Crestron Database Release Notes

Introduction

The Crestron Database represents data for the advanced programming applications such as D3Pro and SystemBuilder. The data consists of module files, mdb control files, and other necessary files needed in support of these applications.
The following sections are available in the release notes:

General Notes and Issues

New Features/Bug Fixes

Known Issues:

Fixes/Changes from 33.00.001 to 33.01.004.01:

Added Support:

Fixes/Changes from 32.05.005 to 33.00.001:

Added Support:

SystemBuilder and SystemBuilder BOM:

Fixes/Changes from 32.00.001 to 32.05.005:

Added Support:

SystemBuilder BOM:

IP Modules:

Serial Modules:

Fixes/Changes from 31.05.009 to 32.00.001:

Added Support:

Fixes/Changes from 31.00.005 to 31.05.009:

SystemBuilder Support:

D3 Pro Support:

Added Support:

IR Driver:

Serial Devices:

Samsung PN series plasma TV's:

Samsung UN series LED TV's:

IP Devices:

Fixes/Changes from 31.00.004 to current:

Fixed:

DMPS-300-C Module update

Fixes/Changes from 30.05.014.01 to current:

Added:

DMPS-300-C Module Updates

Fixes/Changes from 30.01.004 to current:

Fixed:

Added:

IR Devices:

Security Devices:

SystemBuilder:

D3 Pro:

Fixes/Changes from 30.01.000 to 30.01.004:

Added:

D3Pro Support:

Fixes/Changes from 30.00.000 to 30.01.000:

Notes:
In the past, SIMPL Windows treated all of Crestron's "generic input" ports as the same. That is, it didn’t distinguish between a Versiport and, say, the inputs on the PAC2M (which only accept a dry contact). The result was that tools like D3 Pro and SB would allow the user to place Crestron occupancy sensors onto ports that physically could not support them.

This change in this version of the Device Database should fix the problem, where now devices should be better matched to the input ports.

Crestron’s occupancy sensors should now only be allowed to drop onto Versiports, or other ports designed specifically for them (e.g. the occupancy sensor inputs on the GLPAC).

Fixed:

Startup issue for the following:

The following devices are no longer permitted to be dropped on digital inputs:

Note: For the above fixes, Device Database version 40.00.001 and up is required

Added

SystemBuilder Support

SystemBuilder BOMs

D3Pro Support

D3Pro BOM

Fixes/Changes from 29.05.000 to 30.00.000:

Fixes:

Updated IR Driver:

Added the following Prodigy Compliant devices:

Fixes/Changes from 29.02.000 to current:

Fixes

Added the following devices for use in Prodigy Systems:

Updates made to the following IR Devices:

Added the following IR Devices:

D3Pro Support:

Fixes/Changes from 29.01.000 to current:

Fixes

Prodigy Composer support:
TV/Projector Lifts:

Screens:

Prodigy Compliant IR devices:

Fixes/Changes from 29.00.000 to 29.01.000:

SystemBuilder Support

D3Pro Support

Added Prodigy Compliant devices

BOM Support

Fixes/Changes from 28.05.017 to 29.00.000:

D3Pro Support

SystemBuilder Support

IR Device Updates

IR Devices Added

BOM Support

Fixes/Changes from 28.05.000 to 28.05.017:

D3Pro Support:

SystemBuilder Support:

Prodigy Certified IR Devices:

BOM support:

Fixes/Changes from 28.00.000 to 28.05.000:

SystemBuilder Support:

D3Pro Support:

Fixes/Changes from 27.05.000 to 28.00.000:

SystemBuilder Support

DM Wrapper Module support:

BOM support:

IR File updates for all IR Drivers Add new I2P Aspen Modules Added ADMS support to the PLX3

Fixes/Changes from 27.00.000 to 27.05.000:

SystemBuilder Support

BOM Support

Fixes/Changes from 26.05.000 to 27.00.000:

Updated IR Drivers -- Boxlight MP65E -- Boxlight X Series -- JVC DVD -- Onkyo Surround Sound AV Receivers --- DR-MV150 --- TX-DS494 --- TX-SR573 --- TX-SR600 --- TX-SR603X --- TX-SR700 -- Samsung HT-BD1250 (BD) -- Samsung HT-BD1250 (TV) -- Sharp Aquos -- Sony VPL-EX3 -- Sony VPL-FX30 (Mode 1) -- Sony VPL-FX30 (Mode 2) -- Sony VPL-VW85 -- Xbox 360 -- Yamaha RX-V667 -- Zinwell ZDX-7000

Module Updates

SystemBuilder

Fixes/Changes from 26.00.000 to 26.05.000:

Blu-ray Device Updates:

Updated IR drivers:

SystemBuilder support added for:

Fixes/Changes from 25.05.000 to 26.00.000:

SystemBuilder:

D3 Pro:

Fixes/Changes from 25.00.000 to 25.05.000:

SystemBuilder:

Fixes/Changes from 24.05.000 to 25.00.000:

SystemBuilder:

D3 Pro:

Fixes/Changes from 23.05.000 to 24.05.000:

SystemBuilder

Fixes/Changes from 23.00.000 to 23.05.000:

SystemBuilder

Fixes/Changes from 22.05.000 to 23.00.000:

SystemBuilder

Fixes/Changes from 22.01.000 to 22.05.000:

SystemBuilder

D3 Pro

Fixes/Changes from 22.00.000 to 22.01.000:

SIMPL

SystemBuilder

Fixes/Changes from 21.05.000 to 22.00.000:

D3 Pro

SystemBuilder

SIMPL

Fixes/Changes from 21.04.000 to 21.05.000:

D3 Pro

SIMPL

SystemBuilder

Fixes/Changes from 21.03.000 to 21.04.000:

SystemBuilder

D3Pro

SIMPL

Fixes/Changes from 21.02.000 to 21.02.018:

Please keep in mind that in order to use the new device PAMP-4X100 you will also need to install Device Database version 26.00.005.

SystemBuilder

D3Pro

Fixes/Changes from 21.00.000 to 21.00.006:

SystemBuilder

Fixes/Changes from 20.09.000 to 20.09.003:

Simpl Windows

SystemBuilder

Fixes/Changes from 20.08.001 to 20.08.004:

Simpl Windows

SystemBuilder

Fixes/Changes from 20.07.001 to 20.07.012:

Simpl Windows

SystemBuilder

Fixes/Changes from 20.06.001 to 20.06.049:

SIMPL Windows

SystemBuilder

Fixes/Changes from 20.04.006 to 20.05.016:

SIMPL Windows

SystemBuilder

D3Pro

Fixes/Changes from 20.03.009 to 20.04.006:

SystemBuilder

SIMPL Windows

Fixes/Changes from 20.02.013 to 20.03.009:

D3Pro

SIMPL Windows

SystemBuilder

Fixes/Changes from 20.01.008 to 20.02.013:

SystemBuilder

SIMPL Windows

Fixes/Changes from 20.00.015 to 20.01.008:

SystemBuilder

SIMPL Windows

D3 Pro

Fixes/Changes from 20.00.010 to 20.00.015:

