires Crestron Database 44.05.005
Fixes/Changes from 54.00.003 to 54.05.004:
Library Update
- New symbols
- Crestron Connected AVR (Denon)
- Updated symbols
- DM-TX-201-C
- DM-TX-201-C-2G
- DM-TX-401-C
- DM-TX-401-S
- DM-TX-401-S2
- RMC-200-C
- RMC-200-S
- RMC-200-S2
- RMC-SCALER-C
- RMC-SCALER-S
- RMC-SCALER-S2
VTPRO-e
- Added Control Systems Offline (18495) and All Control Systems Online (18494) joins to the following panels.
- TSW-550
- TSW-730
- TSW-750
- TSW-1050
- TST-600
Fixes/Changes from 53.05.004 to 54.00.003:
Library Update
- Updated symbols
- TSX VOIP Extender w/Dial Buffer Serial Update
- QM-RMC - Updated compiler environment to support Smart Graphics
VTPRO-e
Fixes/Changes from 53.00.003 to 53.05.004:
Library Update
- Updated symbols
- Din-Dali
- TPMC-V12 - System2 Device Extender Update. (Added Rava/VOIP Push-to-Talk Support)
- TPMC-V15 - System2 Device Extender Update. (Added Rava/VOIP Push-to-Talk Support)
Toolbox
Fixes/Changes from 52.05.003 to 53.00.003:
Library Update
Toolbox
Fixes/Changes from 52.00.007 to 52.05.003:
Library Update
- New symbols
- Din-DALI-2
- CEN-ERFGW-POE (Shareable Ethernet gateway -ER)
- Updated symbols
- Capture-HD
- Capture-HD PRO
Fixes/Changes from 51.07.005 to 52.00.007:
Library Update
- New symbol
- CEN-RFGW-EX
- FT-TS600
- GLS-OIR-C-CN
- 3-Series TCP/IP Ethernet Intersystem Communications
- Updated symbols
- BACnet
- TPMC-4SM-FD - Expanded Rava VOIP extender functionality to match TSX touch screens.
- TPMC-4SMD-FD - Expanded Rava VOIP extender functionality to match TSX touch screens.
- TPMC-9L - Expanded Rava VOIP extender functionality to match TSX touch screens.
- TPS5000/6000
- INCLUDE4.DAT (3 series) version 2.01.014
- Added MIC Master Fader Control and Output Clip Meter Feedback to the following DMPS models: (Crestron Database 41.05.005 is required)
- DMPS-100-C
- DMPS-200-C
- DMPS-300-C
- DMPS-300-AEC
VTPRO-e
Toolbox
Fixes/Changes from 51.05.005 to 51.07.005:
Library Update
VTPRO-e
- Updated panels name from Core3UI to Smart Graphics
- Updated TPCS-4SM and TPCS-4SMD in VTPro-e to disallow the addition of video window objects, which are not a supported feature.
- Corrected incorrect sound capability reporting that would cause TSW touch screen projects to be stripped of included sound files after a Save As.
Toolbox
- Text Console support for DM-MD128x128
Fixes/Changes from 51.05.005 to 51.06.004:
Library Update
- Updated symbols
- INCLUDE4.DAT 1.80 (2 Series) - Fixed the return code to the WriteStringArray function to correctly return the number of bytes written.
Fixes/Changes from 51.01.001 to 51.05.005:
Library Update
- New symbol
- DIN-AP3
- DIN-AP3MEX
- DM-MD 128x128
Fixes/Changes from 51.00.003 to 51.01.001:
VTPRO-e
- Added Support for CCS-UC-CODEC-100 (Crestron RL System)
Fixes/Changes from 50.06.002 to 51.00.003:
Library Update
- New symbol
- CLWI-KPLCN
- TSW-730
- INET-IOEX-RYIO
- INET-IOEX-IRCOM
- DMC-STRO
- Updated symbols
- Added support for CEN-CI3-1 and CEN-CI3-3 on TPCS-4SM
- Added support for AV_mute and online/offline status to Roomview Connected Display
VTPRO-e
Toolbox
- Added support for TPMC-9/TPMC-9L eboot/updater as a part of firmware/PUF upgrades..
Engraver
- TSW-730
- CLWI-KPLEX-BATT – Added missing layouts (supports same layouts as CLWI-KPLEX)
Fixes/Changes from 50.05.004 to 50.06.002:
Library Update
- New symbol
- CCS-UC-CODEC-100 (Crestron RL System)
Fixes/Changes from 50.00.006 to 50.05.004:
Library Update
- New symbol
- AM-100
- GLPP-1DIMFLV3EX-PM
- GLPP-1DIMFLV2EX-PM
- GLPP-DIMFLVEX-PM
- GLPP-1SW3EX
- GLPP-1SW2EX
- GLPP-SWEX
- GLS-ODT-C-CN
- HTT-B2EX-BATT
- Samsung Smart TV
- Updated symbols
- UFO-WPR-3ER
- DM-MD64x64:For improved compatibility, the DM-MD64x64 input and output slots have been updated. This allows direct replacement of a DM-MD64x64 with a DM-MD128x128 (or any future device using this technology.) Existing programs will continue to function normally but will show the old names. To update your program please use the “replace device” function in the “configuration view” of Crestron SIMPL.
VTPRO-e
- Support for TPMC-9: Changes to Max Project Size
Toolbox
- Added support for
- GLA-EXPEX - GLPP-1DIMFLV2EX-PM - GLPP-1DIMFLV3EX-PM - GLPP-1SW2EX
- GLPP-1SW3EX
- GLPP-DIMFLVEX-PM
- GLPP-SWEX
- Added support for HTT-B2EX-BATT
- Updates for 3-Series cards to prevent an issue with indirect FW loads.
Engraver
- Added support for GLPPA keypads when used with infiNET EX versions of the GLPP.
Fixes/Changes from 50.00.004 to 50.00.006:
VTPRO-e
- Updated Crestron App project resolutions.
Fixes/Changes from 49.05.005 to 50.00.004:
Library Update
- Updated symbols
- BACnet
- INCLUDE4.DAT 2.00.010
- 3 Series Controller - add support for program staggering
Fixes/Changes from 49.05.004 to 49.05.005:
- Fixed Page Grouping for MTX-3/TPMC-3X
Fixes/Changes from 48.05.005 to 49.05.004:
Library Update
- New symbol
- Crestron App
- HD-XSP
- Autonomics MMS-5A
- Autonomics MMS-2
- Updated symbols
- C2N-IO
- Ethernet Intersystem Communications (Packed)
- Changed Label from SwitchDelayedOffTime to DelayedOffTime for:
- CLW-SWEX-230-E
- CLW-SWEX-230-P
- CLW-SWEX-277-p
- Changed PTT Mode from a feedback only to a input/output signal for:
- TST-600
- TSW-550
- TSW-750
- TSW-1050
VTPRO-e
- Crestron App
- Support for TPS4 - Option to select Subpage z-order is now avaiable.
- Rackname changes for Core 3 panels
Engraver
- TST-600 - Fixed issue with panel not appearing in dropdown menu
Fixes/Changes from 48.05.004 to 48.05.005:
Library Update
Fixes/Changes from 48.05.004 to 49.00.003:
Library Update
- Updated symbols
- TST-600 symbol: Programs must be recompiled to take effect. Requires TST-600 firmware 1.006.0032 or later.
- Enabled Remote Ethernet Processing for:
- CP3
- CP3N
- TPCS-4SM
- TPCS-4SMD
- INCLUDE4.DAT 1.14.17
- This is required for SIMPL Windows Version 4.02.08 and 3 Series Firmware 1.005.0015 or later.
VTPRO-e
- DVPHD support: Added HDMI Video Input Source option to Project Properties.
Toolbox
- Support for C2N-IO Firmware Upgrade.
Fixes/Changes from 48.00.002 to 48.05.004:
Library Update
- New symbols
- DMPS-300-C-AEC
- Requires Crestron Database 37.05.005.
- CSM-QMT50-DCEX
- Updated symbols
- TST-600 symbol: Programs must be recompiled to take effect. Requires TST-600 firmware 1.006.0032 or later.
- Enabled Remote Ethernet Processing for:
- CP3
- CP3N
- TPCS-4SM
- TPCS-4SMD
- INCLUDE4.DAT 1.14.17
- This is required for SIMPL Windows Version 4.02.08 and 3 Series Firmware 1.005.0015 or later.
VTPRO-e
- DVPHD support: Added HDMI Video Input Source option to Project Properties.
Toolbox
- Support for C2N-IO Firmware Upgrade.
Fixes/Changes from 47.05.005 to 48.00.002:
Library Update
- New symbols
- DM-MD64x64
- Input blades:
- Output blades:
- TSW-550
- CLW-SWEX-230-E
- CLW-SWEX-230-P
- CLW-SWEX-277-P
- Updated symbols
- Capture-HD
- Capture-HD Pro
- CLW-DIMEX-E
- CLW-DIMEX-P
- CLW-DIMSWEX-E
- CLW-DIMSWEX-P
- CLW-SWEX-E
- CLW-SWEX-P
VTPRO-e
- Updated support
- TPMC-9L
- TPMC-4SM-FD
- TPMC-4SMD-FD
Fixes/Changes from 47.01.001 to 47.05.005:
- Corrected button press joins when using the rocker layout from D3Pro. It requires Crestron Database 36.05.015.
