Products

    Pages

        DMC-4KZ-HDO

        2-Channel HDMI® 4K60 4:4:4 HDR Scaling Output Card for DM® Switchers

        A modular output card for card-based Crestron® DigitalMedia™ switchers. Provides two independent 4K HDMI® outputs with complementary analog audio outputs. Supports 4K60 4:4:4 and HDR video signals and provides built-in scaling.

        The DMC-4KZ-HDO is an output card designed for use with card-based Crestron® DigitalMedia™ switchers (for example, the DM-MD8X8-CPU3). The card provides two independent HDMI® outputs with complementary analog stereo audio outputs. The HDMI outputs handle Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2, HDR10, Deep Color, and high-bitrate 7.1 audio. Built-in 4K604:4:4 scaling enables devices connected to the HDMI outputs to handle any video resolution from NTSC 480i to DCI 4K. DVI signals are also supported using an appropriate adapter or interface cable.[1]

        4K60 4:4:4 and HDR Support
        The DMC-4KZ-HDO incorporates DM 4KZ technology, which uses VESA® Display Stream Compression (DSC) to handle the extreme bandwidth requirement of resolutions beyond 4K30 4:4:4 and 4K60 4:2:0. DSC is a lightweight, line-based 2:1 compression standard that delivers visually lossless performance for 4K60 4:4:4 and HDR signals.[2] DSC is applied to 4K60 4:4:4 and HDR input signals only. All other signals are transported uncompressed.

        An existing 4K DigitalMedia system can be upgraded to handle 4K60 4:4:4 and HDR video with the installation of DM 4KZ cards, transmitters, and receivers. The upgrade can be accomplished without the need to replace wiring or switchers. The DMC-4KZ-HDO can replace a DMC-4K-HDO output card in an existing installation (additional programming may be required).

        4K60 4:4:4 Scaler
        An independent, high-performance 4K60 4:4:4 scaler is provided for each output to ensure that input sources of any resolution or frame rate can be routed and displayed reliably on virtually any display device without compromising the original input signal.

        As part of a DM® switcher with many outputs, any video or computer source can be viewed simultaneously on multiple disparate displays, scaling the signal up or down to match the native resolution of each display.

        Interlaced sources are converted to progressive scan using motion-adaptive deinterlacing. Intelligent frame rate conversion enables support for 24p and PAL format sources. Fully automatic operation eliminates any complicated setup by utilizing the EDID (Extended Display Identification Data) to configure each scaler.

        Video Wall Processing
        The DMC-4KZ-HDO provides zoom capability and bezel compensation on each HDMI output to display only a portion of the source image. Multiple DMC-4KZ-HDO cards can be combined to provide processing for a video wall composed of up to 64 individual displays. Video wall configurations up to 8 wide by 8 high are supported using a separate output for each display and one or more DM switchers.

        Audio De-embedding
        Each HDMI output on the DMC-4KZ-HDO is accompanied by a balanced/unbalanced analog audio output, allowing stereo audio signals to be extracted from the digital stream and fed to a sound system.[3] The output volume is adjustable via a control system using a keypad, touch screen, handheld remote, or mobile device.

        CEC Embedded Device Control
        When connected to a control system via a DM switcher, the DMC-4KZ-HDO provides a gateway for controlling display devices through CEC (Consumer Electronics Control) over the HDMI outputs, potentially eliminating the need for dedicated control wires or IR emitters.

        To configure a DM switcher with input cards, output cards, cables, and other peripherals, use the online DigitalMedia Switcher Configuration Tool.

        Are you upgrading an existing DM switcher that has multi-gang DMCO Series output cards? Use the online Output Card Additions and Upgrades Tool to update your existing output cards and switcher to the single-gang output card format.

        Refer to the DigitalMedia web page at http://www.crestron.com/digitalmedia for additional design tools and reference documents.