D3Pro

SystemBuilder

SIMPL Windows

Fixes/Changes from 20.00.001 to 20.00.010:

D3Pro

SystemBuilder

SIMPL Windows

Fixes/Changes to 20.00.001:

Prior Crestron Database Release Notes

Version 19.09
  • Added MPC support for SystemBuilder
  • Recategorized Adagio modules into categories per processor (AMS/AMS-AIP/AES/AADS/AADS-XM)
  • Added database entries for MPC control systems (MPC-M25, MPC-M20, MPC-M10)
  • Added database modules for MPC-M25 control system and front panel buttons
  • Makes it simpler to program display warm up and cool down times in SystemBuilder for AMS and AMS-AIP systems
  • Added Policy Server module for Adobe e-Control interface

Version 19.08
  • APAD AAS (Simple Browse Context) GUI Interface (Non-Adagio) v1.0.cmc - correction for "no driving source" warnings during program generation
  • Fixed a problem with SystemBuilder synchronization not working correctly for Device ID, Source ID, and Net ID fields in AMS and AMS-AIP systems
  • Fixed a logic wave overflow problem when generating AMS-AIP systems with more than 21 rooms
  • Re-categorize the Symbol Tree for AMFM/SIRIUS/XM (CEN-TRACK) Hardware Interface to show up in "Tuners" instead of "Adagio"
  • Re-categorize the Symbol Tree for the Touch Panel (CEN-TRACK) Tuner GUI/Hardware Interface, APAD (CEN-TRACK) Tuner GUI/Hardware Interface and SystemControls modules to be set to "0" or hidden since it is only used in SystemBuilder
  • For SystemBuilder, "Enable_Browsing" is enabled by default on startup in the Touch Panel (CEN-TRACK) Tuner GUI Interface and APAD (CEN-TRACK) GUI Interface modules
  • Fixed issues with SideShow support for On-Screen Display and Adagio Front Panels in SystemBuilder
  • Added full support for TPMC-4XG

Version 19.07
  • Added support for MPC and MPS-250

Version 19.06
  • Added Generic Analog Input (analog_input_x1.cmc)
  • Added Generic Digital Output (dig_output_x1.cmc)
  • Added Photocell Sensor (photocell_analog_v1_1.cmc)
  • Added support for TPMC-4XG within PanelDef
  • Added support for DVPHD firmware version 3.001.0027
  • Added support for Crestron SideShow
  • Release D-NAV object for TPMC-8X, TPMC-8L, TPS-12, TPS-15, TPS-17, TPS-12G-QM, TPS-15G-QM, TPS-G-TPI, TPS-GA-TPI and DVPHD Panels.

Version 19.05
  • Enabled Engraver view for the QMMD 4X4, and QMMD 16X16

Version 19.04
  • Added SIMPL Windows support for AMS-AIP
  • Fixed C2N-TXM used with APADs
  • Fixed APADs with the AAS on AADS systems
  • Bug fix for D3Pro caused by cresdb 19.04.07 - Unable to add Fluor. Dim Loads or open an existing project containing such load types.

Version 19.03
  • Added Crestron Modules, Simpl+ and Database entries for AMS-AIP support.

Version 19.02
  • Update to c2n-sdc shade control module

Version 19.01
  • Added support for new keypads: HTT-B10X, C2NI-CB, INET-CBD, and INETI-CB
  • Updated modules: TSTAT w/5-2 Scheduler, THSTAT w/5-2 Scheduler, TSTATRF w/5-2 Scheduler
  • D3Pro database entry: Added support for startup delay of a switched non-lighting load on CLX-4HSW4

Version 19.0.8
  • Added MPS-300 Protected Modules.
  • Fixed: Crestron C2N-TXM Hardware Interface v2.0.cmc. After program upload or reset, incorrect power state of device was possible. Added ability to detect and then power cycle in this error state.

Version 19.0.7
  • Added support for the C2N-CB-TS. Note: D3Pro v2.5.5 or later required. System Builder v3.03 will only generate default keypad parameters and will ignore the settings chosen in the keypad properties menu. Non-default values must be set manually in the generated simpl windows program.
  • Engraver support for the MPS-300.

Version 19.0.6
  • Fixed: AES front panel was including the wrong XM module.
  • Fixed: Engraver was causing SystemBuilder to incorrectly assign programmable hard-buttons on the TPMC-8L.
  • Fixed: cnctrl2.mdb was wrongly packaged as read-only.

Version 19.0.5
  • Added full support for CEN-IDOC Search feature. Note: Feature requires firmware version 1.003.0021 or higher.
  • Added additional Engraver support.

Version 19.0.4
  • Internal Fixes.

Version 19.0.3
  • Added full support for RGBHV switchers
  • Added TPS-6L Cresnet, Ethernet for SB and D3 Pro
  • Engraver support for C2N-CB-T,S
  • CHV-TSTAT and CHV-THSTAT modules v3.2
    • includes a bug fix and new direct setpoint signals
  • Wrapper module for C2N-CB-TS for use in System Builder and D3Pro
  • Added scrolling list for AM/FM channels or presets
  • Allow multiple touch panels to have independent browsing on the same AM-FM tuner.
  • Added scrolling list support for Adagio Large TP AMFM GUI Interface v2.1 and/or Adagio Small TP AMFM GUI Interface v2.1 modules.

Version 19.0.2
  • Added limited support for RGBHV switchers
  • Added iMedia output cues:
    • System_Ready_Pulse
      • Pulses when the system program has finished initializing
    • Supports_IM-RXVx-M
      • High if the "Version" console command reports back IM-RXVx-M.
      • Low for non -M units.
    • Show_Master_Volume_Subpage
      • High if "Knob is Master" feedback and "Support_IM-RXVx-M" are both high.
      • High for non -M units.
    • Show_Program_Volume_Subpage
      • High if "Knob is Master" feedback is low and "Support_IM-RXVx-M" is high.
      • Low for non -M units.
  • Store BOM Group IDs for iMedia transmitters in control database for SystemBuilder iMedia Wizard.

Version 19.0.1
  • Internal fixes.

Version 19.0.0
  • Add support for IM-RXV-M
  • SystemBuilder: AAS day 3 support added. NOTE: This requires AAS firmware version 3.0.1359.0 or later.
  • Engraver: Change font used for TPMC-8L

Version 18.9.0
  • Add support for new TPMC-8x features. NOTE: firmware update 1.00.01.29 or newer is required. See TPMC-8x firmware update release notes for details about these new features.