Library Update
- New symbols
- CLW-DELVEX-E
- CLW-DELVEX-P
- CLWI-DIMUEX
- CLWI-DIMFLVEX
- CLWI-KPLEX
- CLWI-1SW2EX
- CLWI-SWEX
- PRO3 - minimum FW version required is 1.006.0023
- TST-600
- TSW-1050
- ATC-AudioNet (New model for Core 3 Media Player Support. Requires Crestron Database 36.05.015)
- Updated symbols
- Expanded Rava support on TSW-750 VOIP Device Extender. Added programmatic keypad, answer/hang up, group to dial, and other features.
- Include4.dat version 2.09.17- This is required for Pro3/AV3/CP3N.
Engraver
- TST-600
- CLW-DELVEX-E
- CLW-DELVEX-P
VTPRO-e
- TST-600
- TSW-1050
- TSW-750 - Added Rava reserved joins for Redial and Page All
Toolbox
Fixes/Changes from 47.00.005 to 47.01.001:
Library Update
Fixes/Changes from 46.05.007 to 47.00.005:
Library Update
- New symbols
- AV3
- CEN-SWPOE-16
- CP3N
- DM-TX-201-S2
- DM-TX-401-S2
- TPCS-4SM SystemBuilder model
- TPCS-4SMD SystemBuilder model
- Updated symbols
- CSC-ACCN
- CSC-DCCN
- CSC-DRPCN
- CSC-ACEX
- CSC-DCEX
- CSC-DRPEX
- CSM-QMT50-DCCN
Engraver
Fixes/Changes from 46.00.002 to 46.05.007:
Library Update
- New symbols
- DMCI-DMC-VGA
- DM-RMC-200-S2
- ADMS new model for the device
- Yale Lock
- Updated symbols
- GLPP-1DIMFLV3CN-PM
- GLPP-1DIMFLV2CN-PM
- GLPP-DIMFLVCN-PM
- GLPP-1SW3CN
- GLPP-1SW2CN
- GLPP-SWCN
- ADMS-G2
- C2N-TAMFMXM
- CEN-TRACK tuner cards
- CEN-TRACK-AMFM2
- CEN-TRACK-AMFMSR
- CEN-TRACK-AMFMXM
Fixes/Changes from 45.05.005 to 46.00.002:
Library Update
- New symbols
- DMPS-300-C: supports Core 3 touch screens and smart objects. The new symbol requires Crestron Database 34.05.005 or later, which bring compile time improvements to DMPS-300-C.
- Updated symbols
- C2N-CBD-P-KP-On-Off
- DMPS-100-C: supports Core 3 touch screens and smart objects
- DMPS-200-C: supports Core 3 touch screens and smart objects
Engraver
- C2N-CBD-P-KP-On-Off
- C2N-CBD-P-KP-Scene
Fixes/Changes from 45.00.019 to 45.05.005:
Library Update
- New symbols
- CEN-IDOCV (new model for Core 3 Media Player Support)
- CEN-IDOCV-DSW (new model for Core 3 Media Player Support)
- CEN-ISERVER (new model for Core 3 Media Player Support)
- TPMC-9L VOIP extender, support for RAVA
- C2N-CBD-P-KP-On-Off
- C2N-CBD-P-KP-SCENE
- Updated symbols
- TPMC-9L
- P-DIMRF (for 3 Series)
- P-SWRF (for 3 Series)
- INCLUDE4.DAT Version 1.14.011
- TPMC-4SM-FD: Rava Device Extender
- TPMC-4SMD-FD: Rava Device Extender
VTPRO-e
- TPMC-4SM-FD Updated Rava reserved joins
- TPMC-4SMD-FD Updated Rava reserved joins
Toolbox
Fixes/Changes from 44.06.001 to Latest:
Library Update
- New symbols
- DMPS-100-C
- DM-RMC-SCALER-S2
- Crestron Mobile new model (replacing the old one).
- Updated symbols
- DMC-S2O now allows adding DM-RMC-SCALER-S2 to it.
VTPRO-e
- Added support for Crestron Mobile new model.
- Added RAVA support for TPMC-9L (requires firmware 2.11.0026 or greater and VTPRo-e 5.1.04.01 or greater).
- Memory calculation updated for the following touch screens:
- DGE-1
- DGE-2
- TPMC-12
- TPMC-8X
- TPMC-8L
- TPMC-8X-GA
- TPMC-V12
- TPMC-V15
- Added support for PMC3 with 3-Series OSD.
- Increased maximum allowable DGE-2 project size from 200MB to 240MB.
Engraver
- Released support for DMPS-100-C
Fixes/Changes from 44.05.002 to Latest:
Library Update
- INCLUDE4.DAT updated to support the latest firmware updates. All 3-Series users have to upgrade to firmware version 1.5.7 or later.
Toolbox
- Fixed video resolution feedback issue for DMPS Tool.
Fixes/Changes from 44.00.005 to Latest:
Library Update
- New symbols
- CEN-ERFGW-POE
- CSM-QMT50-DCCN
- CSC-ACCN
- CSC-DCCN
- CSC-DRPCN
- CSC-ACEX
- CSC-DCEX
- CSC-DRPEX
- Updated symbols
- DM devices fixed to be available on the Ethernet port of the TPCS control systems:
- DM-RMC-SCALER-C
- DM-RMC-SCALER-S
- DM-TX-200-C-2G
- ESI Shade Control moved to Third Party Devices in SIMPL Windows device tree
- TPMC-8X-GA VOIP extender added
VTPRO-e
- Added Rava support for TPMC-8X-GA
- Added Aspect Ratio support for DGE-1 and DGE-2. Requires DGE-1 firmware 1.00.02.256(or later) or DGE-2 firmware 1.00.03.342(or later).
- Added H.264 support for TPMC-9L
Fixes/Changes from 43.05.006 to Latest:
Library Update
- New symbols
- BACnet
- DMC-VGA
- DMPS-200-C
- DM-TX-401-S
- Updated symbols
- CP3 control system - added BACnet support
- MC3 control system - added BACnet support
- MC3 RFGW-EX gateway fixed extender set
- PMC3 control system - added BACnet support
- PMC3 and PMC3-XP RFGW-EX gateway fixed extender set
- PMC3-XP control system - added BACnet support
- TPCS-4SM Display
- TPMC-V12 System Reserved Joins fixed
- TPMC-V15 System Reserved Joins fixed
VTPRO-e
- Added dynamic list pointer support.
- Various layout corrections.
NOTE: Pages must be recreated in VTPro-e after installing the Device Database to see changes.
Fixes/Changes from 43.00.003 to Latest:
Library Update
- New symbols
- ADMS-G2
- Axxess GRM
- Bartech Minibar
- ESI Shade Control
- Saflock Doorlock
- SWE-8
- TPCS-4SM
- TPCS-4SMD
- Updated symbols
- DM-RMC-200-C
- DM-RMC-200-S
- DM-RMC-SCALER-C
- DM-RMC-SCALER-S
- MC3 Remote Ethernet Processing
VTPRO-e
- Added support for:
- Added H.264 support for non-Core 3 UI panels.
- Note: TPMC-9L, TPMC-4SM-FD, and TPMC-4SMD-FD Firmware 2.11.026 or later is required to use with this Device Database.
Engraver
- Added support for:
- DMPS-200-C
- SWE-8
- TPCS-4SM
- TPCS-4SMD
Fixes/Changes from 43.00.002 to Latest:
Note: This upgrade resolves a compatibility issue between 2-Series firmware 3.155.xxx and Device Database 41.00.001
Fixes/Changes from 42.06.001 to Latest:
Library Update
- New symbols
- CEN-CI3-1
- CEN-CI3-3
- C3COM-3
- C3IO-16
- C3IR-8
- C3RY-8
- C3RY-16
- TSW-750
VTPRO-e
- Added support for TSW-750.
Fixes/Changes from 42.05.002 to Latest:
Library Update
- Updated symbols
- MLX-3 has a new reserved joins extender (Battery)
- PLX3 has a new reserved joins extender (Battery)
Fixes/Changes from 42.00.002 to Latest:
Library Update
- Updated symbols
- CAPTURE-HD System has been fixed to match CAPTURE-HD-PRO System symbol definition.
VTPRO-e
- Added horizontal list support for Crestron Mobile.
Fixes/Changes from 41.05.005 to Latest:
Library Update
- Updated symbols
- ADMS has been renamed.
- CAPTURE-HD.
- CAPTURE-HD-PRO.
Fixes/Changes from to Latest:
Library Update
- New symbols
- DMPS new device model
- GLS-EM-MCU
- Updated symbols
- DM-MD8x8
- DM-MD16x16
- DM-MD32x32
Note: Crestron Database 31.00.004 or later is required to use with the new model of DMPS-300-C.
Engraver
- Changed Rocker button programmable cues for GLPP
Fixes/Changes from 40.05.010 to Latest:
Library Update
- Updated symbols
- Added support for Core 3 UI to the following control systems:
- PRO2
- AV2
- CP2
- CP2E
- RACK2
- PAC2
- INCLUDE4.DAT updated to support the latest firmware updates.
- INCLUDE4_2SERIES.DAT updated to support the latest firmware updates.
Toolbox
- Device support updated to be equivalent to 2.31.034 Toolbox Release.
