Products

    Pages

        HD-EXT-USB-2000-C

        4K HDMI® & USB over HDBaseT® Extender 2000

        A point-to-point signal extender for HDMI®, USB 2.0, RS-232, IR, and Ethernet signals.

        The HD-EXT-USB-2000-C is a point-to-point signal extender for HDMI®, USB 2.0, RS-232, IR, and Ethernet signals. Analog audio input and/or output signals are also supported in combination with HDMI video. The HD-EXT-USB-2000-C is ideal for use with a single HD or UHD display device and USB camera to extend the signal wiring from an AV media source, computer, central equipment cabinet, or Crestron Mercury™ Tabletop Conference System.

        The extender is composed of a compact transmitter and receiver pair, which may be installed up to 330 feet (100 meters) apart (depending on the video resolution and wire type). Video, audio, control, and LAN signals are all transported through a single CAT type cable (not included) using HDBaseT® technology.[1]

        Note: This product is not addressable from a control system and offers no programmable functionality. Ethernet, USB, CEC, IR, and RS-232 signals are simply passed through. The transmitter and receiver are intended to be used together and are not intended to be interfaced with other HDBaseT equipment.

         
        Key Features
        • HDBaseT® Certified 4K Ultra HD signal extender
        • Extends uncompressed digital video, audio, control, and LAN signals over a single CAT type twisted pair cable [1]
        • Supports cable lengths up to 330 ft (100 m) depending on the video resolution and wire type [1]
        • Handles video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
        • Handles 3D video and Deep Color
        • Supports Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
        • Compatible with HDMI®, DVI, and DisplayPort Multimode sources [2]
        • Compatible with HDMI and DVI display devices [2]
        • Includes balanced and unbalanced stereo analog audio input and output [3,4]
        • Supports stereo analog audio embedding and de-embedding
        • HDCP 2.2 compliant
        • Passes CEC and EDID signals
        • Extends 10/100 Ethernet, RS-232, and IR control signals
        • Extends USB 2.0 signals in either direction (mode selectable) [5]
        • Low-profile surface mount design
        • Universal 100-240V power pack included
        • Ideal for use with Crestron Mercury™ systems
        1. The maximum cable length for HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum HDBaseT Cable Lengths” table for a detailed overview. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. All wire and cables are sold separately.
        2. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
        3. The analog stereo audio input must be selected manually. When the analog audio input is selected, the HDMI audio input signal is disabled.
        4. The analog stereo audio output is only active when the input is receiving a 2-channel stereo signal via either the analog or HDMI input.
        5. The USB mode can be selected manually or automatically to enable the USB host (computer, etc.) to be connected at either the transmitter or receiver end, not both. This product is engineered to deliver maximum compatibility with the widest possible range of USB equipment. Crestron does not guarantee that all USB devices or hosts are compatible with this product.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Crestron Mercury, DigitalMedia, and DigitalMedia 8G are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.  DTS and DTS-HD are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries.  HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries.  HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        4K HDCP 2.2
        Video
          Input Signal Types (@TX) HDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [2])
          Output Signal Types (@RX) HDMI w/Deep Color, 3D, & 4K (DVI compatible [2])
           
