4 Room CAT5 Balanced Video Receiver
This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
Converts up to four Crestron Home® CAT 5 balanced video signals to RCA unbalanced video.
The CNX-PBVR4 is designed for use with CNX-PVID8X3 and CNX-PVID8X4 video distribution switchers to enable redistribution of video return signals from up to four CNXRMCLV or C2N-DAP8RC room solution boxes. The CNX-PBVR4 installs at the head end to convert the CAT5 return signals to standard RCA unbalanced, allowing each signal to be connected to any available input on the switcher so that it may be distributed to any other room as if it were another head end source.
The CNX-PBVR4 can also be used anywhere it is necessary to convert multiple Crestron® CAT5 balanced video signals to feed conventional RCA type video inputs.
The CNX-PBVR4 is designed for transparent operation and contains no switching circuitry. Video compensation adjustments are included to maximize the performance of video over CAT5. The CNX-PBVR4 includes a dedicated external power pack and requires no connection to the Cresnet control network.
| ||Signal Types ||Component (YPbPr), S-Video (Y/C), or composite video; digital audio |
| ||Video/HDTV Formats ||480i (NTSC), 576i (PAL), 480p, 576p, 720p, 1080i |
| ||Digital Audio Format ||S/PDIF coaxial |
| ||Bandwidth ||50MHz (CAT5) per pair |
| ||Crosstalk ||-60dB |
| ||VIDEO INPUT A – D ||(4) 8-pin RJ45 female, shielded; |
CAT5 balanced video input ports;
Input Impedance: 100 ohms per pair;
Connect to CNXRMCLV, C2N-DAP8RC, or any “CH” CAT5 video output ports
| ||VIDEO OUTPUT A – D ||(16) RCA female comprising (4) component/S-Video/composite video outputs and (4) digital audio outputs; |
Output Impedance: 75 ohms;
Input Level: 1 Vp-p nominal;
Connect to unbalanced inputs on CNX-PVID8X3 or CNX-PVID8X4
| ||24VDC ||(1) 2.1mm barrel DC power jack; |
24 Volt DC power input (PW-2420RU power pack included)
|Controls & LED Indicators |
| ||PWR ||(1) green LED, indicates 24 Volts DC power supplied from power pack |
| ||VIDEO INPUT COMP A – D ||(4) groups of (3) screwdriver-adjustable pots for CAT5 video input compensation |
|Power Requirements |
| ||Power Pack ||2.0 Amps @ 24 Volts DC; |
100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included
| ||Temperature ||41° to 113° F (5° to 45° C) |
| ||Humidity ||10% to 90% RH (non-condensing) |
| ||Chassis ||Metal, black matte finish |
| ||Faceplate ||Extruded aluminum, black matte finish with polycarbonate label overlay |
| ||Mounting ||Freestanding or 1U 19-inch rack-mountable (adhesive feet and rack ears included) |
| ||Height ||1.7 in (44 mm) |
| ||Width ||17.03 in (433 mm); |
19.0 in (483 mm) with rack ears
| ||Depth ||6.67 in (170 mm) |
| ||2.88 lb (1.29 kg) |