Products

    Pages

        DMCF-RX-4K-SR PAK KIT

        DigitalMedia™ SFP+ 4K Fiber Receiver Card for DMF-CI-8, includes SFP-10G-SR SFP+ Transceiver Module for Duplex Multimode Fiber

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Provides one half of a Crestron® 4K video-over-fiber signal extender. Support point-to-point signal extension, and may also be used to add 4K fiber input capability to a DigitalMedia™ switcher. Installs in the DMF-CI-8 DigitalMedia™ SFP+ 4K Fiber Extender Card Chassis.

        The DMCF-RX-4K-SFP is a fiber-based receiver card designed to function as part of a Crestron® 4K video signal extender solution. It is used with a companion transmitter (DMF-TX-4K-SFP or DMCF-TX-4K-SFP [1]) to support point-to-point signal extension, and may also be used to add 4K fiber input capability to a DigitalMedia™ switcher (see “DM® Switcher Integration” below for details).

        The DMCF-RX-4K-SFP installs in any slot of a DMF-CI-8 card chassis.[1] Its “DM IN” port allows for the insertion of an appropriate SFP+ transceiver module to enable compatibility with multimode or single-mode fiber.[2] It also features a built-in 4K/60 scaler, HDMI® and analog audio outputs, a local HDMI input, and a gigabit Ethernet LAN port.

        4K Ultra HD
        The DMCF-RX-4K-SFP enables uncompressed 4K/60 video signal extension over fiber optic cable. Support for 4K video ensures support for the latest generation of computers and monitors with native resolutions beyond 1080p and WUXGA. The DMCF-RX-4K-SFP can handle uncompressed Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for Deep Color and HDCP 2.2. Audio capabilities include support for high-bitrate 7.1 audio formats like Dolby® TrueHD, Dolby Atmos®, and DTS-HD Master Audio™ as well as uncompressed linear PCM.

        DM® Switcher Integration
        The DMCF-RX-4K-SFP works integrally with a DM-MD series matrix switcher to facilitate routing of 4K video and control signals over fiber optic cable. Setup requires simply installing the DMCF-RX-4K-SFP in a DMF-CI-8 card chassis and connecting its HDMI output to an available HDMI input on the switcher. An Ethernet LAN connection is also required to enable communication with the associated control system.[3]

        SFP+ Configurable DM Port
        The “DM IN” port on the DMCF-RX-4K-SFP is configurable using SFP+ transceiver modules to enable compatibility with multimode or single-mode fiber types.[2] Each DMCF-RX-4K-SFP is sold as a packaged kit containing the receiver card and one SFP+ module as follows:

        • DMCF-RX-4K-SR PAK KIT – Supports duplex multimode fiber at up to 1000 ft (300 m) using OM3, or 1300 ft (400 m) using OM4
        • DMCF-RX-4K-BX PAK KIT – Supports simplex single-mode fiber at up to 6.2 miles (10 km) using ITU-T G.652.D fiber, Crestron model CRESFIBER8G-SM-P or equivalent
        • DMCF-RX-4K-S PAK KIT – Supports legacy CresFiber® 8G Multimode fiber at up to 650 ft (200 m) (Only for retrofit applications where Crestron CRESFIBER8G-NP or CRESFIBER8G-P is already installed; not for new installations!)

        Local HDMI® Input
        In addition to its DM input port, the DMCF-RX-4K-SFP also includes an HDMI input, which can be used to connect any HD or 4K source. Switching between the DM and HDMI inputs can be done automatically using auto-switching mode or programmatically via a Crestron control system.

        Analog Audio De-Embedding
        A balanced analog audio output is included to allow stereo audio signals to be extracted from the digital output and fed to a separate audio switcher, processor, or amplifier. The output volume is adjustable via a control system.[4]

        4K/60 Scaler
        Built-in Crestron 4K/60 scaling technology ensures that input sources of any resolution or frame rate can be routed and displayed reliably. The DMCF-RX-4K-SFP accepts any input resolution from standard definition NTSC 480i to ultra high-definition DCI 4K, and scales it beautifully to any output resolution up to DCI 4K (4096 x 2160 @ 60 Hz). Interlaced sources are converted to progressive scan using motion-adaptive deinterlacing. Intelligent frame rate conversion enables support for 24p and PAL format sources. Fully automatic operation eliminates any complicated setup.