         
        Key Features
        • Modular output card for card-based DigitalMedia™ switchers
        •  Handles UHD and 4K video resolutions up to 4K60 4:4:4
        •  Handles HDR (High Dynamic Range) video (HDR10) and Deep Color
        •  Provides two independent HDMI® outputs
        •  Includes a discrete 4K60 4:4:4 scaler for each HDMI output
        •  Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
        •  HDCP 2.2 compliant
        • Supports video wall configurations of up to 8 x 8
        • Provides an analog stereo audio output for each HDMI output
        • Audio de-embedding of stereo 2-channel audio signals
        • Enables device control via CEC (Consumer Electronics Control)
        • Occupies a single DM® switcher output card slot
        1. DVI is supported via either HDMI output with the use of an appropriate adapter or interface cable. CBL-HD-DVI interface cables are available separately.
        2. 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps can be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
        3. The analog stereo audio outputs are active only when the selected input source is transmitting a 2-channel stereo signal. For applications using multichannel surround sound sources, the DM switcher should be equipped with DSP type input cards, which can downmix the surround sound signals to stereo.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How‑To‑Buy/Find‑a‑Representative or by calling 855‑263‑8754.

        The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, DigitalMedia, and DM are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI is either a trademark or registered trademark of HDMI Licensing LLC in the United States and/or other countries. VESA is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2019 Crestron Electronics, Inc.

         
        4K HDCP 2.2
        Video
        Scalers (2) 4K60 4:4:4 video scalers with motion-adaptive deinterlacer, intelligent frame rate conversion, Deep Color support, HDR10 support, content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect ratio, or 1:1), video wall processing up to 8 wide x 8 high using multiple cards
        Output Signal Types HDMI with HDR10, Deep Color, and 4K60 4:4:4 support [2]
        Copy Protection HDCP 2.2
        Maximum Resolutions: Common resolutions are shown below. Custom resolutions are supported at pixel clock rates up to 600 MHz.
         
        Scan
        Type
        Resolution Frame
        Rate
        Color
        Sampling
        Color
        Depth
        Progressive 4096x2160 DCI 4K
        and
        3840x2160 4K UHD
        24 Hz 4:4:4 36 bit
        30 Hz 4:4:4 36 bit
        60 Hz 4:2:2 36 bit
        60 Hz 4:4:4 24 bit
        2560x1600 WQXGA 60 Hz 4:4:4 36 bit
        1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
        Interlaced (input only) 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
        Audio
        Output Signal Types HDMI, analog stereo [3]
        Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
        Analog Formats Stereo 2-channel [3]
        Digital-To-Analog Conversion 24-bit 48 kHz
        Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
        S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted;
        THD+N: <0.005% @ 1 kHz;
        Stereo Separation: >90 dB
        Analog Volume Adjustment -80 to 0 dB
        Communications
        HDMI HDCP 2.2, EDID, CEC
        NOTE: Supports management of CEC between the connected HDMI device(s) and a control system.
        Connectors
        HDMI (2) 19-pin Type A connectors, female;
        HDMI digital video/audio outputs (DVI compatible [1])
        L,R (2) 5-pin 3.5 mm detachable terminal blocks;
        Balanced/unbalanced stereo line-level audio outputs [3];
        Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
        Construction
        Plug-in card, occupies (1) DM switcher output card slot, includes metal faceplate with black finish
        Weight
        10.7 oz (304 g)
        1. DVI is supported via either HDMI output with the use of an appropriate adapter or interface cable. CBL-HD-DVI interface cables are available separately.
        2. 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps can be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
        3. The analog stereo audio outputs are active only when the selected input source is transmitting a 2-channel stereo signal. For applications using multichannel surround sound sources, the DM switcher should be equipped with DSP type input cards, which can downmix the surround sound signals to stereo.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How‑To‑Buy/Find‑a‑Representative or by calling 855‑263‑8754.

        The specific patents that cover Crestron products are listed online at www.crestron.com/legal/patents.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, DigitalMedia, and DM are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI is either a trademark or registered trademark of HDMI Licensing LLC in the United States and/or other countries. VESA is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2019 Crestron Electronics, Inc.