Version 18.8.8
  • SystemBuilder: Add support and Bill of Materials entries for TPMC-8L.
  • Updated AMS related modules/protected modules:
    • Adagio Large TP iPod GUI Interface v1.0.cmc
    • Adagio Theater v1.0.cmc
    • 12-Button Keypad GUI Interface v1.2.cmc
    • Adagio 11-Source Room v1.0.cmc
    • Adagio Theater Room Control And Setup v1.1.cmc
    • Adagio Large TP Sirius GUI Interface v2.0.cmc
    • Adagio Small TP Sirius GUI Interface v2.0.cmc
    • Crestron C2N-TXM Touch Panel Interface v2.0.cmc
    • Crestron C2N-TXM Small Touch Panel Interface v2.0.cmc
    • AMS OOTBF XML Functions v1_1.csp/csh
  • New AMS modules:
    • Adagio Theater Room Control And Setup v1.2.cmc
    • Adagio Theater 12-Button Keypad GUI Interface v1.2.cmc
    • Simple Decoding Mode Selector v1.csp/csh
  • Updated lighting/HVAC modules:
    • CLX-4HSW4_v1_0.cmc
    • CLX-2DIM2_v1_0.cmc
    • CLX-1MC4_v1_0.cmc
    • CLX-1DIM4_v_2.cmc
    • CLX-1DIM8_v_1.1.cmc
    • chvtstat_sked_v3_0.cmc
    • chvtstat_nosked_v3_0.cmc
    • chvthstat_sked_v3_0.cmc
    • chvthstat_nosked_v3_0.cmc
    • tstat scheduler2_v2_0.csp
  • Engraver: Add support for QM-MD16x16 printed labels.
  • Bill of Materials: Corrected database to address these issues that may occur when changing bezel colors:
    • Engraver application bezel image flashes briefly after color change
    • Engraver appliaction bezel image does not always match selected color.
    • Order includes incorrect bezel part number after a color change.

Version 18.8.7
  • Updated AMS theater control modules
  • Updated CHV-TSTATRF modules
  • Updated IM-RX1 and IM-RX3 modules
  • Add C2N-SDC-DC modules
  • Panel definitions: Correct issue where TPS-4000L reserved joins were not shown in VT-Pro-e.

Version 18.8.6
  • Updated AMS related modules and protected modules
    • AMFM2 Hardware Interface v2.0.cmc
    • AMFM Hardware Interface v2.0.cmc
    • Adagio (AMS) Large TP Room GUI Inteface With Theater v2.1.cmc
    • Adagio (AMS) 12 Button Keypad Interface v1.cmc
    • XM Guide Engine.csp/csh
    • Adadio System Info v1_3.csp/csh

Version 18.8.5
  • Panel Definitions: Add TPMC-8L support
  • Updated AMS related modules and protected modules
    • Adagio (AMS) Source Start+Stop v1.cmc
    • Adagio (AMS) Source Start+Stop v2.cmc
    • AMS OOTBF Theater Mode v1_0.csp/csh
    • Adagio (AMS) Start+Stop Processor v1.csp/csh

Version 18.8.4
  • Panel Definitions: Corrected vertical coordinates for engraveable version of AMS front panel.
  • Updated Vetra Wedge module
  • Assigned correct template type for TSTATRF with no scheduling
  • Updated AMS related modules

Version 18.8.3
NOTE: Do not use AMS in SystemBuilder unless you have SystemBuilder 3.x or above, even though AMS may be visible in earlier versions of SystemBuilder.

NOTE: If you are programming AMS in Simpl Windows, the AMS modules in this database are not the final versions. Please get Crestron database 18.8.4 or later.

Version 18.8.2
  • Updated AMS related modules
  • MPS-200 updated modules
  • SW-WMC module fix
  • Add support for DVPHD
  • Add new IR files:
    • Apple .. Apple TV
    • CaVS .. CaVS Karaoke
    • Clo systems .. X-Arm plasma mount
    • Crestron .. AAS-1/AAS-2/AAS-4
    • Crestron .. iLux
    • Denon .. DN-200
    • Denon .. DVD 557
    • DishNet .. ECHOSTAR 143029
    • DishNet .. VIP622 DVR
    • Electrocompaniet .. 24/192
    • Epson .. PowerLite 81p Multimedia Projector
    • Generic .. fdc-3412
    • Hitachi .. 42HDX99
    • Hitachi .. CMP-4221
    • Hitachi .. P50H401
    • HP .. Media Center Control
    • Insignia .. Unknown
    • JVC .. JVC-HR-XVC16B
    • Kenwood .. Sirius Receiver
    • MICROSOFT .. XBOX360
    • Motorola .. BMC 9012
    • Motorola .. COMCAST DCT6412
    • Panasonic .. AGVP310
    • Panasonic .. DVD Video Recorder DMR-E85H
    • Panasonic .. Unknown
    • Panasonic .. Unknown
    • Panasonic .. Unknown
    • Pioneer .. DV-46AV
    • Pioneer .. DVR-640H-S
    • Pioneer .. IDK-01
    • RiTECH .. RJ-200BK
    • Rotel .. RT-1084
    • Russound .. ST2S Smart Tuner
    • Samsung .. BD-P1000
    • SOLE .. SLTV15MS1K
    • Sony .. DA-3100ES
    • Sony .. DSR-11
    • Sony .. Sony RDR-VX515
    • Sony .. STR-DA3100ES
    • Sony .. STR-DA3100ES
    • Sony .. Unknown
    • Sony .. Unknown
    • Toshiba .. HDA2
    • Universal Electronics .. Cox Universal Remote Control
    • Viewsonic .. RC00070P
    • Xiva .. Integra

Version 18.8.1
  • Updated AMS related modules
  • SystemBuilder: Added support for CLX-1DELV4 lighting device\

Version 18.8.0
  • Add modules and resources to support inital release of AMS.
  • Add resources to support initial release of DVP-HD.
  • Updated QM-MD7x2 control module to address audio breakaway issue when 7x2 is only using one output
  • D3Pro: Enable support for playing sound files on CNX-B keypads
  • Engraver: Add support for AMS
  • SystemBuilder: added support for TPS-GA-TPI (Cresnet) and TPS-GA-TPI (Ethernet) touchpanels

Version 18.7.9
  • MPS-200 support for SystemBuilder. Requires SystemBuilder version 3.2.11
  • Enabled the following Adagio modules used for AES/AADS system creation
    • APAD Interface v1_0_1.cmc
    • Adagio Room Control and Setup v1.1.cmc
    • Adagio Room Control and Setup v2.0.cmc
  • Corrected database entries to address cases where a SystemBuilder AES project would not build correctly.
  • Bill of Materials:
    • Updated entries related to MPS-200.
    • ABAR added as accessory for Adagio Control Systems and CNX-PAD8A
  • D3Pro database entries:
    • Corrected entries to address bug when adding 24vdc drapes to C2N-SDC-DC.

Version 18.7.8
  • Updated MPS-200 related modules to support inital release.

Version 18.7.7
  • Updated MPS-200 related modules.
  • VTPro-e: Corrections to panel definition file to address:
    • Issue where reserved joins for TPS-2000 would appear more than once in the same VTPro-e pull down list.
    • TPS-6000 not showing in VTPro-e panel list.