        Dynamic Text Overlay
        Dynamic text overlay capability allows for labeling of the video image, or can be used to display instructions, schedules, alerts, or other messaging.

        Gigabit LAN Connectivity
        The DMCF-RX-4K-SFP includes a gigabit Ethernet port for integration with a Crestron control system via the local network. Ethernet is also transported over the fiber interface, eliminating the need for a separate LAN connection at the transmitter, and allowing the transmitter’s LAN port to be used to provide LAN connectivity for a local computer or other device.[3]

        CEC Embedded Device Control
        DigitalMedia offers an alternative to conventional RS-232 or IR control methods by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system, the DMCF-RX-4K-SFP provides a gateway for controlling devices through their HDMI connections, potentially eliminating the need for any dedicated control wires or IR emitters.

        Web Browser Setup
        Simplified setup of the DMCF-RX-4K-SFP and its companion transmitter is facilitated using a web browser.

        Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.

         
        Key Features
        • Uncompressed 4K video signal extension over fiber optic cable
        • Configurable for multimode or single-mode fiber using SFP+ transceiver modules [2]
        • Seamless integration with DM® switchers to enable 4k fiber input capability
        • Built-in 4K/60 scaler
        • HDCP 2.2 compliant
        • Dolby® TrueHD, Dolby Atmos®, DTS-HD®, and uncompressed 7.1 linear PCM audio support
        • HDMI® output
        • Auto-switching HDMI input
        • Balanced analog stereo audio output [4]
        • Stereo HDMI-to-analog audio de-embedding
        • CEC device control gateway
        • Dynamic text overlay
        • Gigabit Ethernet LAN port
        • Web browser setup
        • Occupies one card slot of a DMF-CI-8
        • Requires a DMF or DMCF series transmitter
        1. Item(s) sold separately.
        2. The DM port on this device is designed for use with Crestron SFP-10G series SFP+ transceiver modules only. The fiber interface provided by the SFP+ module is exclusively for connection to a Crestron DMF or DMCF series transmitter device. It is not compatible with older Crestron DM Fiber (-F type), DM 8G® Fiber (-S type), or DM 8G SM Fiber (-S2 type) devices.
        3. The LAN connection can be made via the local LAN port on the DMCF-RX-4K-SFP, or via the LAN port on the companion transmitter, but not both.
        4. The analog stereo audio output is only active when the DMCF-RX-4K-SFP is receiving a 2-channel stereo input signal.
        5. Does not support pass-through or scaling of 3D video signals. 3D signals are automatically converted to 2D, then scaled and output as 2D.
        6. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, CresFiber, DigitalMedia, DM, DM 8G, and QuickSwitch HD are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.  DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries.  HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.

         
        4K HDCP 2.2
        Fiber Types
         
        Fiber Type Connector
        Type
        Maximum Cable Length SFP+ Module [2] Package Model
        Multimode, duplex, 850 nm Dual LC 1000 ft (300 m)
        using OM3;
        1300 ft (400 m)
        using OM4
        SFP-10G-SR DMCF-RX-4K-SR PAK KIT
        Single-mode, simplex, 1330/1270 nm Single LC 6.2 miles (10 km) SFP-10G-BX-D DMCF-RX-4K-BX PAK KIT
        CresFiber 8G Multimode, simplex
        (Only for retrofit applications where CresFiber 8G multimode fiber is already installed; not for new installations)
        Single SC
        (via LC-to-SC
        patch cord and adapter, included)
        650 ft (200 m)
        using
        CRESFIBER8G-NP
        or CRESFIBER8G-P
        SFP-10G-S-D DMCF-RX-4K-S PAK KIT
          Note: The maximum cable length for single-mode fiber is measured using ITU-T G.652.D fiber optic cable, Crestron model CRESFIBER8G-SM-P or equivalent.
        Video
          Input Signal Types DM SFP+ 4K Fiber w/Deep Color, 3D [5], & 4K support (configurable for multimode or single-mode fiber [2]); HDMI w/Deep Color, 3D [5], & 4K support (DVI & Dual-Mode DisplayPort compatible [6])
          Output Signal Types HDMI w/Deep Color & 4K support (DVI compatible [6])
          Switcher 2x1 auto-switching, Crestron QuickSwitch HD™ technology
          Scaler 4K video scaler with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, 3D to 2D conversion [5], widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), dynamic text overlay
           
