Products

    Pages

        DMB-4K-I-HD

        8-Channel 4K HDMI® Input Blade for DM® Switchers

        Provides eight HDMI® inputs for any DigitalMedia™ Switcher with modular input blade slots.

        The DMB-4K-I-HD is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® inputs with complementary analog audio inputs.[1] The HDMI inputs are each capable of handling Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2 [2], Deep Color, 3D, and high-bitrate 7.1 audio. The analog audio inputs are enabled using the optional Analog Audio Breakout Box, which provides support for balanced or unbalanced stereo line-level signals.

        Note: Older units with Crestron Material # 6506006 support HDCP 1.2 only. A hardware replacement using Material # 6507801 is required to enable support for HDCP 2.2.

        4K Ultra HD
        All inputs on the DMB-4K-I-HD are capable of handling video resolutions up to 4K and Ultra HD. Support for 4K video also ensures support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA.

        Analog Audio Embedding
        Each HDMI input on the DMB-4K-I-HD is accompanied by a balanced analog audio input, allowing stereo analog audio signals to be embedded with the digital video signal. The analog audio inputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602).[1]

        CEC Embedded Device Control
        DigitalMedia offers an alternative to conventional RS-232 and IR display control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system (via the DM switcher), the DMB-4K-I-HD provides a gateway for controlling display devices right through their HDMI connections, potentially eliminating the need for any dedicated control wires or IR emitters.

        Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.

         
        Key Features
        • Modular input blade for a DM-MD64X64 or DM-MD128X128 switcher
        • Provides eight independent 4K HDMI® inputs
        • Handles video resolutions up to 4K and Ultra HD
        • Handles 3D video and Deep Color
        • Handles Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio
        • Analog audio inputs enable stereo audio embedding via the optional AUD-BOB-1602 breakout box [1]
        • Enables device control via CEC
        • HDCP 2.2 compliant [2]
        • Occupies a single DM switcher input blade slot
        1. Analog audio input capability requires the optional Analog Audio Breakout Box, model AUD-BOB-1602, sold separately.
        2. Older units with Crestron Material # 6506006 support HDCP 1.2 only. A hardware replacement using Material # 6507801 is required to enable support for HDCP 2.2.
        3. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, DigitalMedia, and DM are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        4K
        Video
          Input Signal Types HDMI w/Deep Color, 3D, & 4K (DVI & Dual-Mode DisplayPort compatible [3])
           
        Maximum Resolutions
         
        Scan
        Type
        Resolution Frame
        Rate
        Color
        Sampling
        Color
        Depth
        Progressive 4096x2160 DCI 4K
        &
        3840x2160 4K UHD
        24 Hz 4:4:4 30 bit
        30 Hz 4:4:4 24 bit
        30 Hz 4:2:2 36 bit
        60 Hz 4:2:0 24 bit
        2560x1600 WQXGA 60 Hz 4:4:4 36 bit
        1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
        Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
          NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
        Audio
          Input Signal Types HDMI (Dual-Mode DisplayPort compatible [3]), analog stereo [1]
          Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
          Analog Formats Stereo 2-channel [1]
          Analog-To-Digital Conversion 24-bit 48 kHz
          Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
        S/N Ratio: >95 dB, 20 Hz to 20 kHz A-weighted;
        THD+N: <0.005% @ 1 kHz;
        Stereo Separation: >80 dB
          Analog Input Compensation ±10 dB
        Communications
          HDMI HDCP 2.2 [2], EDID, CEC
          NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system
        Connectors
          INPUT HD 1 – 8 (8) 19-pin Type A HDMI female;
        HDMI digital video/audio inputs;
        (DVI and Dual-Mode DisplayPort compatible [3])
          ANALOG AUDIO INSERT (1) 68-pin VHDCI female;
        Connects to external analog audio breakout box, model AUD-BOB-1602 [1];
        Input Impedance: 10k Ohms balanced/unbalanced;
        Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced
        Indicators
          ACT (1) Green LED, indicates blade activity
          MSG (1) Red LED, indicates an error message has been generated
          INPUT HD 1 – 8 (8) Bi-color red/green LEDs, indicate video lock and HDCP status for each corresponding input
        Construction
         

        Plug-in blade, occupies (1) DM switcher input blade slot, includes metal faceplate w/black finish

        Weight
          1.6 lb (726 g)
        1. Analog audio input capability requires the optional Analog Audio Breakout Box, model AUD-BOB-1602, sold separately.
        2. Older units with Crestron Material # 6506006 support HDCP 1.2 only. A hardware replacement using Material # 6507801 is required to enable support for HDCP 2.2.
        3. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, DigitalMedia, and DM are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

        Online Help

        DigitalMedia™ Insider.
        Resources and tools you need for navigating Digital Video technologies. As Digital Video becomes more prominent in the A/V market place there becomes a growing need to keep up with the latest trends and changes the industry is seeing. Crestron has recognized these needs and has now created the Crestron "DM Insider". The DM Insider will allow Crestron to organize a single easy to use resource for all information as it pertains to DigitalMedia. Additional, once you subscribe to the DM Insider, [click the "notify me" icon] you will automatically receive an email when any of the resources listed below are updated, so, if a change is made, if a new document gets posted you will know right away.
        Online Help Answer ID :5100