Version 18.7.6
  • Updated MPS-200 related modules
  • VTPro-e:
    • Changes for TPMC-4x: Z-order change, Ethernet autodiscovery NOTE: TPMC-4x firmware version 1.00.28.00 required to use these features
    • Changes for TPMC-8x: Z-order change, Dynamic graphics aspect ratio support, updated reserved joins. NOTE: TPMC-8x firmware version 1.00.01.10 required to use these features
  • SystemBuilder:
    • Updated Bill of Materials list
    • Updates to event scheduler modules.
    • Updated Adagio control/interface, Adagio tuner and APAD related modules to support new AES feature set. Refer to 18.7.0 section below for more details about new AES features.
  • Engraver
    • Add support for DVPHD

Version 18.7.5
  • Updated MPS-200 related modules/protected modules

Version 18.7.4
  • Updated XM related modules
  • SystemBuilder
    • Adagio control/interface, Adagio tuner and APAD related module updates to support new AES feature set. Refer to 18.7.0 section below for more details about new AES features.
    • Updates for AES front panel protected modules

Version 18.7.3
  • SystemBuilder
    • Updated Adagio control/interface, Adagio tuner and APAD related modules to support new AES feature set. Refer to 18.7.0 section below for more details about new AES features.
    • Updated Bill of Materials list
    • Updated MPS-200 related modules/protected modules
    • Updated CHV-TSTATRF module
    • Updated Motion Sensor module; now supports longer delay times.

Version 18.7.2
  • SystemBuilder
    • Updated Adagio control/interface, Adagio tuner and APAD related modules to support new AES feature set. Refer to 18.7.0 section below for more details about new AES features.
    • Updated MPS-100 modules/module help for SystemBuilder support.

Version 18.7.1
  • VTPro-e
    • Allow user defined join assignment for MT-1000 hard keys
  • SystemBuilder
    • Updated Adagio and APAD related modules.
    • Updated MPS-100 and MPS-200 modules

Version 18.7.0
  • SIMPL Windows
    • Add support for MPS-200
  • SystemBuilder
    • Add support for MPS-100
  • New AES related features:
    • Optional Group Volume Control
    • Line-Level Audio control
    • Priority Mode
    • Interrupt and Resume features

Version 18.6.2
  • Update for CHV-TSTATRF module
  • Changes to Event Scheduler 2 module:
    • Suspend flag is now saved as part of each event
    • fixed bug where multiple Saves could eventually corrupt data file
  • Engraver
    • Add support for MPS-200.
    • New colors for CLW series. NOTE: Requires Engraver 3.4.0.3 or later.

Version 18.6.1
  • Updated/New ATC-AMFMSR related modules
  • Updated ATC-AMFMSR Bill of Materials entries

Version 18.6.0
  • Add support for new device: ATC-AMFMSR
  • IMedia Wizard: Add support for IM-FTCC-V and IM-WCCV

Version 18.5.0
  • Add support for new devices:
    • C2N-MNETRPRT
    • TPS-GA-TPI
    • CHV-TSTATRF
    • CEN-TIA
  • Updated C2N-RTHS module
  • SystemBuilder
    • Updated WPR-48 modules
    • Updated MPS-100 related modules

Version 18.4.5
  • SystemBuilder:
  • Add AADS support
  • Updated Adagio Large TP Room GUI Interface - Fixed an issue with volume subpage not displaying on smaller touch panels
  • Updated Adagio Large TP AAS GUI Interface - Fixed logic for Back button so that it only appears on the AAS Browse and Playlist Manager pages
  • Updated Adagio Room Control and Setup - Fixed source gain control/feedback synchronization
  • Updated QM volume handler module

Version 18.4.4
  • Updated MPS-100 protected modules and SystemBuilder support
  • Modified "Vacation Scheduler" module (used by D3 Pro) to read/write from disk more efficiently

Version 18.4.3
  • Updated 2 lighting modules: CLX-1DIM8 and CLX-1DIM4
  • Updated MPS-100 related Simpl+ module
  • Added new MPS-100 related modules
  • Updated MPS-100 protected modules
  • VTPro-e support: Updated reserved join list

Version 18.4.2
  • Updated CHV-TSTATRF modules
  • Updated system module for D3Pro support

Version 18.4.1
  • Updated MPS-100 protected module
  • Updated other MPS related SIMPL+ modules
  • Updated several Adagio tuner modules
  • Add new module: APAD Long Text Edit.csp

Version 18.4.0
  • New module for CHV-TSTATRF
  • Updated CEN-TIA module
  • New version of MPS-100 protected module
  • Corrected many SIMPL+ CSH files. Fix corrects invalid parameter block in some SIMPL+ CSH modules causing SIMPL Windows compile errors about "partial subsitution". See SIMPL Windows release notes for details regarding user SIMPL+ modules.
  • SystemBuilder:
    • Add support for: TPMC-15-QM, TPMC-17-QM, TPS-15G-QM, TPS-G-TPI
    • Fixed MPS-100 "connection point" bug.
    • Updated device support modules
  • Engraver: Add support for MPS-100
  • VTPro-e:
    • Removed ST-4T/8T panel types. Use VTPro-e 2.2.3.6 or earlier for SmartTouch programming support. See VTPro-e release notes.
    • Updated TPMC8x reserved join list.
  • D3Pro: Fixed bug where some Cameo keypad buttons would appear with no feedback. NOTE: This will not fix existing projects. To fix an existing project, create a new keypad and copy logic from the original one, then delete the original.

Version 18.3.3
  • SystemBuilder support: Updated AADS module help links

Version 18.3.2
  • VTPro-e support: Updated TPMC-8x reserved join list
  • SystemBuilder support: Assorted updates for AADS modules
  • SIMPL Windows support: Corrected Symbol Tree classifications for multiple modules

Version 18.3.1
  • VTPro-e support: Updated TPMC-8x reserved join list
  • SystemBuilder support: Updated Adagio modules

Version 18.3.0
  • VTPro-e support: Add TPMC-8x panel for initial release Update reserved join list for TPMC-8x embedded applications. This change is needed when converting TPMC-10 projects to TPMC-8x.
  • SIMPL Windows/ System Builder support: Updated AADS modules
  • SystemBuilder suppport (QuickMedia systems):
    • QM-FTCC-TPS4 device split into separate devices:
      • QM-FTCC-TPS4 (Cresnet TP)
      • QM-FTCC-TPS4 (Ethernet TP)
    • This change allows selection of the device with either the integrated Cresnet or Ethernet touchpanel

Version 18.2.7
  • Add module for AAS IR emulation
  • Updated control system database files to correct front panel issue when creating a new project for AES control system.