        Maximum Resolutions
         
        Scan
        Type
        Resolution Frame
        Rate
        Color
        Sampling
        Color
        Depth
        Progressive 4096x2160 DCI 4K
        &
        3840x2160 4K UHD
        24 Hz 4:4:4 30 bit
        30 Hz 4:4:4 24 bit
        30 Hz 4:2:2 36 bit
        60 Hz 4:2:0 24 bit
        2560x1600 WQXGA 60 Hz 4:4:4 36 bit
        1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
        Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
          NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
        Audio
          Input Signal Types (@TX) HDMI (Dual-Mode DisplayPort compatible), analog stereo [3]
          Output Signal Types (@RX) HDMI, analog stereo [4]
          Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, LPCM up to 8 channels
          Analog Formats Stereo 2-channel
          Analog-To-Digital Conversion 24-bit 48 kHz
          Digital-To-Analog Conversion 24-bit 48 kHz
          Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
        S/N Ratio: >95 dB, 20 Hz to 20 kHz A-weighted;
        THD+N: <0.005% @ 1 kHz;
        Stereo Separation: >80 dB, 20 Hz to 20 kHz
        Communications
          Ethernet 10/100 Mbps pass-through
          USB USB 2.0 pass-through (also supports firmware update via USB mass storage device at TX)
          RS-232 2-way serial pass-through up to 115.2k baud (TD/RD only)
          IR Bidirectional IR signal pass-through up to 60 kHz
          HDMI HDCP 2.2, EDID, CEC pass-through
          HDBaseT HDCP 2.2, EDID, PoE+, Ethernet, IR/RS-232 (intended for signal extension between TX & RX only)
        Connectors – Transmitter (HD-TX-USB-2000-C)
          HDMI IN (1) HDMI Type A connector, female;
        HDMI digital video/audio input;
        (DVI & Dual-Mode DisplayPort compatible [2])
          AUDIO IN (1) 3.5 mm TRS mini phone jack & (1) 5-pin 3.5 mm detachable terminal block;
        Balanced or unbalanced stereo line-level audio input [3];
        Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
        Input Impedance: 10k Ohms balanced, 5k Ohms unbalanced;
        Note: The TRS jack is unbalanced stereo and paralleled with the L+ (tip), R+ (ring), and ground (sleeve) terminals; only one audio input connection should be used; this input signal supplants the HDMI audio input signal when selected
          USB (host) (1) USB Type A connector, female;
        USB 2.0 host port for connection of a mouse, keyboard, or any other USB 2.0 peripheral device [5];
        Passes USB data to/from the USB device port on the RX when in DEVICE mode;
        Available Power: 1 Amp at 5 Volts DC
          USB (device) (1) USB Type Micro-B connector, female;
        USB 2.0 device port for connection to a computer or any other USB 2.0 host [5];
        Passes USB data to/from the USB host port on the RX when in HOST mode
          LAN (1) 8-pin RJ45 connector, female;
        10Base-T/100Base-TX Ethernet port;
        Passes Ethernet data to/from the LAN port on the RX
          COM (1) 3.5 mm TRS mini phone jack & (1) 3-pin 3.5 mm detachable terminal block;
        Bidirectional RS-232 port;
        Passes RS-232 TD/RD data to/from the COM port on the RX;
        Supports up to 115.2k baud
        Note: The TRS jack and terminal block are paralleled; only one should be used
          IR IN (1) 3.5 mm TS mini phone jack & (1) 2-pin 3.5 mm detachable terminal block;
        IR input port for connection from a Crestron IR control port or other IR signal source;
        Passes IR signal to the IR OUT port on the RX;
        Supports IR up to 60 kHz;
        Note: The TS jack and terminal block are paralleled; only one should be used
          HDBT OUT (1) 8-pin RJ45 connector, female, shielded;
        HDBaseT and PoE Class 3 PD port for connection to the HDBT IN port on the RX [1]
          IR OUT (1) 3.5 mm TS mini phone jack & (1) 2-pin 3.5 mm detachable terminal block;
        IR output port for connection to an IR emitter;
        Passes IR signal from the IR IN port on the RX;
        Supports IR up to 60 kHz;
        Note: The TS jack and terminal block are paralleled; only one should be used
        Connectors – Receiver (HD-RX-USB-2000-C)
          HDMI OUT (1) HDMI Type A connector, female;
        HDMI digital video/audio output (DVI compatible [2])
          AUDIO OUT (1) 3.5 mm TRS mini phone jack & (1) 5-pin 3.5 mm detachable terminal block;
        Balanced or unbalanced stereo line-level audio output [4];
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
        Output Impedance: 499 Ohms balanced or unbalanced;
        Note: The TRS jack is unbalanced stereo and paralleled with the L+ (tip), R+ (ring), and ground (sleeve) terminals
          USB (host) (1) USB Type A connector, female;
        USB 2.0 host port for connection of a mouse, keyboard, or any other USB 2.0 peripheral device [5];
        Passes USB data to/from the USB device port on the TX when in HOST mode;
        Available Power: 1 Amp at 5 Volts DC
          USB (device) (1) USB Type Micro-B connector, female;
        USB 2.0 device port for connection to a computer or any other USB 2.0 host [5];
        Passes USB data to/from the USB host port on the TX when in DEVICE mode
          LAN (1) 8-pin RJ45 connector, female;
        10Base-T/100Base-TX Ethernet port;
        Passes Ethernet data to/from the LAN port on the TX
          COM (1) 3.5 mm TRS mini phone jack & (1) 3-pin 3.5 mm detachable terminal block;
        Bidirectional RS-232 port;
        Passes RS-232 TD/RD data to/from the COM port on the TX;
        Supports up to 115.2k baud;
        Note: The TRS jack and terminal block are paralleled; only one should be used
          IR IN (1) 3.5 mm TS mini phone jack & (1) 2-pin 3.5 mm detachable terminal block;
        IR input port for connection from a Crestron IR control port or other IR signal source;
        Passes IR signal to the IR OUT port on the TX;
        Supports IR up to 60 kHz;
        Note: The TS jack and terminal block are paralleled; only one should be used
          HDBT IN (1) 8-pin RJ45 connector, female, shielded;
        HDBaseT and PoE+ PSE port for connection to the HDBT OUT port on the TX [1]
          IR OUT (1) 3.5 mm TS mini phone jack & (1) 2-pin 3.5 mm detachable terminal block;
        IR output port for connection to an IR emitter;
        Passes IR signal from the IR IN port on the TX;
        Supports IR up to 60 kHz;
        Note: The TS jack and terminal block are paralleled; only one should be used
          24VDC 1.25A (1) 2.1 x 5.5 mm DC power connector;
        24 Volt DC power input;
        PW-2412WU power pack included;
        Note: This connection powers both the receiver and transmitter
        Controls & Indicators – Transmitter (HD-TX-USB-2000-C)
          POWER (1) Bi-color green/amber LED, indicates operating power is supplied via the HDBaseT link to the companion receiver, turns amber while booting and green when operating
          HDMI IN (1) Green LED, indicates HDMI input signal presence
          LINK (1) Bi-color green/amber LED, green indicates an HDBaseT link with video, amber indicates a link without video
          AUDIO SEL HDMI/ANALOG (1) 2-position slide switch, selects the audio input [3]
          RESET (1) Recessed pushbutton, initiates hardware reset of both the transmitter and receiver
          LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
          HDBT OUT (2) LEDs, amber LED indicates HDBaseT link status, green LED indicates PoE
        Controls & Indicators – Receiver (HD-RX-USB-2000-C)
          POWER (1) Bi-color green/amber LED, indicates operating power is supplied from the power pack via the 24VDC input, turns amber while booting and green when operating
          HDMI OUT (1) Green LED, indicates HDMI output signal presence
          LINK (1) Bi-color green/amber LED, green indicates an HDBaseT link with video, amber indicates a link without video
          HOST/AUTO/DEVICE (1) 3-position slide switch, selects the USB mode [5]
          LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
          HDBT IN (2) LEDs, amber LED indicates HDBaseT link status, green LED indicates PoE
        Power
          Power Pack (included) Input: 0.8 Amps (maximum) @ 100-240 Volts AC, 50/60 Hz;
        Output: 1.25 Amps @ 24 Volts DC;
        Model: PW-2412WU
          Power Consumption 18.7 Watts typical
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 20% to 90% RH (non-condensing)
          Heat Dissipation 63.8 BTU/hr
        Construction – Typical of Transmitter & Receiver
          Chassis Metal, black finish, with (2) integral mounting flanges, vented sides
          Mounting Freestanding, surface mount, or attach to a single rack rail
        Dimensions
          Transmitter
        (HD-TX-USB-2000-C)
        Height: 4.47 in (114 mm);
        Width: 9.61 in (244 mm);
        Depth: 0.99 in (25 mm)
          Receiver
        (HD-RX-USB-2000-C)
        Height: 4.47 in (114 mm);
        Width: 9.61 in (244 mm);
        Depth: 0.99 in (25 mm)
        Weight
          Transmitter
        (HD-TX-USB-2000-C)
        1.71 lb (776 g)
          Receiver
        (HD-RX-USB-2000-C)
        1.71 lb (776 g)
        Maximum HDBaseT Cable Lengths
         