Fixes/Changes from 40.01.004 to Latest:
Library Update
- New symbols
- CEN-IDOCV new model replaces the old one
- CEN-IDOCV-DSW new model replaces the old one
- CEN-ISERVER new model replaces the old one
- Updated symbols
- DM-MD8X8
- DM-MD8X8 with RPS
- DM-MD16x16
- DM-MD16x16 with RPS
- DM-MD32x32
- DM-MD32x32 with RPS
- DM-MD6x1
- DM-MD6x4
- DM-MD6x6
- DM-RMC-200-C
- DM-RMC-SCALER-C
- DM-TX-100
- DM-TX-200
- DM-TX-200-2G
- DM-TX-200-C-2G
- DM-TX-201-C
- DM-TX-201-S
- DM-TX-300N
- DM-TX-300NF
- DM-TX-400-3G
- DMC-C
- DMC-C-DSP
- DMC-CAT
- DMC-CAT-DSP
- DMC-DVI
- DMC-F
- DMC-F-DSP
- DMC-HD
- DMC-HD-DSP
- DMC-S
- DMC-S-DSP
- DMCI-DMC-C
- DMCI-DMC-C-DSP
- DMCI-DMC-CAT
- DMCI-DMC-CAT-DSP
- DMCI-DMC-DVI
- DMCI-DMC-F
- DMCI-DMC-F-DSP
- DMCI-DMC-HD
- DMCI-DMC-HD-DSP
- DMCI-DMC-S
- DMCI-DMC-S-DSP
- MC3 - added a new slot for 3-Series SNMP
- PMC3 - added a new slot for 3-Series SNMP
- PMC3-XP - added a new slot for 3-Series SNMP
- UFO-WPR-3ER
VTPRO-e
- UFO-WPR-3ER Updates
- Streaming video and MJPEG support for video window was added for:
- TPMC-V15
- TPMC-V12
- TPMC-8X-GA
- DGE-2_V12
- DGE-2_V15
- DGE-2_V24
Fixes/Changes from 40.00.006 to Latest:
Library Update
- New symbols
- ATC-AUDIONET new model with Pandora support. This model replaces the existing one.
- Fusion 9.0
Fixes/Changes from 39.05.014 to Latest:
Library Update
- New symbols
- Updated symbols
- Changed modeling of Versiports and Digital I/O ports in SIMPL Windows so that Occupancy Sensors are only droppable on ports where they will actually work.
Detailed explanation:
In the past, SIMPL Windows treated all of Crestron’s “generic input” ports as the same. That is, it didn’t distinguish between a Versiport and, say, the inputs on the PAC2M (which only accept a dry contact). The result was that tools like D3 Pro and SB would allow the user to place Crestron's occupancy sensors onto ports that physically could not support them.
This change in this version of the Device Database should fix the problem, where now devices should be better matched to the input ports.
Crestron's occupancy sensors should now only be allowed to drop onto Versiports, or other ports designed specifically for them (e.g. the occupancy sensor inputs on the GLPAC).
Note: For the "Versiport and Digital I/O ports" changes to work properly Crestron Database v.30.00.001 and up is required.
VTPRO-e
- Added support for UFO-WRX-3EX
Engraver
- Added support for the following products:
- CLWI-1DIMU2EX
- CLWI-1SW2EX
- CLWI-DIMFLVEX
- CLWI-DIMUEX
- CLWI-KPLCN
- CLWI-KPLEX
- CLWI-KPLEX-BATT
- CLWI-SWEX
Fixes/Changes from 39.00.005 to Latest:
Library Update
- New symbols
- DM-RMC-200-S
- DM-RMC-SCALER-S
- Updated symbols
- Core 3 UI support has been added for the following touch panels:
- TPMC-4SM
- TPMC-4SMD
- TPMC-4SM-FD
- TPMC-4SMD-FD
- TPMC-9
- TPMC-9L
VTPRO-e
- Core 3 UI support has been added for the following touch panels:
- TPMC-4SM
- TPMC-4SMD
- TPMC-4SM-FD
- TPMC-4SMD-FD
- TPMC-9
- TPMC-9L
- Help file updated to include support for the Core 3 UI updates for the listed above touch panels.
- Help file updated to include MC3 OSD support.
Note: MC3 OSD Firmware version 1.3.1 or later is required to use with this Device Database.
Fixes/Changes from 38.05.005 to Latest:
Library Update
- New symbols
- Updated symbols
VTPRO-e
- Fixed some issues with reserved joins for Core 3 UI touch screens.
- Fixed size support for Core 3 UI DGE-2 touch screen.
Fixes/Changes from 38.00.002 to Latest:
Library Update
- New symbols
- C2N-IO
- CLF-LDIMUEX
- XPanel for Core3 UI
- Updated symbols
- 3-Series OSD
- CLS-C6RF/CLS-C6MRF
- DGE-2
- MLX-3
- PLX3
- TPMC-V12
- TPMC-V15
- TPMC-8X-GA
VTPRO-e
- Added support for the following panels:
- TPMC-V12 Core 3 UI
- TPMC-V15 Core 3 UI
- TPMC-8X-GA Core 3 UI
- DGE-2 Core 3 UI
- XPANEL Core 3 UI
- XPANEL-WEB Core 3 UI
Fixes/Changes from 37.05.011 to Latest:
Library Update
- New symbols
- GLPP-1DIMFLV3CN-PM
- GLPP-1DIMFLV2CN-PM
- GLPP-DIMFLVCN-PM
- GLPP-1SW3CN
- GLPP-1SW2CN
- GLPP-SWCN
- Updated symbols
- CAPTURE-HD
- CAPTURE-HD-PRO
- TPMC-9L (Cresnet)
VTPRO-e
- Help information has been added/updated for the following devices:
- TPMC-3SM
- TPMC-3SMD
- Crestron Mobile
Toolbox
- Added support for the following devices:
- GLPP-1DIMFLV3CN-PM
- GLPP-1DIMFLV2CN-PM
- GLPP-DIMFLVCN-PM
- GLPP-1SW3CN
- GLPP-1SW2CN
- GLPP-SWCN
Engraver
- Added support for GLPPA-KP.
Fixes/Changes from 37.00.008 to Latest:
Library Update
- New symbols
- 3-Series OSD
- C2N-AMP-4x100
- C2N-TAMFMXM
- CAPTURE-HD
- CAPTURE-HD-PRO
- CLC-1DIMFLV2EX-24V
- TPMC-3SM
- TPMC-3SMD
- DIN-DALI-2 (Ethernet) model added.
- Updated symbols
- CLI-220N-4
- MLX-3 TSTAT renamed to MLX-3 Thermostat
- SWAMP (Ethernet) SystemBuilder model
VTPRO-e
- Added support for TPMC-3SM and TPMC-3SMD.
- Added support for 3-Series OSD.
- Added support for Android with Crestron Mobile.
Toolbox
- Added support for CAPTURE-HD and CAPTURE-HD Pro.
- Added support for TPMC-3SM and TPMC-3SMD.
- Added support for C2N-TAMFMXM.
- Added support for C2N-AMP-4x100.
Engraver
- Released support for TPMC-3SM and TPMC-3SMD.
- Released support for C2N-AMP-4x100 and C2NI-AMP-4x100.
Fixes/Changes from 37.00.004 to Latest:
Library Update
- Updated symbols
- TPMC-4SMD
- TPMC-4SM-FD
- TPMC-4SMD-FD
- Help updates for:
- TPMC-4SMD
- TPMC-4SM-FD
- TPMC-4SMD-FD
VTPRO-e
- Added video input selection capability to the TPMC-4SM-FD and TPMC-4SMD-FD.
- Added TPMC-4SM-FD help.
- Added TPMC-4SMD-FD help.
Fixes/Changes from 36.05.006 to Latest:
Library Update
- New symbols
- CHV-TSTATEX-FCU.
- DM-MD6x4.
- DM-MD6x6.
- DM-TX-200-C-2G.
- DMPS-300-C.
- P-TSTATEX-FCU.
- TPMC-4SM-FD.
- TPMC-4SMD-FD.
- Updated symbols
- TPMC-8X-GA.
- XPanel.
- DMC-S2.
- DMC-S2-DSP.
- DMC-S2O-HD.
- Include.dat for 3-Series control systems upgraded to version 1.13.073
VTPRO-e
- Added support for TPMC-4SM-FD and TPMC-4SMD-FD panels.
- Added support for new reserved joins in new firmware for TPMC-8X-GA panel.
- Added support for higher quality (16-level) fonts for TPMC-4SM/4SMD/9/9L panels.
- Enabled new algorithm to better estimate project size for TPMC-4SM/4SMD/9/9L panels.
Engraver
- Released support for TPMC-4SM-FD.
- Released support for TPMC-4SMD-FD.
- Released support for DMPS-300-C.
- Released support for DM-MD6X4.
- Released support for DM-MD6X6.
Fixes/Changes from 36.02.002 to Latest:
Library Update
- New symbols
- CHV-TSTATEX
- DM-RMC-SCALER-C
- DMC-S2
- DMC-S2-DSP
- DMC-S2O-HD
- DMCI-DMC-S2
- DMCI-DMC-S2-DSP
- DMCO-60
- DMCO-63
- DMCO-64
- DMCO-65
- DMCO-66
- MLX-3
- P-TSTATEX
- SWAMPE-4
VTPRO-e
- Added support for MLX-3.
- Add new fonts:
- Guifx V2 Transports.
- Guifx V2 Transports Labeled.