Version 18.2.6
  • Updated CEN-TIA module
  • Updated control system database files
  • Updated protected modules for Adagio support

Version 18.2.5
  • Updated CEN-TIA modules
  • Corrected control system database files for SIMPL/SystemBuilder support.
  • Updated WPR-48 wrapper modules for D3 Pro/SystemBuilder support.
  • Updated AADS modules
  • VTPro-e support:
    • Updated reserved join list

Version 18.2.4
  • VTPro-e support:
    • Updated TPMC-8x panel support/reserved join list
    • Enable dynamic graphics for TPS-G-TPI.
  • SIMPL Windows support:
    • Updated AADS modules
    • Updated QM-AE modules

Version 18.2.3
  • VTPro-e support:
    • Updated TPMC-8x panel support
  • Engraver suppport:
    • Updated part number list in database
  • SIMPL Windows support:
    • Updated AADS modules
  • Revised some Crestron QM and DAP8 Audio modules to fix signed values setting

Version 18.2.2
  • SystemBuilder support
    • Crssplus.dat updated to add the CEN-TIA modules
    • Updated the following modules within crsprtct.dat to address issue with hextoi function call
      • APAD iPOD GUI Interface v1.cmc
      • AMFM2 Hardware Interface v1.0.cmc
      • AMFM Hardware Interface v1.0.cmc
      • AADS Front Panel AMFM Tuner GUI Interface v1.cmc
      • AES Front Panel AMFM Tuner GUI Interface v1.cmc
      • APAD AAS GUI Interface v1.cmc
      • APAD AMFM Tuner GUI Interface v1.cmc
  • SIMPL Windows support
    • MPS-100 front panel module updated
Version 18.2.1
  • SystemBuilder support: Add support for
    • AADS
    • AADS-XM
    • TPMC-4X
    • CEN-TIA
    • PAC2M
  • D3 Pro support: Add support for PAC2M
  • VTPro-e support: TPMC-8X panel added.
  • SIMPL Windows support: Add support for MPS-100

Version 18.1.15
  • VTPro-e support: Enable dynamic graphics for TPS-12/15/17 panels.
Version 18.1.14
  • SystemBuilder bug fix for programmable keypads:
    • CN-WM
    • CNWM-LT9
    • CNWM-LU12
    • CN-WP12F
    • CN-WP12N
Version 18.1.13
  • SystemBuilder support:
    • additional AADS features, bug fixes
    • ST-1700CIR added
  • D3 Pro support
    • ST-1700CIR added

Version 18.1.12
  • SystemBuilder support:
    • added AADS support
    • changed default warm-up and cool-down times for Power On/Off Timeout extender
    • minor module bug fixes
Version 18.1.11
  • Release candidate for SystemBuilder
  • Adds support additional programmable buttons on MT-1000C
Version 18.1.10
  • Release candidate for SystemBuilder
  • Adds support for CNXRMIRD in SystemBuilder
  • Fixes bug that causes CH Audio Dist. ROOM Setup v2.6 (cm) to lose its settings on startup
  • Fixes Sleep Mode in SystemBuilder-generated Adagio systems
Version 18.1.9
  • Release candidate for SystemBuilder v3.0.10
  • Adds support for C2N-SPWS300 in SystemBuilder
  • Adds Real-Time support for C2(N)-VEQ4 in SystemBuilder
  • Adds "In-Override" output to CLX-1DIM4 modules for SystemBuilder
Version 18.1.8
  • Release candidate for SystemBuilder v3.0.9
  • Support for C2N-IADS30x24 in SystemBuilder
  • Support for C2N-IVDS24x24 in SystemBuilder
  • Corrects issues with third button of CLW-DIM4RF in detached mode
  • Fixes handling of multiple interface modules connected to CEN-IDOC Hardware Interface v1.0
  • Fixes problems with startup problems with Scrolling List module in SystemBuilder
Version 18.1.7
  • Release candidate for SystemBuilder v3.0.8
  • Optimizations in Adagio modules for use with SystemBuilder Real-Time mode
  • Support for pad areas on TPS-12
  • Support for SystemBuilder programming of Adagio Audio Zones and sources with independent browsing from many touchpanels and keypads. The following exceptions apply:
Audio Zone Exceptions: C2N-DBN12 CNX-BN12 QM-FTCC-TPS4 QM-FTSC (keypad)

Independent browsing of supported sources (CEN-IDOC, ATC-AMFMXM, AAS-1/2/4) is not available from keypads or one-way touchpanels.

Version 18.1.6
  • Fixes bug in QM modules which may prevent logic from stabilizing at startup
  • Fixes SystemBuilder connection to CN-AMPX16x60
  • Revised control entries for SystemBuilder support of ATC-AMFMXM
Version 18.1.5
  • Fixed D3Pro support for single-wide lighting cabinets broken in 18.1.3
Version 18.1.4
  • Support for CLX-1DIM8 and CLX-2DIM8 in SystemBuilder
  • Support for C2N-IRGW(-1G)
  • Revised Adagio modules for SystemBuilder support
    • AAS : Fixed "Play Now" feature of Playlist Manager mode
Version 18.1.3
  • Support for D3 Pro v2.2.6 or later
  • added some images for QM products used by SystemBuilder
Version 18.1.2
  • Fixed connection to second AM/FM tuner of ATC-AMFM2 in SystemBuilder
Version 18.1.1
  • Revised Adagio modules for SystemBuilder support
Version 18.1.0
  • Revised Adagio modules for SystemBuilder support
  • CLF-DIMRF support in SystemBuilder and D3Pro
Version 18.0.9
  • Revised Adagio modules for SystemBuilder support
Version 18.0.8
  • Added modules for the following products:
    • AES
    • AAE
    • APAD
    • AAS-1
    • AAS-2
    • AAS-4
    • ATC-AMFMXM
    • ATC-AMFM2
    • CEN-IPOD
  • Added SIMPL Windows support for (requires SIMPL Windows v2.07.21 or later): AES
  • bug-fix for real-time control in D3 Pro involving non-dim modules at certain Cresnet IDs
  • added D3 Pro support for TPMC-15-CH and TPMC-17-CH
Version 17.7.0
  • Added "dynamic graphic" support in VTPro-e for the TPMC-10
Version 17.6.2
  • Added support for PNG graphics for TPS-12, TPS-15, TPS-17
  • Fixes for D3 Pro/SystemBuilder wrapper modules for CLW-DIM(S)1, CLW-SW(S), and CLW-SW(S)1
Version 17.6.1
  • Fixed corrupted definition of C2N-FTB (could cause SystemBuilder crash)
Version 17.6.0
  • Added TPS-4L support to VTPro-e
  • Added Engraver support for TPS-4L
  • Modified Lightingdb.mdb to allow D3 Pro Module and Enclosure Wizard to run properly with D3 Pro v2.1.x
  • Fixed bug in certain QM receiver modules that prevented unmuting the volume when used with QM switchers
  • Added D3 Pro support for WPR-48, TPS-4L, MT-1000C
  • Added SystemBuilder support for TPS-4L, TPS-G-TPI
  • Changed default fade time of infiNET dimmers to 0.5s (when used with D3 Pro or SystemBuilder)
  • Fixed bug in T(H)STAT Scheduler (v2.0.x) modules where setpoints would not always recall if there was only one schedule programmed per day.
  • changed the maximum wattage allowed on a CLX-1DELV4 output in D3 Pro from 1080W to 1200W
  • Added modules to control the following projectors/monitors:
    • BenQ 8200/8220
    • BenQ 7200
    • Canon Realis SX-50
    • Digital Projection Mercury Series
    • Digital Projection DVision
    • Epson EMP-600, EMP-800, EMP-810, EMP-811, EMP-820
    • Epson EMP-7800, 7850
    • Epson 830P, 835P
    • InFocus LP-820
    • InFocus LP-640, LP-540
    • InFocus LP840
    • Hitachi CP-X443, CP-X445
    • Hitachi CP-SX1350
    • Hitachi CMP4202U, CMP4201, CMP4121, CMP4120, CMP402, W42-PD1
    • LG L3200/L3700/L4200
    • LG RU-42PX10, RU-42PX11, RU-42PX20, RU-50PX10, RU-50PX11, RU-50PX20
    • Mitsubishi HC2000
    • Marantz VP-12S3, VP-10S1
    • Mitsubishi XL-30U, XL-25U, SL-25U
    • NEC/Mitsubishi LCD3000/4000
    • Optoma H77/H79/H78DC3
    • Optoma H77, H79
    • Optoma EP759, EP758, EP751
    • Panasonic PT-D5500, PT-D7500, PT-D7600, PT-D7700, PT-DW7000
    • Panasonic PT-AE900U
    • Pioneer Pro-1410HD
    • Runco PL-50HDX
    • Samsung PPM42M5S, PPM42M5H, PPM50M5H, PPM63M5H
    • Samsung PPM42S3, PPM50H3, PPM63H3
    • Sharp XG-MB70X
    • Sony FWD-32LX1, FWD-42LX1
    • Sony PFM-42X1
    • Toshiba TDP-T40
    • Yamaha LPX-510
    • Yamaha DPX-1100
    • Yamaha DPX-1000
Version 17.5.2
  • Fixed Engraver bug where engraved text on CT-1000 and LC-1000 panels could be lost
  • Fixed Bill Of Materials bug where CLT-PWS75 was not being included with the CLX-PWS75
Version 17.5.1
  • Removed the following unsupported Cameo colors from Engraver: Wine, Brick, Olive
Version 17.5.0
  • Added VTPro-e support for:
    • UPX-2-1GB
    • UPX-2-MSO
  • Added Engraver support for the following products (requires Engraver v2.6.0.6 or later):
    • QM-FTCC-TPS4
    • C2N-FT-TPS4
    • all InfiNet switches and dimmers