         
         
        Resolution
        Cable Type
        DM-CBL-ULTRA
        DigitalMedia™ Ultra Cable
        DM-CBL-8G
        DigitalMedia 8G™ Cable
        CAT5e
        (or better) [1]
        1080p60 Full HD 330 ft (100 m) 330 ft (100 m) 330 ft (100 m)
        1920x1200 WUXGA
        1600x1200 UXGA
        2048x1080 DCI 2K
        2560x1440 WQHD 230 ft (70 m) 165 ft (50 m)
        2560x1600 WQXGA
        3840x2160 4K UHD
        4096x2160 DCI 4K
        1. The maximum cable length for HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum HDBaseT Cable Lengths” table for a detailed overview. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. All wire and cables are sold separately.
        2. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
        3. The analog stereo audio input must be selected manually. When the analog audio input is selected, the HDMI audio input signal is disabled.
        4. The analog stereo audio output is only active when the input is receiving a 2-channel stereo signal via either the analog or HDMI input.
        5. The USB mode can be selected manually or automatically to enable the USB host (computer, etc.) to be connected at either the transmitter or receiver end, not both. This product is engineered to deliver maximum compatibility with the widest possible range of USB equipment. Crestron does not guarantee that all USB devices or hosts are compatible with this product.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Crestron Mercury, DigitalMedia, and DigitalMedia 8G are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.  DTS and DTS-HD are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries.  HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries.  HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.