Products

    Pages

        DM-PSU-3X8-RPS

        PoDM+ Redundant Power Supply for DM 8G+® I/O Blades & DMPS3-4K-200/300-C

        Enables PoDM and PoDM+ sourcing capability for up to three DMB-4K-I-C or DMB-4K-O-C DM 8G+® I/O blades, or up to three DMPS3-4K-200-C or DMPS3-4K-300-C DigitalMedia™ Presentation Systems.

        The DM-PSU-3X8-RPS is an optional accessory for Crestron® 8-Channel DM 8G+® Input and Output Blades (models DMB-4K-I-C & DMB-4K-O-C) and certain 3-Series® 4K DigitalMedia™ Presentation Systems (models DMPS3-4K-200-C & DMPS3-4K-300-C). It is a rack-mountable power supply that enables PoDM (Power over DigitalMedia) and PoDM+ sourcing capability for up to three blades or DMPS3 units.

        Used with DM 8G+ blades, the DM-PSU-3X8-PWS enables full PoDM and PoDM+ sourcing through all eight DM 8G+ ports on all three blades simultaneously. Used with DMPS3, it enables PoDM and PoDM+ sourcing through every DM 8G+ Input and Output port, and enables PoE sourcing through the Control Subnet port. The DM-PSU-3X8-PWS maximizes efficiency by intelligently and continuously negotiating the power required by each port.

        To ensure continuous reliable operation for mission critical applications, the DM-PSU-3X8-RPS features a modular hot-swappable redundant power supply design. A total of three power supply modules are employed, and in the unlikely event of an individual module error, the complete unit will continue to operate at full capacity with the remaining two modules working. The failed module can be easily replaced in seconds from the rear panel without shutting down the entire unit or removing it from the equipment rack. Front and rear panel LEDs provide clear indication of any errors. Status can also be monitored remotely through a control system connected to the DM® switcher in which the dependent I/O blades reside. Instant notification of an error can be sent from the control system to a system touch screen, mobile device, email client, or Crestron Fusion® Cloud.

        The DM-PSU-3X8-RPS ships complete with three hot-swappable power supply modules installed, plus three 8 ft (2.4 m) interconnect cables and three AC line power cables. Optional 20 ft (6.1 m) interconnect cables are available separately.

         
        Key Features
        • Enables PoDM and PoDM+ sourcing for DM 8G+® I/O blades and some DMPS3 systems
        • Supports up to three DMB-4K-I-C and/or DMB-4K-O-C blades
        • Supports up to three DMPS3-4K-200-C and/or DMPS3-4K-200-C systems
        • Enables full PoDM and PoDM+ at all ports on each blade or DMPS3 unit
        • Redundant power supply design ensures continuous reliable operation
        • Hot-swappable power supply modules can be replaced in seconds without shutting down
        • Includes front panel status indicators for easy troubleshooting
        • Allows status monitoring and error notification via the DM® switcher and control system
        • Single-space 19” rack-mountable
        • Includes three 8 ft (2.4 m) interconnect cables and three AC line power cables
        • Optional 20 ft (6.1 m) interconnect cables are available separately

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, 3-Series, Crestron Fusion, DigitalMedia, DM, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        Connectors
          SLOT 1 – 3 (3) Power supply module slots;
        Each slots accepts (1) DM-PSUA-PWS power supply module (3 included)
          Main Power In (3) IEC 60320 C14 main power inlets (1 per module);
        Mate with detachable 6 ft (1.8 m) power cords, included
          DC Power Out 1 – 3 (3) Combo D-sub 7w2, female;
        Each connects to one DMB-4K-I-C or DMB-4K-O-C blade, or one DMPS3 unit, via a CBL-PWR-MON-7W2 interconnect cable (8 ft / 2.4 m cables included, 20 ft / 6.1 m cables sold separately)
          COMPUTER (front) (1) USB Type B female;
        USB computer console port (for firmware update and diagnostics)
        Indicators
          OUTPUT 1 – 3 (3) Bi-color green/red LEDs, each indicates the corresponding power supply module is functioning normally with at least one blade or DMPS3 connected (green) or is experiencing an output error (red); error conditions include over-current, under-voltage, no voltage, no blade connected, or blade not communicating
          POWER SUPPLY 1 – 3 (3) Bi-color green/red LEDs, each indicates the corresponding power supply module is installed and functioning normally (green) or is installed but experiencing an error (red); error conditions include no AC input power or a power sharing imbalance between modules
          Error (rear) (3) Red LEDs (1 per module), each indicates an error with the corresponding power supply module
          DC Good (rear) (3) Green LEDs (1 per module), each indicates the corresponding power supply module is powered and functioning normally
        Power Requirements
          Main Power (3x) 6 Amps @ 100-127 Volts AC or 3 Amps @ 200-240 Volts AC, 50/60 Hz
        Redundant Power Supplies
          Quantity/Type (3) 500 Watts @ 56 Volts DC regulated, hot-swappable, variable speed fan cooled, Crestron model DM-PSUA-PWS (included)
          Efficiency 83% typical @ maximum load
          Redundancy Complete unit continues to operate at full capacity on two functioning power supply modules
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Chassis Metal, black finish, fan-cooled, vented sides and rear
          Front Panel Metal, black finish with polycarbonate label overlay
          Mounting Freestanding or 1 RU 19-inch rack-mountable (adhesive feet and rack ears included)
        Dimensions
          Height 1.74 in (45 mm)
          Width 17.28 in (439 mm);
        19.00 in (483 mm) with ears
          Depth 16.43 in (418 mm)
        Weight
          22.0 lb (10.0 kg)

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, 3-Series, Crestron Fusion, DigitalMedia, DM, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

        Online Help

        DigitalMedia™ Insider.
        Resources and tools you need for navigating Digital Video technologies. As Digital Video becomes more prominent in the A/V market place there becomes a growing need to keep up with the latest trends and changes the industry is seeing. Crestron has recognized these needs and has now created the Crestron "DM Insider". The DM Insider will allow Crestron to organize a single easy to use resource for all information as it pertains to DigitalMedia. Additional, once you subscribe to the DM Insider, [click the "notify me" icon] you will automatically receive an email when any of the resources listed below are updated, so, if a change is made, if a new document gets posted you will know right away.
        Online Help Answer ID :5100