Version 17.4.4
  • Correctly set the number of serial joins available in VTPro-e for the following panels: TPS-4L TPS-12/15/17 TPS-12/15-G-QM TPS-TPI-QM C2N-FT-TPS QM-FTCC-TPS4
Version 17.4.3
  • Internal changes to definitions of new TPS-B and TPS-G touchpanels
Version 17.4.2
  • Updated wrapper modules for the CLW-SWxRF models. Now exposes the "Delayed Off Timer" parameter in SystemBuilder and D3 Pro.
  • Fixed Bill Of Materials issue where CLW-xxxRF slaves were not being added to the BOM in D3 Pro or SystemBuilder.
  • SystemBuilder support for:
    • QM-FTCC-NB
    • QM-FTDC-NB
    • QM-FTMC-NB
    • QM-FTMCSC-NB
  • VTPro-e support for: TPS-G-TPI
Version 17.4.1
  • Added SystemBuilder, Bill Of Materials, VTPro-e support for:
    • TPS-12G-QM
    • TPS-15G-QM
    • C2N-FT-TPS4
    • QM-FTCC-TPS4
Version 17.4.0
  • Support for D3 Pro v2.0.x
    • Logic generation fixes for CLW-SW(S), CLW-SW(S)1RF, CLW-SW(S)4RF, CLX-4HSW4
    • Updated real-time control logic (now requires Toolbox)
  • Various Bill Of Materials database additions, fixes
  • Updated modules for CLW-DIMS4RF and CLW-SWS4RF to match latest SIMPL changes (requires SIMPL Library 354 or later)
  • VTPro-e and Engraver (requires v2.6 or later) support for:
    • C2N-FT-TPS4
    • QM-FTCC-TPS4
Version 17.3.3
  • Fix for TPS-2000, where programmable buttons were not showing in proper location in SystemBuilder and D3 Pro
  • Fix for CLW-DIM4RF and SW4RF modules which were missing default values for the "Local Control Button" paramter
Version 17.3.2
  • Fix for CLX-HSW4 in D3 Pro v1.5.x and later (non-dim lights could flash on briefly at startup)
Version 17.3.1
  • Added support for more cameo colors in Engraver, Bill Of Materials
  • Added support for infiNET dimmers/switches in D3 Pro, SystemBuilder
  • Fixed incorrect images in D3 Pro for CLX-2IND, CLX-4IND, and CLX-PWS75
  • Updated logic generation scripts for D3 Pro to support infiNET dimmers/switches and iLux
  • Added SystemBuilder support for the TPMC-10-DSW
  • Updated C2N-TXM module to be compatible with SystemBuilder templates
Version 17.3.0
  • Add Engraver support for CLS-C6
  • Fix problem with IM-RX1 module. Max volume was resetting to 50% after reboot.
Version 17.2.4 (Internal Alpha)
  • Added Versioning info to control db, lighting db to prevent older versions of SystemBuilder, D3 Pro from showing newer, unsupported products
  • Added D3 Pro support for the following products (NOTE: complete support is still in progress):
    • CLW-DIMxxRF
    • CLW-SWxxRF
    • CLS-C6(M) (iLux)
Version 17.2.3
  • Fixed lighting database bug that could cause D3 Pro crash
  • Fixed support for TPMC-17 panels
Version 17.2.2
  • Removed "system bar" for TPMC-15/17 and UPX/UPX-2(+)
  • Updated modules for IM-RX1 and IM-RX3
  • Fixed CNXRMCS entry in BOM
Version 17.2.1
  • Updated help for RoomView module
  • SystemBuilder Support:
    • QM-AE
    • QMRMCRX-BA
    • iMedia devices
  • Limited SystemBuilder and D3Pro support for C2N-CB (Cameo) keypads (no rocker functionality available via these apps)
  • Fixed bug where D3 Pro was not adding CLX-2DIM2 via Module Assignment Wizard
  • VTPro-e support for TPMC-15/17, TPS-12/15/17
  • Updated Bill Of Materials database to include latest products
Version 17.1.1
  • Updated for TSTAT and THSTAT scheduler modules (Firmware v2.xxx) to fix bug where a removed schedule could be recalled after midnight in some cases. Also added minor improvements.
  • Engraver support for C2N-CB (Cameo) keypad
  • Added module for using C2N-CB (Cameo) LEDs as a bargraph
  • Updated the hard-button joins for the MT-1000C in VTPro-e
  • Other updated SIMPL modules: Elmo TRV-35H Carrier ComfortZone RoomView QM Modules
Version 17.0.2
  • Fixed issue in Audio Distribution systems where devices could turn on after a system reboot "CH Audio Dist. SYSTEM Device Start and Stop v2.1"
  • Changed preferred lighting module to CLX-2DIM8 for D3 Pro Lighting Wizard (was CLX-1DIM8)
Version 17.0.1
  • updated SystemBuilder QM modules
Version 17.0.0
  • C2N-TFM/TTFVM now support US and Europe
  • Added support for AudioRequest Pro (firmware 1.9.0)
  • Includes THSTAT Scheduler module v2.1 which adds "HumidiferCall" input (connects directly to THSTAT device)
  • SystemBuilder-related additions:
    • Bug fixes
    • Support for remote slave Ethernet/Cresnet processors
    • Fixed C2N-DAP8 module so it connects to the Decoder_Volume signal
Version 16.4.4
  • Same as v16.4.3, except minor changes to CNCAMIDJ in Engraver
Version 16.4.3
  • Branch-release: this was really v16.4.0 with a fix for an engraver crash
Version 16.4.2
  • Fixed HP x8010 module which had an internally driven input
  • Added "Both_Shades_" commands to C2N-SDC and C2N-SSC-2 modules for use with D3 Pro
  • SystemBuilder-specific support
    • QM-FTSC
    • C2N-FTB
    • C2N-VEQ4
    • C2N-CAMIDSPT (placeholder only, module incomplete at this time)
    • Known issues:
      • 7x2 and 5x1 modules missing some cue help
      • Video sense outputs of origination points missing names for low states
      • C2N-CAMIDSPT module incomplete
      • Images for QM-TX missing for QM View
Version 16.4.1
  • Minor fixes for CHV-T(H)STAT scheduling modules (old and new firmware versions)
  • SystemBuilder-specific support:
    • added support for QM flip-top boxes
    • WPR-48 support
    • QM-MD7x2, QM-MD5x1, QM-MD4x2, QM-MD8x8 support
  • Added support for MT-1000C
Version 16.4.0
  • Added modules for C2N-SSC-2 and C2N-SDC shade/drape controllers
  • Added modules for C2N-TFM and C2N-TTVFM tuners
  • Updated versions of Crestron CHV-T(H)STAT modules (for v1.xxx firmware). These new versions include minor fixes/enhancements
  • Added help files for a number of logic modules in PDF (Adobe Acrobat) format
  • Changed Time Zone designation for Alabama and Arkansas cities to Central Time (was Eastern Time)
  • Changed Time Zone designation for Pensacola and Panama City, Florida to Central Time (was Eastern Time)
  • Touchpanel-related changes:
    • Added TPS-4000L support to VTPro-e/Engraver/D3 Pro/SystemBuilder
    • Increased number of digital joins on the STX-1700CXP to 4000 (was 999)

