Products

    Pages

        HD-MD-300-C-E-B

        HD Scaling Auto-Switcher & Extender 300, Black

        Provides a simple and cost-effective high-definition AV presentation solution for classrooms and meeting spaces. It is composed of a wall plate transmitter, which installs in a 2-gang electrical box, and a receiver, which installs at the display. Two auto-switching inputs are provided on the transmitter, and one additional input is provided on the receiver. The transmitter and receiver connect together over a single CATx cable. Built-in scaling ensures a reliable, high-quality image. Fully-automatic operation and web browser setup eliminate the need for a control panel, control system, or programming.

        The Crestron® HD-MD-300-C-E delivers an incredibly simple and cost-effective multimedia presentation solution for classrooms and meeting spaces. It allows a laptop or mobile device (HDMI® or VGA) to be connected at a wall plate, and routes the signal to a display or projector up to 230 feet (70 meters) away. An additional HDMI source can be connected at the display device location (or through an optional wall plate near the display). Fully automatic operation detects when a source is connected or disconnected at any input and turns the display on and off, alleviating the need for any control panels or remotes. Built-in scaling ensures an optimal video image for SD and HD video signals, as well as for high-res computer signals.

        Composed of a compact transmitter and receiver pair (models HD-TX-201-C-2G-E and HD-RX-201-C-E respectively), the HD-MD-300-C-E installs in minutes and requires no special programming. The transmitter mounts in a standard 2-gang electrical box, while the receiver mounts behind the display or above the projector. The only connection required between the transmitter and receiver is a single CAT type twisted pair cable.[1] A LAN port on the receiver allows for connection to an Ethernet network to enable easy setup and configuration via a web browser. Advanced functionality is enabled through integration with a Crestron control system.

        Convenience LAN Jack
        The wall plate transmitter includes a CAT6a RJ45 convenience jack, which can be used to provide a 1000Base-T network connection for computers and other devices. The front panel jack simply passes through to a parallel jack on the rear, which connects to a dedicated port on the customer’s LAN and eliminates the need for a separate RJ45 wall jack.

        Note: This LAN jack is completely independent of the LAN port on the receiver and cannot be used to interface the HD-MD-300-C-E with a computer, control system, or any other equipment.

        Multimedia Computer/AV Auto-Switcher
        The HD-MD-300-C-E handles high-definition video and computer sources with resolutions up to Full HD 1080p60, 1080i30, or WUXGA 1920x1200. One HDMI input, one VGA input, and one analog audio input are provided on the transmitter to support the connection of computers, mobile devices, and other media sources. An additional HDMI input is provided on the receiver, which may be wired to an optional wall plate or used to connect a Crestron AirMedia® wireless presentation gateway or other multimedia source installed permanently at the display device.

        The inputs on both components can be configured to switch automatically or be controlled through a Crestron control system. Auto-detection on each input enables plug-and-play simplicity, supporting HDMI, DVI, or Dual-Mode DisplayPort signals via any HDMI input, and VGA, RGB, or component video signals via the VGA input.[2,3] The analog audio input is switched in tandem with the VGA input.[4] The auto-switching behavior can be configured using “priority routing” mode, allowing the installer to define which inputs take precedence over other inputs when connecting multiple sources.

        A single HDMI output is provided on the receiver to feed the display device. This output can support either HDMI or DVI signal types.[5] A stereo analog audio output is also included to feed an optional sound bar or amplifier.[6]

        HD Signal Extender
        A single CAT type cable (sold separately) links the HD-MD-300-C-E transmitter and receiver together. This cable can be up to 230 feet (70 meters) in length, offering an ideal signal extender solution for virtually any room with a single display device.[1]

        HD Scaler
        One might assume that any modern display device should support whatever sources you connect to it. In fact, many displays just can’t handle all the different formats and resolutions you’re likely to encounter day-to-day in a dynamic presentation environment. With its built-in professional scaler, the HD-MD-300-C-E enables support for a complete range of digital and analog signals, ensuring that every source displays reliably and beautifully. Automatic calibration is achieved using the display’s EDID [7] — just connect the receiver to the display and it intelligently converts and enhances the signal for optimal appearance on the display screen.