        Maximum Resolutions
         
        Scan
        Type
        Resolution Frame
        Rate
        Color
        Sampling
        Color
        Depth
        Progressive 4096x2160 DCI 4K
        &
        3840x2160 4K UHD
        24 Hz 4:4:4 30 bit
        30 Hz 4:4:4 24 bit
        30 Hz 4:2:2 36 bit
        60 Hz 4:2:0 24 bit
        2560x1600 WQXGA 60 Hz 4:4:4 36 bit
        1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
        Interlaced
        (Input only)
        1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
          NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
        Audio
          Input Signal Types DM SFP+ 4K Fiber (configurable for multimode or single-mode fiber [2]), HDMI (Dual-Mode DisplayPort compatible [6])
          Output Signal Types HDMI, analog stereo [4]
          Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
          Analog Formats Stereo 2-channel
          Switcher 2x1 audio-follow-video
          Digital-To-Analog Conversion 24-bit 48 kHz
          Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
        S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted;
        THD+N: <0.005% @ 1 kHz;
        Stereo Separation: >90 dB
          Analog Volume Adjustment -80 to +20 dB
        Communications
          Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, IEEE 802.1X, IPv4 or IPv6, web browser setup and control, Crestron control system integration
          DM DM SFP+ 4K Fiber, HDCP 2.2, EDID, CEC, Ethernet
          HDMI HDCP 2.2, EDID, CEC
          NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system
        Connectors
          LAN (1) 8-pin RJ45 female;
        10Base-T/100Base-TX/1000Base-T Ethernet port
          DM IN (1) DM SFP+ 4K Fiber input port;
        Accepts one Crestron SFP-10G series SFP+ transceiver module (included as part of a DMCF-RX-4K PAK KIT)
          HDMI OUTPUT (1) 19-pin Type A HDMI female;
        HDMI digital video/audio output (DVI compatible [6])
          HDMI INPUT (1) 19-pin Type A HDMI female;
        HDMI digital video/audio input;
        (DVI & Dual-Mode DisplayPort compatible [6])
          AUDIO OUT (1) 5-pin 3.5 mm detachable terminal block;
        Balanced/unbalanced stereo line-level audio output [4];
        Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
        Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
        Indicators
          OL (1) Green LED, indicates online connection to a control system via Ethernet
          LAN (2) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
          DM IN LINK (1) Green LED, indicates DM link status
          DM IN ACT (1) Green LED, indicates DM link activity
          HDMI OUTPUT (1) Green LED, indicates video signal transmission at the HDMI output
          HDMI INPUT (1) Green LED, indicates sync detection at the HDMI input
        Construction
          Plug-in card, occupies (1) card slot in a DMF-CI-8 card interface, includes metal faceplate
        Weight
          15.1 oz (427 g)
        1. Item(s) sold separately.
        2. The DM port on this device is designed for use with Crestron SFP-10G series SFP+ transceiver modules only. The fiber interface provided by the SFP+ module is exclusively for connection to a Crestron DMF or DMCF series transmitter device. It is not compatible with older Crestron DM Fiber (-F type), DM 8G® Fiber (-S type), or DM 8G SM Fiber (-S2 type) devices.
        3. The LAN connection can be made via the local LAN port on the DMCF-RX-4K-SFP, or via the LAN port on the companion transmitter, but not both.
        4. The analog stereo audio output is only active when the DMCF-RX-4K-SFP is receiving a 2-channel stereo input signal.
        5. Does not support pass-through or scaling of 3D video signals. 3D signals are automatically converted to 2D, then scaled and output as 2D.
        6. HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, CresFiber, DigitalMedia, DM, DM 8G, and QuickSwitch HD are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.  DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries.  HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.

        Online Help

        DigitalMedia™ Insider.
        Resources and tools you need for navigating Digital Video technologies. As Digital Video becomes more prominent in the A/V market place there becomes a growing need to keep up with the latest trends and changes the industry is seeing. Crestron has recognized these needs and has now created the Crestron "DM Insider". The DM Insider will allow Crestron to organize a single easy to use resource for all information as it pertains to DigitalMedia. Additional, once you subscribe to the DM Insider, [click the "notify me" icon] you will automatically receive an email when any of the resources listed below are updated, so, if a change is made, if a new document gets posted you will know right away.
        Online Help Answer ID :5100