Version 16.3.4
  • Updated versions of CHV-THSTAT modules (minor bug fixes)
  • Updated firmware name prefix for TPS-3000/3100/4000 touchpanels
  • Modified lighting db so that the D3 Pro Module and Enclosure Wizard adds CLX-1DIM8s instead of CLX-2DIM8s
Version 16.3.2
  • Updated C2N-TXM module
  • Updated TSTAT modules for v1.xxx firmware to be compatible with new template pages
  • SystemBuilder support for CLW-xxx firmware v2.xx
  • Added support for: TPS-3100L TPS-4000/L
Version 16.3.0
  • Added support for CLW-DIM(S)1 and CLW-SW(S)1 dimmers/switches
  • Added support for the TPMC-10
  • Added new modules for the CHV-TSTAT and CHV-THSTAT with firmware v2.xxx
Version 16.2.3
  • Added WPR-48 support for Crestron Engraver software
  • Fixed bug where CLX-1FAN4 was being omitted from the BOM in D3 Pro (bug was introduced in v16.2.2)
Version 16.2.2
  • Added many new modules for Video Projector control
  • Adds CNPI-16B support to D3 Pro and SystemBuilder
  • Updated version of C2N-TXM module
  • Updated version of CLW-DIM module for use with AppBuilder and SystemBuilder
  • Engraver support for QM-FTSC, QM-MD4x2, QM-MD7x2, QM-MD8x8
  • VTpro-e support for the C2N-IIF (sound files only)
  • TPS-4000 support
Version 16.1.5
  • Updated QuickMedia modules
  • Updated standard command definitions for all "TV" and "TV Tuner" IR drivers
  • Bill Of Materials updates
Version 16.1.4
  • Updated QuickMedia modules
  • C2N-DAP8 module
  • C2N-TXM module
  • Improved CHV-TSTAT and THSTAT modules
  • Updated existing projector modules to be more "standard command" compliant
  • VTPro-e support for the ML-500 and C2N-IIF
  • New IR drivers
  • Engraver support for the following products: QM-MD8X8
  • Added support for the following interfaces in D3 Pro:
    • TPS-3000L
    • TPS=1700
    • STX-1700CXP
    • TPS-TPI w/Ethernet
Version 16.1.2
  • Reintroduced QuickMedia modules (for SystemBuilder support)
Version 16.1.1
  • Added Engraver knowledge of buttonless bezel for 1700-series touchpanels
  • Updated scheduling modules for CHV-TSTAT/THSTAT
Version 16.1.0
  • Added support for Media Manager plug-in in the SystemBuilder application
  • Added engraver support for buttonless 1700-series touchpanels
  • All IR drivers have been updated with new "standard command" info (the function names and IR data inside each driver have not been changed)
  • Added new Bill Of Materials database for use with SystemBuilder and future applications
  • Added/updated modules for the following video projectors
    • Barco iQ
    • Eiki LC-X986
    • Eiki LC-XG100
    • Epson 8300
    • Epson EMP-5600
    • Epson EMP-7600
    • Epson EMP-7700
    • Epson EMP-8100
    • Epson EMP-8150
    • Epson EMP-9100
    • Epson EMP-8200
    • Hitachi CP-X870 Projector.cmc
    • HP xp8010
    • InFocus ScreenPlay 7200
    • JVC DLA-SX21
    • Mitsubishi X500U
    • NEC MT-860
    • NEC MT-1060
    • NEC MT-1065
    • Runco VX-5000c
    • Sharp PG-A10S
Version 16.0.4
  • Fixed bogus SIMPL+ references in "Carrier Comfort Zone II v3" module
  • Updated "Check For Program Changes" module
  • Updated Vacation Scheduler module (used by D3 Pro)
  • Fixed bug where TPS-3000L Rackname should be TPS-3000L and firmware prefix should TPS-3000.
  • Added IR drivers for the following devices
    • Dukane / 8756 / Projector
    • JVC / SRV10U / VCR
    • Samsung / VS-3500 / DVD
    • Sony / DVP-NC665P / DVD
    • Sony / SLV-900 / VCR
    • Sony / SLV-N500 / VCR
    • Zenith / L30W36 / Plasma
Version 16.0.2
  • Fixes bug where converting projects into XPanel would lose certain join numbers
  • Add new IR and RS-232 devices
Version 16.0.0
  • 15 new IR drivers
  • Updated Reserve Joins database for VTPro-e
  • Updated Scheduler modules to support NVRAM Disk
  • D3 Pro support:
    • updated 3-Wire Motor model
    • updated Bill Of Materials database
    • updated module wizard rules to change default load assignments
    • allow "switched" load types to be places on CLX-xDIMy modules
Version 15.9.9
  • Release version including some minor fixes to v15.9.8
Version 15.9.8
  • AppBuilder and D3 Pro support for the following:
    • RACK2 control processor
    • CLW-DIM, CLW-DIMS, CLW-SW, CLW-SWS
    • C2N-DB12, C2N-DB8, C2N-DB6
    • CHV-TSTAT, CHV-THSTAT
    • CNAMPX-7x200 (AppBuilder only)
  • Improved Toggle and Toggle-Dim behavior for D3 Pro (v1.1 only)
  • Updated BOM table for generating Bill Of Materials reports in D3 Pro
  • Approx 20 new 3rd party models
Version 15.9.5
  • TPS-1700 support in AppBuilder/D3 Pro
Version 15.9.4
  • TPS-1700 support in AppBuilder/D3 Pro
  • Misc. module additions/upgrades
Version 15.9.3
  • New modules for MP2 SystemBuilder support
  • New D3 Pro support modules
Version 15.9.2
  • Internal changes/bug-fixes only
Version 15.9.1
  • Adds standard command support for DEAL, SIMPL Windows
  • A number of new monitor/projector modules to support the MP2 Wizard
  • Existing monitor/projector modules were updated to use new standard naming conventions
  • Added CLW-DIM/SW support for D3 Pro
Version 15.9.0
  • Support for MP2 Wizard
  • New modules for support of D3 Pro v1.1
  • Updated lighting database for support of CLX-1FAN4 and CLX-1DELV4
Version 15.8.7
  • New/improved modules for use with D3 Pro et al.
  • 12 new IR drivers
  • Updated Bill Of Materials DB (used by D3Pro)
  • Added location info for Canadian cities (used by D3Pro)
Version 15.8.6
  • Enables XPanel target-type and simulation mode in VTPro-e
Version 15.8.5
  • Support for D3 Pro software
  • 60+ new IR device drivers
  • Updated Engraver interface support
  • Support for new touchpanel models
Version 15.7.5
  • Updated AudioRequest module (previous version broke CNX-series compatibility)
  • Updated Tandberg 6000 Consolidated module
  • A number of minor fixes relating to Crestron Home Audio and Audio/Video Dist. modules
  • Added the following relating to VTPro-e:
    • ST/STX-1700 Support
    • Added Engraving support for CNIRHT-15/30, CNRFHT-15/30, CNX-B12, CNX-B8, CNX-B6, CNX-B4, CNX-B2, and ST/STX-1700
    • Standardized Reserved Join Names
    • Added Reserved Join Information for DVP-4 and ST/STX-1700
  • Added approx. 40 new IR-controlled devices