        EDID Format Management
        To ensure that every source gets displayed at its optimal resolution and format, the HD-MD-300-C-E provides comprehensive management of the EDID information that passes between the display, scaler, and source devices. Most applications require no changes to the default settings. For applications requiring custom configuration, the HD-MD-300-C-E allows for easy assessment of each device’s format and resolution capabilities, with the ability to configure signals appropriately for the most desirable and predictable behavior.

        QuickSwitch HD™ Technology
        Handling digital media signals means handling HDCP (High-bandwidth Digital Content Protection), the encryption scheme used by content providers to protect their DVDs, Blu-ray™ discs, and broadcast signals against unauthorized copying. Viewing HDCP encrypted content requires a source device to “authenticate” each display and signal processor in the system and issue it a “key” before delivering an output signal. Crestron QuickSwitch HD manages these keys to ensure fast, reliable switching and immunity to “blackouts.”

        Audio De-Embedding
        Its analog audio output allows the HD-MD-300-C-E to extract the stereo audio signal from digital sources to feed a sound bar, amplified speakers, or a separate sound system.[6]

        Embedded Device Control
        To deliver fully automatic operation of the complete system, the HD-MD-300-C-E can turn the display device on and off via its HDMI connection using CEC (Consumer Electronics Control) commands, or via the built-in IR or RS-232 port. For advanced applications using a Crestron control system, all of the HD-MD-300-C-E’s HDMI, IR, and RS-232 ports can be utilized to attain fully-programmable control of the display, sources, and other devices in the room.

        Control System Integration
        Fully programmable functionality can be enabled through integration with a Crestron control system. Integration with a control system also enables centralized monitoring using the Crestron Fusion® Enterprise Management Service.

        Low-Profile Installation
        The wall plate transmitter (HD-TX-201-C-2G-E) is designed to mount in a 2-gang electrical box [8], while the receiver (HD-RX-201-C-E) typically mounts on the wall behind a flat-panel display or on the ceiling above a projector. Alternately, the receiver can be attached to a single rack rail in the back of an equipment cabinet. Both components are powered together using a single wall mount power pack (included) connected at the receiver location. Power is carried between the receiver and transmitter over the signal extension link connection.

        Easy Setup
        Simplified setup, configuration, and basic operation is provided through a web browser user interface. Essential controls and status indicators are also provided on each unit for easy testing and troubleshooting without a computer during installation.