- Crestron Transport.
- Crestron mono for XM for Crestron Mobile.
Engraver
- Added support for SWAMPE-4
Notes:
- PLX3 in SIMPL Windows - SIMPL Windows programmatic control of Image List Icons is not available until an October VTPro-e release (Applicable signals: ListItemIcon#).
- In the already released VTPro-e, You may still choose images per list item. However, if you wish to have your SIMPL program drive the icon, that support is forthcoming.
Fixes/Changes from 35.05.009 to Latest:
Library Update
The include4.dat file shipped with this Device Database enables the THREADSAFE keyword in SIMPL+ for the 2-Series processors. It is already a legal keyword for the 3-Series processors. HOWEVER, until firmware version 4.6 is released for the 2-Series, you will not be able to use it, and will get warning messages when uploading the program to the 2-Series processor. Until then, please continue to use conditionals around the THREADSAFE keyword as you are currently doing, when using it for the 3-Series only.
Fixes/Changes from 35.05.004 to Latest:
Library Update
VTPRO-e
- Enables PLX3 editing in Vision Tools Pro-e.
- Added new help file for VisionTools Pro-e.
- Fixed incorrect reserved joins for DGE-2_V12/V15/V24.
Engraver
- Released CEN-RGBHVHB16x16.
Fixes/Changes from 34.00.012 to Latest:
Library Update
- New symbols
- CEN-RGBHVHB16x16
- DGE-2
- PLX3
- PMC3 (PLX3)
- TPMC-8X-GA
- VPG-24
- MC3 Remote Ethernet Processing
- Updated symbols
- P-IDOCV
- PMC2+ allows one RoomView Connected Display
- PMC2 (PLX2) allows one RoomView Connected Display
- PMC3+ allows one RoomView Connected Display
- PMC3 (PLX3) allows one RoomView Connected Display
- DMCI-DMC-HD
- DMCI-DMC-HD-DSP
- DMCI-DMC-DVI
- DMCI-DMC-VID-RCA-A
- DMCI-DMC-VID-BNC
- DMCI-DMC-VID-RCA-D
- DMC-HD
- DMC-HD-DSP
- DMC-VID-RCA-A
- DMC-DVI
- DMC-VID-BNC
- DM-MD6x1
- DM-TX-100
- DM-TX-100-F
- DM-TX-200
- DM-TX-300N
- DM-TX-300N-F
- DM-TX-400-3G
- DM-TX-200-2G
- DM-TX-201-C
- DM-TX-201-S
VTPRO-e
- Added support for the following devices:
Fixes/Changes from 33.05.007 to Latest:
Library Update
- New symbols
- CEN-RGBHVHB12X4
- CEN-RGBHVHB8X8
- CEN-RGBHVHB8X4
- PT-AMFM
- Updated symbols
VTPRO-e
- Released Analog and Video objects for Crestron Mobile panels
Engraver
- Released CEN-RGBHVHB12X4, CEN-RGBHVHB8X8, CEN-RGBHVHB8X4
Fixes/Changes from 33.00.005 to Latest:
Library Update
- New ymbols
- CEN-NVS200
- CEN-RGBHVHB12x8
- Updated symbols
- GLPAC control processors get new Remote Generic Intersystem Communication symbol
- DIN-2MC2 (max 4) is now allowed on Prodigy control processors
- DIN-4DIMFLV4 (max 4) is now allowed on Prodigy control processors
- PMC2 (PLX2) now accepts 2 more Cresnet devices (max 4 each)
- PMC2+ now accepts 2 more Cresnet devices (max 4 each)
- PMC3+ now accepts 2 more Cresnet devices (max 4 each)
- iPhone/iPad Native has been renamed to Crestron Mobile
- C2N-CBD-P Versiport updated
- C2N-CBF-P Versiport updated
- PMC3-XP now allows dropping MLX-3 in its RFGW-EX gateway has a limit on how many can be used.
- DM-RMC-150-S
- DM-RMC-200-C
- DM-TX-200
- DM-TX-201-C
- DM-TX-201-S
- DM-TX-300N
- DM-TX-300N-F
- DM-TX-400-3G
- HD-SCALER
VTPRO-e
Engraver
- Released CEN-RGBHVHB12x8.
- Added extra column for button layout order in Buttons table to support the combinable buttons keypads.
Fixes/Changes from 32.05.002 to Latest:
Library Update
- New symbols
- PSPHD new model with 3 additional slots
- Updated Symbols
- CLCI-DIMUEX
- CLCI-1SW2EX
- CLCI-DIMFLV2EX
- CLS-C6/CLS-C6M
- P-CBD-AD-WIRED issue fixed
- TPMC-4SM - new VOIP Reserved Joins extender
VTPRO-e
- New help file with TPMC-4SM/4SMD added.
Fixes/Changes from 32.00.020 to Latest:
Library Update
- New symbols
- ADMS new model
- CLCI-DIMUEX
- CLCI-1SW2EX
- CLCI-DIMFLV2EX
- HD-SCALER
- Updated symbols
- Help changed for PMC3+ and PMC3-XP
Fixes/Changes from 32.00.016 to Latest:
Library Update
- New symbols
- MC3 generation 3 control system
- PMC3+ generation 3 control system
- PMC3-XP generation 3 control system
- P-MNETGW (a new model)
- P-RFGW-EX (Ethernet for PMC3+)
- P-RFGW-EX (Ethernet for PMC3-XP)
- Updated symbols
- P-MNETGW renamed to "P-MNETGW (Old)"
VTPRO-e
Engraver
Fixes/Changes from 31.05.011 to Latest:
Library Update
- New symbols
- DM-RMC-150-S
- DM-RMC-200-C
- TPMC-9L
- Updated symbols
- DMC-DVI
- DMCI-DMC-DVI
- DM-TX-400-3G
- TPMC-9
- iPhone/iPad Native
VTPRO-e
- Reduced Maximum project size for TPMC-4SM & TPMC-4SMD to 60 MB (was previously 80 MB).
- Added minimum size data for embedded apps to assist VTPro-e when calculating memory usage for TPMC-4SM, TPMC-4SMD and TPMC-9 projects.
- Added support for TPMC-9L.
Engraver
- Released support for TPMC-9L.
Fixes/Changes from 31.00.005 to Latest:
Library Update
- New symbols
- C2N-CBD-P
- C2N-CBD-E
- C2N-CBF-P
- INET-CBDEX-P
- INET-CBDEX-E
- P-CBDCN
- P-CBDEX
- P-KPLEX
- iPhone/iPad Native
- Updated symbols
- DM-RMC-100
- DM-RMC-100-F
- DM-TX-100
- DM-TX-200
- DM-MD6x1
- DM-TX-300N
- DM-TX-300N-F
- DM-TX-400-3G
- DM-TX-201-C
- DM-TX-201-S
- DMCI-DMC-SDI
VTPRO-e
- Changed default Text Style from "Embossed" to "Aliased" for objects on most panels. This will be visible in new projects or new objects added to existing projects, it will have no affect on unmodified, existing projects.
- Added new Pad Area type, Absolute HID Mouse, for DVPHD and DVPHD-CUSTOM_GB panels.
Engraver
- Released support for the following devices:
- C2N-CBD-P
- C2N-CBD-E
- C2N-CBF-P
- INET-CBDEX-P
- INET-CBDEX-E
- P-CBDCN
- P-CBDEX
- P-KPLEX
- Added support for image ZOrder for Combinable Buttons Keypads.
Fixes/Changes from 30.07.001 to Latest:
Library Update
- New symbols
- TPMC-V12
- TPMC-V15
- SWAMP-24x8 with SWAMPE-8
- Updated symbols
- DGE-1
- GLPAC-DIMFLV4
- GLPAC-DIMFLV4-PM
- GLPAC-DIMFLV8
- GLPAC-DIMFLV8-PM
- TPMC-12
- RoomView Express/RoomView 6.0 (with Emergency)
VTPRO-e
- Added support for TPMC-V12
- Added support for TPMC-V15
Engraver
- Added support for SWAMP and SWAMP-E
- Added support for TPMC-V12 and TPMC-V15
Fixes/Changes from 30.06.001 to Latest:
First version to be used with SIMPL Windows 3.00.xx.
Fixes/Changes from 30.05.003 to Latest:
VTPRO-e
- XPanel New Version 1.9.0.38 released:
- Heartbeat was enabled when communicating with XGen processor.
- Application crashed when loading if sound files are present.
- Key click didn't work.
- IPTable.ipt file was created on the desktop when running XPANEL web.
- Scroll bars show up when XPANEL is launched by LaunchXpanel.exe.