Version 15.7.4
  • Updated AudioRequest module
  • Modified the Animation Engine and Timer modules to be AppBuilder compatible
  • Added AppBuilder events to a number of modules
  • Updated the Audio Distribution CNRFHT-30 module (for AppBuilder) to remove an undriven signal warning
  • Buffered output signal on power/standby extender modules to prevent a "signal jamming" error via AppBuilder.
Version 15.7.3 (BETA)
  • Added support for TPS RF panels via AppBuilder
  • Updated AudioRequest module
  • Added 37 IR drivers that were missing in v15.7.2
Version 15.7.2 BETA (Build 2)
  • Added support for CNX-Bxx panels to VTPro-e (for AppBuilder) and Crestron Engraver
  • Added AppBuilder support for CNX-BF12/BN12 keypads with Audio/Video Distribution plug-ins
  • Added approx. 20 new IR-controlled devices
Version 15.7.1 BETA
  • Modified AMP definitions to be compatible with latest SIMPL Windows version
  • Updated some AV Distribution modules to correct bugs
  • Added support for TPS-2000 to VTPro-e v2.3.x.x or later
Version 15.7.0 BETA (Build 4)
  • Added CNAMPX models for use with AV Distribution et al.
  • Updated PanelDef.mdb to be compatible with the Crestron Engraver Software
  • Added misc. controlled devices
Version 15.6.8
  • Modified support for Crestron Engraver software
  • Added support for TPS-2000
Version 15.6.7
  • Included new crssplus.dat file (same file as was posted separately on web site).
  • Updated paneldef.mdb database to add support for Crestron Engraver software
Version 15.6.6
  • Updated the crssplus.dat file (which contains all Crestron SIMPL+ modules) to correct a problem with a few modules.
  • Added RS-232/422 control modules for the following devices:
  • Make / Model / Device Family
  • Lectrosonics / AM8 / Mixer
  • Lectrosonics / AM16 / Mixer
  • Lectrosonics / MM8 / Mixer
  • Lectrosonics / TH2 / Mixer
  • Lectrosonics / TH3 / Mixer
  • Lectrosonics / AV62 / Mixer
  • CentraLite / Elegance / Lighting
  • Lexicon / DC-2 / Preamplifier
  • Lexicon / MC-1 / Preamplifier
  • JBL / SPD-3 / Audio Processor
  • Lightolier / Brilliance II / Lighting
  • Cooper Ltg / AddressPro / Lighting
  • Denon / AVR-4802 / Receiver
  • Denon / AVR-5600 / Receiver
  • Epson / EMP-5600 / Video/Data Projector
  • Epson / EMP-7600 / Video/Data Projector
  • Epson / EMP-7700 / Video/Data Projector
  • Epson / EMP-8100 / Video/Data Projector
  • Epson / EMP-8150 / Video/Data Projector
  • Epson / EMP-9100 / Video/Data Projector
  • Gentner / XAP TH1 / Conferencing
  • Hitachi / CMP-307 / Monitor
  • Kenwood / VR-5900 / Receiver
  • Krell / DVD Standard / DVD
  • Krell / Home Theater Std / Preamplifier
  • Lutron / Radio Touch / Lighting
  • Proceed / AVP / Preamplifier
  • Onkyo / Integra DPS-9.1 / Receiver
  • Onkyo / Integra DTR-8.2 / Receiver
  • Onkyo / Integra DTR-9.1 / Receiver
  • Philips / DVD-170 / DVD
  • RGB Spectrum / QuadView / Video Processor
  • Rotel / RC-1070 / Preamplifier
  • Rotel / RC-1090 / Preamplifier

Version 15.6.5
  • Removed read-only flag from Crestron SIMPL+ files, which would cause SIMPL+ compilation to fail.
Version 15.6.4
  • Updated Crestron SIMPL+ modules to be compatible with the 2-Series control systems
Version 15.6.2
  • Updated Crestron SIMPL+ modules to be compatible with the 2-Series control systems
  • Added "Camera" as valid device family for the AppBuilder "AV Distribution" plug-in
Version 15.6.1
  • Added support for the "AV Distribution" AppBuilder plug-in
  • upgraded all Crestron Modules to be compatible with 2-Series Control processors
  • Added 11 new IR-controlled devices
Version 15.6.0
  • Revised to be compatible with WinDeal v2.1 or later
  • Updated PictureTel and Tandberg "consolidated" modules
  • Added 5 new IR-controlled devices
Version 15.5.5
  • Added approx. 50 new IR-controlled devices
  • Fixed queries that caused Application Builder to list devices for which no control was available.
Version 15.5.4
  • Changed the "manufacturer" for an audio signal from "(Generic)" to "Crestron" to make finding it easier.
Version 15.5.3
  • Initial release with Application Builder support
Crestron
Crestron Electronics, Inc.
Rockleigh, NJ 07647
Tel: 800.237.2041/ 201.767.3400