Products

    Pages

        HD-DA4-4K-E

        1-to-4 4K HDMI® Distribution Amplifier

        Splits one 4K HDMI® source to four separate outputs.

        The Crestron® HD-DA4-4K-E is a simple to use, high-performance distribution amplifier designed to split a single HDMI® signal to feed up to four separate displays, switchers, AV receivers, and other devices. It handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP, 3D, Deep Color, and high-bitrate 7.1 audio. No programming or control system is required for operation.

        For smaller or larger applications, please see the two-output HD-DA2-4K-E and the eight-output HD-DA8-4K-E.

         
        Key Features
        • Splits one HDMI® source to four outputs
        • Handles video resolutions up to 4K and Ultra HD
        • Handles 3D video and Deep Color
        • Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
        • HDCP compliant
        • Includes input and output sync indicators
        • No programming or control system required
        • Thin profile – less than one inch deep
        • Surface, shelf, or single rack rail mountable
        1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
        2. Using the COPY 1ST mode, if the device connected to OUTPUT 1 is disconnected, the current EDID will be retained. Changing the device connected to OUTPUT 1 will not update the EDID at the INPUT until the EDID switch is moved to the DEFAULT position and then back to the COPY 1ST position.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.

         
        4K
        Video
          Input Signal Types HDMI® w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [1])
          Output Signal Types HDMI w/Deep Color, 3D, & 4K (DVI compatible [1])
         
        Maximum Resolutions
         
        Scan Type Resolution Frame
        Rate
        Color
        Sampling
        Color
        Depth
        Progressive 4096x2160 4K DCI
        or
        3840x2160 Ultra HD
        24 Hz 4:4:4 30 bit
        30 Hz 4:4:4 24 bit
        30 Hz 4:2:2 36 bit
        60 Hz 4:2:0 24 bit
        2560x1600 WQXGA 60 Hz 4:4:4 36 bit
        1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
        Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
          NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
        Audio
          Input Signal Types HDMI (Dual-Mode DisplayPort compatible [1])
          Output Signal Type HDMI
          Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
        Communications
          HDMI HDCP & EDID (does not pass CEC)
          EDID Mode selectable for COPY 1ST or DEFAULT:
        • COPY IST copies the EDID from the device connected to OUTPUT 1 and sends it to the source connected to the INPUT [2]
        • DEFAULT = 720x480@60Hz, 1280x720@60Hz, 1920x1080@30Hz, 1920x1080@60Hz (preferred), and 2-channel linear PCM audio)
        Connectors
          INPUT (1) 19-pin Type A HDMI female;
        HDMI digital video/audio input;
        Also supports DVI and Dual-Mode DisplayPort [1]
          OUTPUT 1 – 4 (4) 19-pin Type A HDMI female;
        HDMI digital video/audio outputs;
        Also supports DVI [1]
          SERVICE (1) USB Type Mini-B jack;
        For factory use only
          24VDC 0.75A (1) 2.1 x 5.5 mm DC power connector;
        24 Volt DC power input;
        PW-2407WU power pack included
        Controls & Indicators
          PWR (1) Green LED, indicates operating power supplied via power pack
          INPUT (1) Green LED, indicates a video signal at the HDMI input
          OUTPUT 1 – 4 (4) Green LEDs, indicate video signals at each corresponding HDMI output
          EDID (1) 2-position slide switch, selects EDID mode
        Power Requirements
          Power Pack 0.75 Amps @ 24 Volts DC;
        100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
          Power Consumption 5 Watts typical
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 17.1 BTU/hr
        Enclosure
          Chassis Metal, black finish, with (2) integral mounting flanges
          Mounting Freestanding, surface mount, or attach to a single rack rail
        Dimensions
          Height 4.06 in (104 mm)
          Width 8.06 in (205 mm)
          Depth 0.87 in (23 mm)
        Weight
          1.11 lb (0.50 kg)
        1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
        2. Using the COPY 1ST mode, if the device connected to OUTPUT 1 is disconnected, the current EDID will be retained. Changing the device connected to OUTPUT 1 will not update the EDID at the INPUT until the EDID switch is moved to the DEFAULT position and then back to the COPY 1ST position.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.