Fixes/Changes from 30.00.011 to Latest:
Library Update
- New symbols
- DMC-S
- DMC-S-DSP
- DMC-SO-HD
- DMCO-40
- DMCO-44
- DMCO-43
- DMCO-45
- DMCO-51
- DMCO-53
- DMCO-54
- DMCO-00
- DM-TX-201-S
- DM-MD8x8 with RPS
- DM-MD16x16 with RPS
- DM-RMC-100-S
- DMCI-DMS-S
- DMCI-DMS-S-DSP
- TPMC-9
- Updated symbols
- DMC-HD
- DMC-HD-DSP
- DMC-C
- DMC-C-DSP
- DMC-F
- DMC-F-DSP
- DMC-CAT
- DMC-CAT-DSP
- DMC-FO
- DMC-CATO
- DMC-CATO-HD
- DMC-HDO
- DMC-CO-HD
- DMCI-DMC-C
- DMCI-DMC-C-DSP
- DMCI-DMC-HD
- DMCI-DMC-HD-DSP
- DMCI-DMC-CAT
- DMCI-DMC-CAT-DSP
- DMCI-DMC-F
- DMCI-DMC-F-DSP
- DM-TX-100
- DM-TX-200
- DM-TX-200-2G
- DM-TX-201-C
- DM-TX-300N
- DM-TX-300N-F
- DM-TX-400-3G
VTPRO-e
- Added support for TPMC-9
- Added Language Pack information to built-in fonts
- Increased project size limit for TPS-12G/15G/17G and TPS-17 to 48 MB
Fixes/Changes from 29.00.008 to Latest:
Library Update
- New symbols
- ATC-AUDIONET
- DIN-DALI-2
- VMK-WIN
- TPMC-4SMD
- Updated symbols
- ADMS
- DM-MD6x1
- P-RFGW-EX
- DMC-CATO-HD
- DMC-CATO
- DMC-FO
- DMC-HDO
- DMC-CO-HD
- DM-MD6x1
- DM-TX-300N
- DM-TX-300N-F
VTPRO-e
- Added support for TPMC-4SMD
Engraver
- Added additional colors for INET-CBD.
- Fixed a feedback issue in CLW-SWEX for SystemBuilder.
- Added support for TPMC-4SMD
Note to SIMPL programmers with Adagio systems: There was a change in the device symbol to accommodate the new ATC-AUDIONET card. If you open an existing program with DvcDB 30.00.000 or later, there will be a warning that the control system model has changed and that you should perform a “replace control system” with the same model, which updates the Adagio processor device symbol to the new one. Go ahead and do that. CEN-TRACK users and SystemBuilder users are not affected.
Fixes/Changes from 28.05.004 to Latest:
Library Update
- New symbols
- GLPAC-DIMFLV8-PM control system
- GLPAC-DIMFLV8 control system
- GLPAC-DIMFLV4-PM control system
- GLPAC-DIMFLV4 control system
- DM-MD-32x32 with RPS
- Updated symbols
- TPMC-3X
- DGE-1 extenders updated and the following new ones added:
- Intercom Reserved Joins
- Remote Annotation Reserved Joins
VTPRO-e
- Added VTPro-e support for new features on Crestron Mobile panels (anchoring, rotation support, page background tiling).
- Added new built-in images for VTPro-e support of Crestron Mobile panels.
Fixes/Changes from 28.00.003 to Latest:
Library Update
- New symbols
- DMC-C
- DMC-C-DSP
- DMC-CO-HD
- DMCO configurations DMCO-50, DMCO-55, DMCO-15, DMCO-35
- DMCI-DMC-C
- DMCI-DMC-C-DSP
- DM-TX-201-C
- DM-RMC-100-C
- MTX-3 -Updated symbols
- CEN-RFGW-EX has been changed to reserve a limited range of 6 RF IDs for MTX-3 (9 to 15, 09-0E hex). The rest of the RF IDs are not affected.
VTPRO-e
Toolbox
- Updated Toolbox device data to be equivalent to Toolbox 1.20.051.
- Added support for MTX-3
Engraver
- Added support for CEN-SWPOE-24.
Fixes/Changes from 27.05.003 to Latest:
Library Update
- New symbols
- Updated symbols
- TPMC-12 additional reserved joins
- DMC-VID-BNC
- DMC-CAT-DSP
- DMC-CAT
- DMC-VID-RCA-A
- DMC-VID-RCA-D
- DMC-F
- DMC-F-DSP
- DMC-VID4
- DMC-CATO-HD
- QM-AE1
- QM-AE4
VTPRO-e
- Additional reserved joins for TPMC-3X
- Additional reserved joins for TPMC-12
Fixes/Changes from 27.01.004 to Latest:
Library Update
- New symbols
- Updated symbols
- DM-TX-200
- DM-TX-300N
- DM-TX-400-3G
- RoomView Connected Display
- VPG_12 and VPG_15 Glass extenders
Toolbox
Fixes/Changes from 27.00.006 to Latest:
Library Update
- New symbols
- DMC-SDI
- DMCI-DMC-CAT
- DMCI-DMC-CAT-DSP
- DMCI-DMC-F
- DMCI-DMC-F-DSP
- DMCI-DMC-SDI
- Updated symbols
- AADS
- AADS-XM
- AES
- AMS
- AMS-AIP
- PROAMP-7x400
- PROAMP-7x250
- PSPHD
- DM-MD6x1
- DMC-FO
- TPMC-12
VTPRO-e
- Added XPanel v1.9.0.6, PC & Web versions. Adds 64-bit support (Requires version 4.1.08 of VTPro-E).
Engraver
- Removed the following panels from stand-alone Engraver and changed them to Read-Only/Programmable-Only for SystemBuilder support:
- P-CBD
- P-CBD-AD
- P-CBD-AD-WIRED
- P-DIMRF
- P-SWRF
- PTL4
Fixes/Changes from 27.00.004 to Latest:
VTPRO-e
- New XPANEL v1.9.0.5 that includes 64-bit support.
Fixes/Changes from 27.00.003 to Latest:
Library Update
- Updated symbols
- RoomView Connected Display
Fixes/Changes from 26.07.002 to Latest:
Library Update
- New symbols
- PT-AMFMXM
- QM-AE1
- DM-MD32x32
- iPad interface to control system via TCP/IP
- Updated symbols
- AAE (For AMS Additional Rooms XX-YY) name changed to AAE (For AES/AMS/AADS Additional Rooms XX-YY)
- All DMCI card symbols
NOTE: RoomView 7.2 symbol update resolves a problem that caused serial signals to be incorrectly imported by RoomView. Existing programs with RoomView 7.2 symbols in them must be recompiled with the latest symbol to incorporate the fix. To implement the new symbol, add a new RoomView SE/RoomView 7.2 symbol to your program, copy all signals to the new symbol from the existing symbol, then delete the existing symbol.
Fixes/Changes from 26.06.006 to Latest:
Library Update
- New symbols
- DM-TX-200-2G
- DM-TX-400-3G
- RoomView Connected Display
- VPG 12 VPanel
- VPG 15 VPanel
- Updated symbols
- P-CBD
- P-CBD-AD
- P-CBD-AD-WIRED
- DM-TX-200
- DM-TX-300N
- DM-TX-300N-F
- RoomView SE/RoomView 7.2
- TPMC-8L extender renamed
- PTX3 extenders updated
Fixes/Changes from 26.06.002 to Latest:
Library Update
- Updated symbols
- PMC2 new symbol name changed to PMC2+
Fixes/Changes from 26.05.004 to Latest:
Library Update
- New symbols
- CLW-DIMEX-E.
- CLW-DIMEX-P.
- CLW-DIMSWEX-E.
- CLW-DIMSWEX-P.
- CLW-SWEX-E.
- CLW-SWEX-P.
- CLW-LDIMEX-1.
- CLW-LDIMEX-2.
- CLW-LSWEX-1.
- CLW-LSWEX-2.
- P-DIMEX.
- P-SWEX.
- P-LDIMEX.
- P-LSWEX.
- PROAMP-7x400.
- PROAMP-7x250.
- CEN-RFGW-EX - new model, which does not allow MLX-2 devices to be dropped on it.
- PMC2 symbol with a new P-RFGW-EX allowing all Prodigy infiNET EX devices but PLX2.
- PTX3.
- Updated symbols
- CEN-RFGW-EX existing symbol renamed to "CEN-RFGW-EX (Ethernet for MLX-2 ONLY)" and allows only MLX-2 devices to be dropped on it.
- PMC2 updated symbol with internal updated P-RFGW-EX allowing only PLX2 devices to be dropped on it.
- Adagio processors
- PSPHD
- TPMC-12
VTPRO-e
- Released PTX3 panel.
- Updated reserved joins for TPMC-12.
Engraver
- Released support for infiNET EX CLWs
Fixes/Changes from 26.05.001 to Latest:
Library Update
- New symbols
- Updated symbols
- CEN-RFGW-EX has been renamed and now accepts only MLX-2 devices.
- P-RFGW-EX internal gateway for PMC2 has been renamed and now accepts only PLX2 devices.
Toolbox
- Added new support: ADMS, PAMP-4X100, C2N-UNI8IO
Engraver
- Added new colors for C2N and CNX keypads.
- Released C2N-UNI8IO for D3Pro support.
Fixes/Changes from 26.00.005 to Latest:
Library Update
- New symbols
- Updated symbols
- TPMC-12
- DIN-1DIMU4
- DIN-1DIM4
- The following Digital Media input cards
- DMC-HD
- DMC-HD-DSP
- DMC-DVI
- DMC-F
- DMC-F-DSP
- DMC-CAT
- DMC-CAT-DSP
- QM-RX1-2G
- The following devices have a new extender (Annotation Reserved Joins 2)
- TPS-12
- TPS-12G-QM
- TPS-15
- TPS-15G-QM
- TPS-17
- TPS-G-TPI
- TPS-GA-TPI
- DVPHD
Engraver
- Added support for DM-MD32X32
Fixes/Changes from 25.05.002 to Latest:
Library Update
- New symbols
- P-CBD-AD
- P-CBD-AD-WIRED
- PAMP-4x100
- Updated symbols
VTPRO-e
- Added Custom setting for display output on DVPHD-CUSTOM_GB panels.