         
        Key Features
        • 2x1+1 high-definition digital AV switcher, scaler, and extender
        • Fully-automatic operation — no control system, control panel, or programming required!
        • Easy web browser setup
        • Supports integration with a Crestron® control system for fully programmable functionality
        • Includes an in-wall transmitter and surface-mountable receiver
        • Transmitter includes one HDMI® input, one VGA input, and one analog audio input [2,3,4]
        • A convenience LAN jack provides a passive CAT6a network pass-through connection
        • Receiver includes one HDMI input, one HDMI output, and one analog audio output [2,5,6]
        • A single CATx cable links the transmitter to the receiver [1]
        • Supports cable lengths up to 230 feet (70 meters) between the transmitter and receiver [1]
        • Automatically scales input signals to match the native resolution of the room display
        • Supports a range of display resolutions up to Full HD 1080p and WUXGA
        • Supports any input resolution up to Full HD 1080p and WUXGA [9]
        • Performs deinterlacing of NTSC, PAL, and 1080i sources
        • Handles Dolby Digital® 5.1, DTS® 5.1, and uncompressed 7.1 linear PCM audio
        • Allows stereo HDMI-to-analog audio de-embedding [6]
        • Provides up to 150 ms lip-sync audio delay
        • QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching
        • Includes comprehensive built-in EDID configuration tools
        • Provides a 10/100 Ethernet LAN connection
        • Enables device control via CEC, IR, or RS-232
        • Universal 100-240V external power pack included
        1. The maximum cable length for the signal extension link between the transmitter and receiver is 230 feet (70 meters) using Crestron DM-CBL-8G DigitalMedia 8G cable or third-party CAT5e (or better). Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise. All wire and cables are sold separately. The signal extension link is a proprietary interface and is not compatible with HDBaseT®, DigitalMedia™ (DM®), Ethernet, or any other CATx based interface.
        2. Each HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
        3. The VGA input can accept RGB and component video signals through an appropriate adapter (not included).
        4. The analog audio input is only active when the VGA input is selected. It can be used with an audio-only source with no video source connected. The analog audio input cannot be paired with the HDMI video input.
        5. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
        6. The analog stereo audio output is only active when the input is receiving a 2-channel stereo signal via either the analog input or HDMI.
        7. EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal that enables the display device to tell the scaler what resolutions and formats it can support, allowing the scaler to configure itself automatically to feed an optimal output signal to the display.
        8. Requires a decorator style faceplace (not included). This product is not compatible with Crestron FP-G series faceplates.
        9. Supports any input resolution and scan rate that has a pixel clock of 165 MHz or lower.
        10. With reduced blanking only.
        11. With or without reduced blanking.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, AirMedia, Crestron Fusion, DigitalMedia, DigitalMedia 8G, DM, QuickSwitch HD, and Saros are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  Blu-ray is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries.  Dolby Digital is either a trademark or registered trademark of Dolby Laboratories in the United States and/or other countries.  DTS is either a trademark or registered trademark of DTS, Inc. in the United States and/or other countries.  HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries.  HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        Video
          Switcher 2x1+1 (2 inputs at transmitter + 1 input at receiver) auto-switching, auto-detecting multi-format digital/analog inputs; Crestron QuickSwitch HD technology
          Scaler HD video scaler and deinterlacer, noise reduction, 3:2/2:2 pull-down detection and recovery, aspect ratio selection, VGA phase/clock & H/V position adjustments, picture and RGB color adjustments
          Input Signal Types HDMI w/Deep Color (DVI & Dual-Mode DisplayPort compatible [2]), VGA/RGB (RGBHV, RGBS, RGsB), component (YPbPr) [3]
          Output Signal Types HDMI w/Deep Color (DVI compatible [5])
          Input Resolutions, HDMI, Progressive 640x480@60/72/75/85Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@56/60/72/75/85Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60/70/75/85Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50/60Hz (720p50/60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60/75/85Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz [10], 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24/25/50/60Hz (1080p24/25/50/60), 1920x1200@60Hz [10], plus any other resolution up to 165MHz pixel clock
          Input Resolutions, HDMI, Interlaced 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25/30Hz (1080i25/30), plus any other resolution up to 165MHz pixel clock