Engraver
- Added support for P-CBD-AD and P-CBD-AD-WIRED.
NOTE: Please keep in mind that in order to use the new device PAMP-4X100 you will also need to install Crestron Database version 21.02.008.
Fixes/Changes from 25.00.006 to Latest:
Library Update
- New symbols
- Updated symbols
VTPRO-e
- Updated VTPro-e help file
- Added two fonts "TP Gui Transports" and "TP Gui Cons 01" for XPanel for Mac
Applications
- XPanel for Mac executable released
Fixes/Changes from 24.05.004 to Latest:
Library Update
- New symbols
- ADMS
- DGE-1
- DIN-1DIM4
- DIN-8SW8-I
- PSPHD
- TPMC-4SM
- TPS-6
- XPanel for Mac
- Updated symbols
- DM-TX-100
- DM-TX-200
- DM-TX-300N
- DM-TX-300N-F
- DMC-* (most of the DMC input and output cards)
- DMCO-** (all DMCO configurations)
- DMCI-* (most of the DMCI cards)
VTPRO-e
- Added support for:
- ADMS
- TPS-6
- TPMC-4SM
- XPanel for Mac
- DGE-1_V12
- DGE-1_V15
- D-Nav enabled for TPS-6L and TPS-6X
Toolbox
- Fixed CEN-TRACK reboot timeout
- Added support for TPS-6
Engraver
- Added support for the following products:
- TPS-6
- DIN-8SW8-I
- DIN-1DIM4
- PAMP-4X100
Fixes/Changes from 23.08.004 to Latest:
Library Update
- New symbols
- DM-TX-300N
- DM-TX-300N-F
- DMC-HDO
- DMCO-33
- DMCO-30
- DMCO-13
- DMCO-23
- DMCO-21
- Updated symbols
- MPS-100
- MPS-200
- MPS-250
- MPS-300
- GLXX-CTRL
- GLXP-SW16
- GGLXP-SW10
- GLXP-SW10
- GLXP-HSW12
- GLXP-HSW8
- DIN-8SW8
- GLX-DIMFLV8
- GLXP-DIMFLV8
- All DM input and output cards
- All DMCI cards
- DM-TX-100
- DM-TX-200
- DM-MD6x1
- DM-MD8x8
- DM-MD16x16
Fixes/Changes to 23.08.001 to Latest:
Library Update
- Updated symbols
- TPS-4L
- QM-FTCC-TPS4
- C2N-FT-TPS4
- MPC-M5
- CEN-RGBHV32x32V
- CEN-RGBHV32x32AV
- Update of the help file to the latest changes
Engraver
- Added Engraver support for TPMC-4SM
Fixes/Changes to 23.07.002 to Latest:
Library Update
VTPRO-e
- Updated help file for VTPRO-e
Fixes/Changes to 23.06.002 to Latest:
Library Update
Fixes/Changes to 23.05.002 to Latest:
VTPRO-e
- Adjusted Text Styles for best performance on the TPMC-3X in VTPRO
Fixes/Changes to 22.06.003 to Latest:
Library Update
- New Symbols
- Updated symbols
- GLXX-CTRL.
- PMC2 added RoomView support.
VTPRO-e
- DVPHD-CUSTOM-GB panel released.
- Hard buttons labels changed for MLX2 and PLX2.
- Adjusted Text Styles for best performance on the TPMC-3X in VTPRO
Engraver
- Added support for MPC-M5.
Fixes/Changes to 21.05.025 to Latest:
Library Update
- New Symbols
- HD-MD8x1 for use with AMS (Ethernet and Cresnet versions)
- HD-MD8x2 for use with AMS-AIP (Ethernet and Cresnet versions)
- Updated symbols
- DM-MD6x1
- CEN-TRACK 2.0 renamed to CEN-TRACK
- CEN-TRACK renamed to CEN-TRACK (old)
- TPMC-3X
- GLXX-CTRL
- PMC2
- DIN-8SW8
- DMC-VID-RCA-A fixed DM flags
- DMC-VID-RCA-D fixed DM flags
- DMC-VID-BNC
- DM-TX-100-F
VTPRO-e
- Added new pad area "Relative HID Mouse" support for TPS-6X panels.
- Added D-Nav support for TPS-6X panels.
- Added D-Nav support for TPS-4 panels.
- Crestron Control renamed to Crestron Mobile Pro.
Fixes/Changes to 21.05.016 to Latest:
Library Update
- New Symbols
- DM-MD6x1
- DMC-F
- DMC-F-DSP
- DM-TX-100-F
- TPMC-3X
- CEN-IDOCV-DSW
- GLXX-CTRL
- Updated symbols
- HD-MD8x1 and HD-MD8x2
- DM-TX-100
- TPS-4L and family touch panels
- DMC-HD Advanced
- DMC-VID4 Advanced
- DMC-VID-RCA-A Advanced
- DMC-VID-RCA-D Advanced
- DMC-HD-DSP Advanced
- DMC-DVI Advanced
- DMC-VID-BNC Advanced
- TPMC-12
- MPS-200
- CHV-TSTATRF
- P-TSTATRF
Engraver
- Added support for CEN-IDOCV-DSW.
- Added new image for PTL4.
VTPRO-e
- Added support for TPMC-3X.
- Added support for Prodigy panels.
- Updated default Page Group Indicator to new graphic for the TPMC-3X.
- Added support for serial reserved join "Project Name Text Join" for TPS-4L, QM-FTCC-TPS_TPS4, C2N-FT-TPS4 and TPS-6X/L/IR panels.
- Added support for indicator arrows in Footer text line using MLX-2 and PLX-2.
Fixes/Changes to 21.05.015 to Latest:
Library Update
- Updated symbols
- DMC-HD
- DMC-VID4
- DMC-VID-RCA-A
- DMC-VID-RCA-D
- DMC-HD-DSP
- DMC-DVI
- DMC-VID-BNC
Fixes/Changes to 21.05.009 to Latest:
Library Update
- New Symbols
- CEN-IDOCV-DSW
- UDP/TCP client symbols
- Updated symbols
- P-CBD
- P-IDOCV
- TPMC-12
- PTL4
- iPhone
VTPRO-e
- Released Crestron Control, PTL4 and PLX2 panels
- Updated reserved joins for TPMC-12
- Changed the name for iPhone and iPod Touch to Crestron Mobile
Engraver
- Added buttons extra data for P-CBD
- Added programmable buttons data in support of PTL4 and P-CBD.\
- Adjusted font height for TPS6X from 2.54mm to 2.2mm
Fixes/Changes from 21.00.005 to Latest:
Library Update
- New Symbols
- All Prodigy device family symbols
- DM-MD16x16
- Updated symbols of the following devices
- DMCI (all devices)
- DM-TX-200
- DM-RMC-100 and DM-RMC-100-F
- DMC-HD and DMC-HD-DSP
- DM-MD8x8 and all new cards
- HD-MD8x1 and HD-MD8x2
Engraver
- Added support for the following Prodigy products:
- P-DIMRF
- P-SWRF
- P-CBD
- PTL4
- Changed the number of maximum allowable text lines for TPS-4L from 2 to 1.
Fixes/Changes from 20.09.005 to Latest:
Library Update
- New Device Models
- HD-MD8x1 and HD-MD8x2
- MPC-M50
- RoomView Server Edition changes (7.0 and 7.2 versions of the symbol)
- Free/Busy functionality added
- Room Data extender has "LocalDateTimeQuery" functionality added.
VTPRO-e
- Support added for MPC-M50
Toolbox
- TPMC-4XG: Added pop-up notifications about possible issues during project load.
Fixes/Changes from 20.08.004 to Latest:
Library Update
- New Device Models
- GLS-SIM
- Touch Panel support:
- TPMC-12
- TPS-6X Docking Station support via changes to RF and System extenders.
- Quick Media Devices:
- QM-WCC-1/QM-FBCC-1
- QM-RX1-2G
- Digital Media Cards:
- Digital Media Transmitters:
- Models to support DMCI:
- DMCI-DMC-VID4
- DMCI-DMC-VID-RCA-D
- DMCI-DMC-VID-RCA-A
- DMCI-DMC-HD
- DMCI-DMC-HD-DSP
- DMCI-DMC-VID-BNC
- DMCI-DMC-DVI
- DM-RMC-100, DM-RMC-100-F IR Port is now limited to 19200 baud for 1-Way Serial Transmission
- DM-RMC-100-F now can only drop on Fiber capable DM Output cards.
- RoomView SE (7.0, 7.2) no longer drops on X Generation Ethernet cards (It did not work anyway!)
- TPS-6X (Cresnet) is now 15.0W
- Correct HelpID for GLX-DIM6
- Rename hard buttons on MLX-2 to match the buttons better.
VTPRO-e
- Release TPMC-12 panels.
- Add Page level hard key join support for TPS-4L, QM-FTCC-TPS_TPS4 and C2N-FT-TPS4 panels.
- Reduce display size to from 7168000 to 6553600 for TPS-4L, QM-FTCC-TPS_TPS4 and C2N-FT-TPS4 panels.
- Add new reserved joins to support Dock station for TPS-6X panel.
Engraver
- Added support for MPC-M50.