          Input Resolutions, RGB/VGA, Progressive 640x480@60/72/75/85Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@56/60/72/75/85Hz, 848x480@60Hz, 1024x768@60/70/75/85Hz, 1280x720@50/60Hz (720p50/60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60/75/85Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@50/60Hz, 1920x1080@50/60Hz (1080p50/60), 1920x1200@60Hz [10], plus any other resolution up to 165MHz pixel clock
          Input Resolutions, Component, Progressive 480p, 576p, 720p50, 720p60, 1080p24, 1080p30, 1080p50 (1125 lines), 1080p60
          Input Resolutions, Component, Interlaced 480i, 576i, 1080i25 (1125 lines), 1080i30
          Scaler Output Resolutions, HDMI, Progressive 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 840x480@60Hz, 1024x768@60Hz, 1280x720@50/60Hz (720p50/60), 1280x768@60Hz [11], 1280x800@60Hz [11], 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz [11], 1400x1050@60Hz [11], 1440x900@60Hz [11], 1600x900@60Hz [10], 1600x1200@60Hz, 1680x1050@60Hz [11], 1920x1080@30/50/60Hz (1080p30/50/60), 1920x1200@60Hz [10]
          Scaler Output Resolutions, HDMI, Interlaced 480i, 576i, 1080i25, 1080i30
        Audio
          Switcher 2x1+1 (2 inputs at transmitter + 1 input at receiver)
          Input Signal Types HDMI (Dual-Mode DisplayPort compatible), analog stereo
          Output Signal Types HDMI, analog stereo [6]
          Digital Formats Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, LPCM up to 8 channels
          Analog Formats Stereo 2-channel [6]
          Analog-To-Digital Conversion 24-bit 48 kHz
          Digital-To-Analog Conversion 24-bit 48 kHz
          Lip-Sync Delay 0 to 150 ms (maximum delay time is reduced for input signals with sampling rates over 48 kHz)
          Analog Output Volume -80 to +20 dB Level adjustment range, plus Mute
          Analog Input Performance Frequency Response: 20 Hz to 20 kHz ±0.75 dB;
        S/N Ratio: >90 dB, 20 Hz to 20 kHz A-weighted;
        THD+N: <0.006% @ 1 kHz;
        Stereo Separation: >80 dB
          Analog Output Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
        S/N Ratio: >95 dB, 20 Hz to 20 kHz A-weighted;
        THD+N: <0.005% @ 1 kHz;
        Stereo Separation: >80 dB
        Communications
          Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, web browser setup and control, Crestron control system integration
          RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
          IR 1-way device control via infrared up to 60 kHz
          HDMI HDCP 1.4, EDID, CEC
          NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system
        Connectors – Receiver (HD-RX-201-C-E)
          HDMI, INPUT 1 (1) HDMI Type A connector, female;
        HDMI digital video/audio input;
        (DVI & Dual-Mode DisplayPort compatible [2])
          FROM TX, INPUT 2 (1) 8-pin RJ45 connector, female, shielded;
        Signal extension link input port;
        Connects to the TO RX port of the companion receiver via CAT5e or Crestron DM-CBL-8G cable [1]
          HDMI OUTPUT (1) HDMI Type A connector, female;
        HDMI digital video/audio output (DVI compatible [5])
          AUDIO L/R (1) 5-pin 3.5 mm detachable terminal block;
        Balanced/unbalanced stereo line-level audio output [6];
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
        Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced
          IR (1) 2-pin 3.5 mm detachable terminal block;
        IR port;
        IR output up to 60 kHz
          COM (1) 5-pin 3.5 mm detachable terminal block;
        Bidirectional RS-232 port;
        Up to 115.2k baud, hardware and software handshaking support
          LAN (1) 8-pin RJ45 connector, female;
        10Base-T/100Base-TX Ethernet port
          24VDC 1.25A (1) 2.1 x 5.5 mm DC power connector;
        24 Volt DC power input;
        PW-2412WU power pack included
          SERVICE (1) USB Type A connector, female;
        For factory use only
        Connectors – Transmitter (HD-TX-201-C-2G-E)
          HDMI IN (1) HDMI Type A connector, female;
        HDMI digital video/audio input;
        (DVI & Dual-Mode DisplayPort compatible [2])
          VGA IN (1) HD15 connector, female;
        RGB (VGA) or component video input [3];
        Formats: RGBHV, RGBS, RGsB, YPbPr
          AUDIO IN (1) 3.5 mm TRS mini phone jack;
        Unbalanced stereo line-level audio input [4];
        Maximum Input Level: 2 Vrms;
        Input Impedance: 44k Ohms
          LAN (Front) (1) 8-pin RJ45 connector, female;
        Passive pass-through to the rear panel LAN jack;
        See “LAN (Rear)” specifications below
          SERVICE (Right Side) (1) USB Type A connector, female;
        For factory use only
          TO RX (Rear) (1) 8-pin RJ45 connector, female, shielded;
        Signal extension link output port;
        Connects to the FROM TX, INPUT 2 port of the companion receiver via CAT5e or Crestron DM-CBL-8G cable [1]
          24VDC 1.25A (Rear) (2) Captive screw terminals;
        Not used
          LAN (Rear) (1) 8-pin RJ45 connector, female;
        Passive pass-through to the front panel LAN jack;
        Compatible Cable Standards: CAT5e, CAT6, CAT6a;
        Low Level Contact Resistance: 100 mΩ maximum;
        Insulation Resistance: 500 mΩ minimum at 500 Volts DC;
        Dielectric Withstanding Voltage: 1000 Volts AC between contacts and shell;
        Voltage Rating: 125 Volts AC;
        Current Rating: 1.5 Amps;
        PoE Compatibility: IEEE 802.3at PoE & PoE+;
        Insertion Force: 22 N maximum;