Fixes/Changes from 20.08.003 to 20.08.004:
Library Update v596
- Correct issue with RoomviewExpress/6.0:
- If you used Device Database 20.08.003 and created an iMedia project, SystemBuilder would throw many errors. Device Database 20.08.004 fixes this.
- There is one caveat with this fix: If a SIMPL Windows programmer creates a new project with Roomview Express/6.0 device using Device Database 20.08.003 and then upgrades to 20.08.004 the project will fail to open. They MUST send their SIMPL Program to Crestron to be fixed, else it will not load into SIMPL!
Fixes/Changes from 20.07.005 to 20.08.003:
Library Update v595
- New Device Models:
- DMC-DVI
- DMC-FO
- DMC-VID-BNC
- DM-RMC-100-F
- Sequel Technologies ST-8
- Revised Device Models:
- RoomView Express (with Emergency alerts and further expansion)
Engraver
- Added support for DM-MD6x1 and DM-MD16x16.
- Changed font height and line height for DM, HD, MPS, and CEN paper labels.
- Fixed images for MPS-250, DM-MD16x16, DM-MD6x1, DM-MD8x8, CEN-RGBHV32x32, HD-MD8x1, and HD-MD8x2.
- Fixed issue with parts ordered on the following panels: TPS-4000L, TPS-3100L, TPS-3000L, TPS-2000, CT-1000, LC-1000.
Fixes/Changes from 20.07.002 to 20.07.005:
VTPRO-e
- Help for iPhone/iPod Touch projects.
Fixes/Changes from 20.06.016 to 20.07.002:
Library Update v593
- Correct Symbol I/O on Digital Media symbols (Note: You may be prompted with the need to resync your project in SIMPL)
- Proper validation for IM-RXV1-M, IM-RXV3-M, MPC Models and IPAC for XPanel and iPhone/iTouch interfaces for SystemBuilder/Toolbox
- New Models:
- MP-B10 Cresnet/Ethernet button panel
- MP-B20 Cresnet/Ethernet button panel
- Video Termination Slot (Slot 6) for CEN-RGBHV32x32V and CEN-RGBHV32x32AV switcher models.
- CEN-RGBHV32x32A default Cresnet ID changed to 93.
- Correct Power Factor for:
- QM-WCC-2
- QM-WMC-VCC
- QM-TX2-MC
- QM-TX2-CC
- GLXP-SW10
- GLXP-SW16
- GLXP-HSW8
- GLXP-HSW12
- GLXP-DIMFLV8
- The following models now have the capability of supporting up to 2M of SIMPL+ memory, via the SPLUSMEMSIZE console command (NOTE: REQUIRES CUZ 4.001 or later!)
- PAC2M
- AES
- AMS
- AMS-AIP
- AADS
- AADS-XM
- MPS-100
- MPS-200
- MPS-250
- MPS-300
- DIN-AP2
- MPC-M10
- MPC-M20
- MPC-M25
- "ASCII Keypad" (SDACA, ASCIIPAD) symbol now will properly Make-Complete in SIMPL (CTRL-I)
- ActiveCNX symbol now has 4000 Serial I/O
- Correct Help ID's for:
- ADG/AMS One-way serial driver
- AADS One-way serial driver
- MPS One-way serial driver
- DIN-AP2 One-way serial driver
- MPC One-way serial driver
- DM-MD8x8
- DM-CATO
- DM-CATO Output 1-4
- DMC-HD
- DMC-HD Advanced
- DMC-VID4
- DMC-VID4 Advanced
- DM-RMC-100
- DMC-CATO-HD
- DMC-CATO-HD Output 1-4
- DMC-VID-RCA-A
- DMC-VID-RCA-A Advanced
- DMC-VID-RCA-D
- DMC-VID-RCA-D Advanced
- DM-RMC Two-way serial driver
- GLX-DIMFLV8
- DMC-HD-DSP
- DMC-HD-DSP Advanced
- DM-RMC One-way serial driver
- QM-TX2-MC
- QM-TX2-MC-IR1 One-way serial driver
- QM-TX2-CC
- QM-TX2-CC-IR1 One-way serial driver
- CEN-RFGW-EX (Ethernet)
- CEN-RFGW-EX (Cresnet)
- MLX-2
- GLXP-DIMFLV8
- iPhone/iPod Touch interface to control system via TCP/IP (Connection 1 of 2)
- iPhone/iPod Touch interface to control system via TCP/IP (Connection 2 of 2)
- TPMC-15/17-QM Touch Out
- CEN-RFGW-EX device extenders
- Correct Hints on:
- GLX-HSW8
- DMC-VID-RCA-A
- QM-TX2-MC
- QM-TX2-CC
- MPS 1-Way Serial Driver
- MPC 1-Way Serial Driver
- IPAC Screen Interface
Toolbox
- Preliminary Toolbox Support for MP-B10/MP-B20, Full support available in Toolbox 1.14.
Engraver
- Added support for HD-MD8X1 and HD-MD8X2.
- Added support for Engraver to be able to set the print text color from within database.
- Fixed CEN-TRACK issue with font being too high.
- Changed widths of text areas for C2NICB and HTTB10X as a fix for text being engraved up to button borders.
Fixes/Changes from 20.06.012 to 20.06.016:
VTPRO-e
- Maximum project size for iPhone/iTouch interfaces is 256000 bytes (requires VTPRO-e 3.9.29 or later)
Library Update v589
Fixes/Changes from 20.06.008 to 20.06.012:
Engraver
- Added support to set print orientation from within database.
General
- Update SIMPL Windows help file.
Fixes/Changes from 20.06.007 to 20.06.008:
Library Update v587
- Update CHV-TSTATRF compiler model. If you are using CHV-TSTATRF firmware v1.005.0005 and 2 Series firmware 4.001.1012 (or later) you MUST recompile your program using this database. This will prevent the TSTATRF from potentially entering the OFF mode upon control system reboot or program restart.
Fixes/Changes from 20.06.004 to 20.06.007:
Library Update v586
- DVPHD now has 4000 Serial I/O Joins.
VTPRO-e
- Alter maximum number of joins available to VTPRO-e for iPhone/iPod Touch projects.
Fixes/Changes from 20.05.018 to 20.06.004:
Library Update v585
- Release "iPhone/iPod Touch interface to control system via TCP/IP" model.
Engraver Release Notes:
- Added suport for the following panels:
- Added support for Engraver to query panels having physical buttons.
- Added support for Engraver to query programmable only panels.
- Adjusted C2NCB and C2NCBTS text area's widths so that engravable text does not reach button edge.
Fixes/Changes from 20.05.014 to 20.05.018:
VTPRO-e
Fixes/Changes from 20.05.012 to 20.05.014:
VTPRO-e
- Change to allow consistency between the property grid and the attributes dialog for radius shape. Programmers may see a blank selection in the dialog for the radius attribute. This causes no problem, however it can simply be reselected to allow the attribute to be seen.
Fixes/Changes from 20.05.009 to 20.05.012:
VTPRO-e
- Fixed Hardbutton manager crash for TPMC-17-QM.
Fixes/Changes from 20.04.015 to 20.05.009:
Library Update v584
- New Device Models (Note that these devices do not currently have help topics)
- DigitalMedia products:
- DM Midpoints
- DM Input Cards
- DMC-HD
- DMC-HD-DSP
- DMC-VID4
- DMC-VID-RCA-A
- DMC-VID-RCA-D
- DM Transmitters
- DM Output Cards
- QM-TX2-MC
- QM-TX2-CC
- MLX-2
- CEN-RFGW-EX
- GLX-DIMFLV8
- GLXP-DIMFLV8
- ActiveCNX .NET Interface
Toolbox
- Please note that MLX-2 requires Toolbox 1.13.2XX
- Please note that DigitalMedia requires Toolbox 1.13.3XX
VTPRO-e
- MLX-2 Support (Please note that VTPRO-e 3.9.21 or later is required to program the MLX-2)
Engraver
- Added support for the following panels:
- DM-MD8X8
- IPAC
- CEN-RGBHV32X32V
- TPS-6IR (Same as TPS-6X but is added as support for SystemBuilder)
- TPS-6X-FPB-T (Black Textured Bezel)
- Added support for new Title Group feature for paper labels
- Added support for setting font height and line spacing for the CNRFHT-30A remote
Fixes/Changes from 20.04.010 to 20.04.015:
- Update Help file for CEN-ISERVER changes.
Fixes/Changes from 20.04.009 to 20.04.010:
Library Update v579
- Update CEN-ISERVER to release symbol.
Fixes/Changes from 20.04.005 to 20.04.009:
Library Update v578
- Implement Help ID's for CEN-ISERVER and CEN-RGBHV32x32 switchers.
VTPRO-e
- Increase XPanel maximum serial joins to 4000.
Fixes/Changes from 20.04.001 to 20.04.005:
Engraver
- Created new table called NewProgrammableButtons as a fix for panel ids issue between EngraverDefinitions and ProgrammableButtons table.
Fixes/Changes from 20.03.013 to 20.04.001:
Library Update v577
- Expose CEN-RGBHV32x32AV Ethernet/Cresnet models
- Expose CEN-RGBHV32x32A Ethernet/Cresnet models
- Expose CEN-RGBHV32x32V Ethernet/Cresnet models
- Expose CEN-ISERVER model
- Expose TPS-17G-QM Ethernet/Cresnet models
- Expose RoomView SE/Roomview 7.2 model
- DIN-AP2 COM ports now show correct serial driver signals.
- Correct scaling factor for knob on MPC and IPAC control systems
VTPRO-e Release TPS-17G-QM panels.
Toolbox
- New Device Support
- Digital Media: DM-MD8x8, DM-RMC-100, DM-DR, DMC-CAT (Requires TB 1.13)
- CEN-ISERVER and CEN-IDOCV (Requires TB 1.13 for Firmware Loading)
- TPS-17G-QM
- IPAC (Requires TB 1.13 for Front Panel Project Load)
- CEN-RFGW-EX and MLX-2 (Requires TB 1.13)
- CEN-RGBHV32x32A, CEN-RGBHV32x32V
- QM-TX2-CC and QM-TX2-MC
- GLX-DIMFLV8 and GLXP-DIMFLV8
- Fixes
- Added protection against max project size for TPMC panels (Requires TB 1.13)
Engraver
- Added support for TPS-6X White.
- Synchronized panel ids within ProgrammableButtons table with panel ids within Engraver Definitions table.
- Created new column within Buttons table called CrestronFontHeightMM to hold the height of the Crestron Transport font for the specified area.
- Populated the font heights within the Buttons table for both ArialFontHeightMM and CrestronFontHeightMM for all engravable and non-engravable panels.
Fixes/Changes from 20.03.009 to 20.03.013:
Library Update v576
- IPAC changes:
- Correct COM1 and COM2 to show proper I/O
Fixes/Changes from 20.03.002 to 20.03.009:
Library Update v572
- IPAC changes:
- Show 4 relays instead of 2.
- Add "ScreenBrt" to button slot to control the screen brightness.
- Add "CEN-HPRFGW Link State" extender to CEN-HPRFGW (Cresnet & Ethernet) devices. This extender will allow a programmer to tell the state of RF devices that exist under the gateway. This is similar in scope to the "Offline Managers" that exist for devices, however in this case, it is a property of the gateway rather than individual devices.
Fixes/Changes from 20.02.010 to 20.03.002:
Library Update v571
- Allow IM Wizard to program devices on TCP/IP Clients
- Expose IPAC control system model
- NOTE: Toolbox support for the IPAC will be in a forthcoming database.
- Expose QM-WCC-2 model
- Expose QM-WMC-VCC model
VTPRO-e
Toolbox
- Added basic support for the following devices:
- QM-WMC-2
- QM-WMC-VCC
- GLXP-SW10
- Fixed typo in data for DIN-1DIMU4
Engraver
- Added new ClassID column within EngraverDefinitions table that will be used by the Engraver Application to create new panels based on old panel types.
- Entered font and line spacing height within the Buttons table for the following panels:
- MPC-M10
- MPC-M20
- MPC-M25
- TPS6X
- WPR48
- Entered CLW Blank bezel information within BezelFinishes table in support of the Engraver Application to be able to automatically switch bezel information between Blank and Engraved bezels.
Fixes/Changes from 20.02.009 to 20.02.010:
VTPRO-e
- Support for Property Grid for all objects (Requires VTPRO-e 3.9.03 or later)
- Enabled Subpage Z-Order feature in Compile Properties for TPMC-4X & TPMC-4XG
Fixes/Changes from 20.01.002 to 20.02.009:
- Fix Digital Signing of Install Packages
Library Update v570
- Add Toolbox Verification support for XPanel
- Add Firmware name "C2N-IRGWF" to C2N-IRGW for Toolbox verification
- Add GLX-HSW8
- Add GLXP-SW16
- Add GLXP-SW10
- Add GLXP-HSW12
- Add GLXP-HSW8
- Add "Intercom Basic" extender to TPMC-8X, TPMC-8L
- Correct issue with loading programs containing older versions of CHV-TSTATRF
VTPRO-e
Toolbox
- Added basic support for GLX lighting modules.
- Remove popup message referring to erroneous firmware for AMS-AIP
Engraver
- Added new Cameo colors (Dusk, Latte, Brown, Gray, Ivory and Dark Almond) within PanelDef.mdb and EngraverDef.mdb.
- Changed button and panel data for WPR48.
- Added new metafile images for WPR48.
- Appended "-5" to the HTTB10X model ID which defines a tree of 5 buttons.
Fixes/Changes from 20.00.011 to 20.01.002:
Library Update v567
- Add Poll Manager Extender to C2N-DAP8, C2N-DAP8RC
- Add Packet Transmission Extender to C2N-DAP8, C2N-DAP8RC
- CNX-DVP4/C2N-DVP4DI Touch In Format Extender:
- Change Inputs to 3 Serial strings from 16 Serial Strings
- Rename serial string 3 "TouchThePCv2" from "serial3"
- Update TPS-G-TPI Ethernet/Cresnet to have 4000 Serial Outputs
- Update TPS-GA-TPI Ethernet/Cresnet to have 4000 Serial Outputs
- Add "SMART Technologies Reserved Join Extender" to the following panels:
- TPS-G-TPI Ethernet/Cresnet
- TPS-GA-TPI Ethernet/Cresnet
- DVPHD Ethernet/Cresnet
- Update CHV-TSTATRF:
- Add Analog Inputs to "TSTATRF Heat/Cool Control" subslot:
- AutoHeatSetpoint
- AutoCoolSetpoint
- SchedAuto1ptSetpoint
- Add Analog Outputs to "TSTATRF Heat/Cool Control" subslot:
- AutoHeatSetpoint_F
- AutoCoolSetpoint_F
- Add Digital Outputs to "TSTATRF System Configuration" subslot:
- AutoModeEnabled
- SingleSetpointAutoEnabled
- Add Analog Outputs to "TSTATRF System Configuration" subslot:
- MinSingleAutoSetpoint_F
- MaxSingleAutoSetpoint_F
- AutoDeadband_F
- Change Relay card in DIN-AP2 to be labled as 4 in stead of 8 relays (the model was correct, just the Hint and Name were wrong)
Toolbox
- Merged changes into Device Database trunk for Toolbox:
- CLS-C6(M)(RF) - Added serial passto support for iLux devices. Allows some operations to children devices.
- CLS-C6RF - Fixed timeout issue when reporting children cresnet devices.
- MPC Control Systems - Added CSlave support. Doing so also allows Device IDs section in System Info to appear allowing cresnet ID changes.
- TPS-6X - Fixed version requirement for low battery protection. Was a typo, correct version 3.001.0016 is now entered.
- DIN-AP2 - Added initial support.
- CLI-xxxN-4 - Was missing support.
- Requires Toolbox 1.12.133:
- CEN-TRACK and AMS(-AIP) - Corrected TSID errors shown in network trees.
- TPMC-8X - Only show the docking station info when docked. Was showing all the time with errors if not docked.
- QM-RMC(RX)(BA) - Fixed bug with auto-negotiation setting.
Engraver
- Fix engraving issues with TPS-4L
Fixes/Changes from 20.00.010 to 20.00.011:
Library Update v565
- Correct issue where MPC-M10 and MPC-M20 were showing the incorrect number of relays in SIMPL Windows Config Manager
Fixes/Changes from 20.00.009 to 20.00.010:
Engraver
- Added support for programmable buttons for MPC-M20
Fixes/Changes from 20.00 to 20.00.009:
Library Update v564 (Changes from 558)
- Correct HelpID for Defargs to correct module help issues. Note that if you need help for the define arguments when writing a module, you should look up define arguments in the help index. This will be resolved with v2.11 of SIMPL Windows.
- Expose the following devices:
- TPS-6X (Cresnet, Ethernet, IR, and RF Models)
- CEN-HPRFGW (Ethernet and Cresnet Models)
- e-Control SDK for Adobe Flash
- MPS-250
- DIN-AP2 (Control System, Cresnet Slave, and Ethernet Slave models)
- DIN-IO8
- DIN-2MC2
- DIN-1DIMU4
- DIN-4DIMFLV4
- DIN-AO8
- DIN-8SW8
- MPC-M10 (Control System, Cresnet Slave, and Ethernet Slave models)
- MPC-M20 (Control System, Cresnet Slave, and Ethernet Slave models)
- MPC-M25 (Control System, Cresnet Slave, and Ethernet Slave models)
- CLS-C6RF
- Add "CNWM-10" firmware name to CNWM-10A button panel so Toolbox can verify it.
VTPRO-e
Toolbox
- New Device Support
- TPS-6X
- CEN-HPRFGW
- MPC Control System Line
- MPS-250
- TPMC-4XG
- DIN Lighting
- CNWMBG-10 - Legacy device but was missing TB support.)
- Bug Fixes
- CLS-C6RF - Reboot Timeout
- PAC2M - Reboot Timeout.
- TPS-6L - Fixes for Program Tree verification.
- CEN-UPS
- Fixes for log retrieval (Req TB 1.11).
- Fixes for Roomview Support (Req TB 1.12).
- AMS-AIP
- Fixes for Pro Sound Tools
- Fixes for timeouts after loading OSD projects (Req TB 1.12)
- MPS-300 - Fix for Audio Config tool, Mic compression range.
- Corrected some support for CEN-TRACK
Engraver
- Added EngraverDef.mdb in support for Engraver version 4.0 and higher
- Added DIN-Rail/MPC/MPS-250 support in EngraverDef.mdb
General
- Install process now uses default browser instead of IE specifically.
- Release notes are now available from Crestron Database in start menu.
Fixes/Changes to 20.00:
- Initial Device Database Release