        Retention Force: 76 N minimum
        Controls & Indicators – Receiver (HD-RX-201-C-E)
          FROM TX, INPUT 2 (2) LEDs, green LED indicates signal extension link status, amber LED indicates video and HDCP signal presence
          LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
          PWR (1) Bi-color green/amber LED, indicates operating power is supplied from the power pack via the 24VDC input, turns amber while booting and green when operating
          AUTO (1) Pushbutton to enable/disable auto-switching mode, and (1) green LED to indicate auto-switching mode it enabled
          INPUT 1 – 2 (2) Pushbuttons for manual input selection, and (2) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding input
          SETUP (1) Red LED and (1) recessed pushbutton for Ethernet setup
        Controls & Indicators – Transmitter (HD-TX-201-C-2G-E)
          PWR (1) Bi-color green/amber LED, indicates operating power is supplied via the link to the companion receiver, turns amber while booting and green when operating
          HDMI IN (1) Bi-color green/amber LED to indicate if the HDMI input is selected and if a signal is present
          VGA IN (1) Bi-color green/amber LED to indicate if the VGA input is selected and if a signal is present
          INPUT SEL (1) Pushbutton for manual input selection, cycles through the HDMI and VGA inputs on both the transmitter and receiver
          AUTO (1) Pushbutton to enable/disable auto-switching mode, and (1) green LED to indicate auto-switching mode it enabled
          SETUP (1) Red LED and (1) recessed pushbutton for Ethernet setup
          LINK (1) Green LED, indicates a link to the companion receiver
          RESET (1) Pushbutton for hardware reset of both the transmitter and receiver
        Power
          Power Pack (included) Input: 0.8 Amps (maximum) @ 100-240 Volts AC, 50/60 Hz;
        Output: 1.25 Amps @ 24 Volts DC;
        Model: PW-2412WU
          Power Consumption 13 Watts typical
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 20% to 90% RH (non-condensing)
          Heat Dissipation 44.3 BTU/hr
        Construction – Receiver (HD-RX-201-C-E)
          Chassis Metal, black finish, with (2) integral mounting flanges, vented sides
          Mounting Freestanding, surface mount, or attach to a single rack rail
        Construction – Transmitter (HD-TX-201-C-2G-E)
          Chassis Metal, black or white painted front, bare metal back, (2) metal decorator-style inserts with black or white polycarbonate label overlay
          Mounting Mounts in a 2-gang (or larger), 2" (50 mm) deep (minimum) electrical box or plaster ring; requires a decorator style faceplate (not included) [8]
        Dimensions
          Receiver
        (HD-RX-201-C-E)
        Height: 4.94 in (126 mm);
        Width: 7.70 in (196 mm);
        Depth: 1.11 in (28 mm)
          Transmitter
        (HD-TX-201-C-2G-E)
        Height: 4.19 in (107 mm);
        Width: 3.50 in (89 mm);
        Depth: 1.92 in (49 mm)
        Weight
          Receiver
        (HD-RX-201-C-E)
        1.30 lb (590 g)
          Transmitter
        (HD-TX-201-C-2G-E)
        0.56 lb (252 g)
        1. The maximum cable length for the signal extension link between the transmitter and receiver is 230 feet (70 meters) using Crestron DM-CBL-8G DigitalMedia 8G cable or third-party CAT5e (or better). Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise. All wire and cables are sold separately. The signal extension link is a proprietary interface and is not compatible with HDBaseT®, DigitalMedia™ (DM®), Ethernet, or any other CATx based interface.
        2. Each HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
        3. The VGA input can accept RGB and component video signals through an appropriate adapter (not included).
        4. The analog audio input is only active when the VGA input is selected. It can be used with an audio-only source with no video source connected. The analog audio input cannot be paired with the HDMI video input.
        5. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
        6. The analog stereo audio output is only active when the input is receiving a 2-channel stereo signal via either the analog input or HDMI.
        7. EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal that enables the display device to tell the scaler what resolutions and formats it can support, allowing the scaler to configure itself automatically to feed an optimal output signal to the display.
        8. Requires a decorator style faceplace (not included). This product is not compatible with Crestron FP-G series faceplates.
        9. Supports any input resolution and scan rate that has a pixel clock of 165 MHz or lower.
        10. With reduced blanking only.
        11. With or without reduced blanking.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, AirMedia, Crestron Fusion, DigitalMedia, DigitalMedia 8G, DM, QuickSwitch HD, and Saros are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  Blu-ray is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries.  Dolby Digital is either a trademark or registered trademark of Dolby Laboratories in the United States and/or other countries.  DTS is either a trademark or registered trademark of DTS, Inc. in the United States and/or other countries.  HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries.  HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.