Products

    Pages

        CSS-ARCH5

        QMT5 Series Architectural Shade Hardware

        QMT5 Series Architectural Shade Hardware from Crestron® is a mounting system that allows Crestron shades to be surface-mounted on a wall or ceiling or to be recess-mounted in a pocket or window jamb.

        PHOTO: Single roll shade motorized mounting brackets shown

        NOTE: “CSS-ARCH5” is sold as part of a custom-configured product and orders are placed via the Crestron® Design Tool for Crestron Shading Solutions. This specification page is for informational purposes and shows the available parts for QMT5 Series Architectural Shade Hardware. To configure shades or order shading parts and accessories, please use the Crestron Design Tool for Crestron Shading Solutions or call 1-855-53-S-H-A-D-E (537-4233) for support.

        QMT5 Series Architectural Shade Hardware from Crestron® is a mounting system that allows Crestron shades to be mounted on a wall or ceiling or in a pocket or window jamb. The hardware offers solutions for both single roll and dual roll shade applications. Motorized operation is provided by the nearly silent Crestron CSM-QMTDC-250-4 Digital QMT® motor.[1] The motor integrates with a Crestron control system through wireless communication, enabling the shades to be easily adjusted from remote controls, keypads, and touch screens.

        The QMT motor snaps into its bracket and has a Quick Release button that makes installation and removal without any special tools quick and easy. Brackets that are left/right and up/down adjustable ensure mounting precision and shorten installation time by allowing the installer to make changes without removing and reinstalling the entire bracket.

        The QMT5 Series Architectural Hardware lineup also includes single roll shade brackets for manual operation. Manually operated shades are a cost-effective solution for any shading application. Whether for installations in which motorized shades are unnecessary or not feasible or as a stop-gap before upgrading to motorized shades, manual shades offer the small profile and reliable, easy-to-install hardware of a Crestron shading solution with minimum effort.

        Angled Coupler
        A specially designed coupler vastly increases the ease with which tandem shade configurations are installed.  Unique to the QMT5 Series Architectural Hardware, the angled coupler simplifies even the most complex of angular installation spaces.  It has the ability to hold two shades in tandem at any angle, making every bay window installation a breeze.

        Single Roll Shades Versus Dual Roll Shades
        Single roll shades are perfect for mounting shades in compact areas as small as 5” by 5” (127 mm x 127 mm). Dual shades hardware supports the installation of two roller shades with one set of brackets, allowing light-filtering and blackout fabrics within the same system for multipurpose rooms. Dual shades hardware requires an area 9” high by 6” deep (229 mm high x 153 mm deep).

        Fascia
        Decorative fascia conceals the front and bottom of the roller shade from view in non-pocket mounting applications. Sporting a clean look, it comes in square or curved options and features a variety of finishes to complement any décor. An optional top/back cover provides coverage for the top and back of the roller shade, perfect for when mounting shades inside window jambs. Installation of each part is easy because the fascia and top/back cover are tensioned fit and simply snap onto the mounting brackets. Stylish end caps also snap into place onto the brackets and match the color of the fascia.

        Pocket
        The pocket is a U-shaped extrusion that covers the front, top, and back of the shade roller. It is not intended for a direct wall mount application. A flap attaches to the inside of the pocket, covering as much of the shade roller’s underside from view as possible while still letting the shade fabric move up and down smoothly.

        If the application is using a customer-provided pocket and it requires a flap, a flap hanger is needed to hang the flap. The flap hanger is drilled into the inside surface of the customer-provided pocket, thereby giving the flap a place to mount.

        Blackout Accessories
        For an inside or outside mount installation, side channels enable blackout conditions by helping to prevent light leaks between the window jamb and shade fabric. Crestron offers two channel styles, the U-Channel and the H-Channel,[2] which are available in same finish colors as the fascia.

        The U-Channel is designed for a single window opening and is installed on the left and right sides of the shade. The H-Channel [2] installs between two adjacent shades, where it cuts down on light leaks between shades and provides a smooth path for shade fabric to travel as it unrolls.

        A sill angle helps to complete blackout treatments by reducing light leaks along the bottom of the window. Channel Caps provide a finished edge for smooth travel where the fabric enters the side channels.

        Hembars
        Crestron offers three hembar options: open pockets, sealed pockets, or blackout.

        • Open pockets are an appropriate choice when a designer does not want to add an additional architectural element to a partially drawn shade. In this style, the hem pocket has an opening at each end. Hembar end caps are supplied with an open pocket hem bar order, providing a finished look to the ends of the shade fabric.

        • Sealed pockets are most commonly found in commercial applications. The sealed ends have a pinched look and are less desirable in residential applications.

        • Blackout hembars are used for blackout scenarios. They have a liner across the bottom that helps to block light from entering a room when the shade is down.


        NOTE: Please download the PDF version of this spec sheet for images and dimensional drawings of each hardware component.

         
        Key Features
        • Hardware series for mounting Crestron® roller shades
        • Adjustable brackets for shade leveling without any hardware removal
        • Designed for use with Crestron CSM-QMTDC-250-4 Digital QMT® motors [1]
        • Optional brackets for manually operated shading solutions
        • Optional bracket for angled coupled shade installations
        • Fascia, top/back covers, and matching end caps
        • Aluminum pockets available for recessed mounting
        • Single roll shade brackets that fit into pockets as small as 5” x 5” (127 mm x 127 mm)
        • Blackout hardware for creating blackout scenarios in a room
        • Single roll or dual roll shade applications
        1. Available in models CSM-QMTDC-250-4-CN and CSM-QMTDC-250-4-EX.
        2. Because the H-Channel pertains to multiple window openings, it can only be ordered as an accessory, not as part of a shade.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, Cresnet, infiNET EX, QMT, and Quiet Motor Technology are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        Pyng
          NOTE: Please refer to the PDF version of this spec sheet for images and dimensional drawings of each hardware component.
        Mounting Brackets (Motorized)
          Single Mounting Brackets —
          Model Number CSA-ARCH5-BRKT
        (includes (1) motor side bracket and (1) idler side bracket)
          Available Finishes White only
          Height 4.50 in (115 mm) per bracket
          Width 1.75 in (45 mm) per bracket
          Depth 4.51 in (115 mm) per bracket
          Dual Mounting Brackets —
          Model Number CSA-ARCH5-BRKT-DUAL
        (includes (1) motor side bracket and (1) idler side bracket)
          Available Finishes White only
          Height 9.00 in (229 mm) per bracket
          Width 1.75 in (45 mm) per bracket
          Depth 6.00 in (153 mm) per bracket
        Mounting Brackets (Manual)
          Single Mounting Brackets —
          Model Number CSA-ARCH5-BRKT-MAN
        (includes (1) clutch side bracket and (1) idler side bracket)
          Available Finishes White only
          Height 4.50 in (115 mm) per bracket
          Width 1.75 in (45 mm) per bracket
          Depth 4.51 in (115 mm) per bracket
        Angled Coupler
          Single Roll Angled Coupler —
          Model Number CSA-ARCH5-ANGLED-COUPLER
          Available Finishes White only
          Height 4.44 in (113 mm)
          Width 3.63 in (92 mm)
          Depth 4.02 in (102 mm)
        End Caps
          Single Square End Caps —
          Model Number CSA-ARCH5-BRKT-CAP-SQR
        (includes (1) motor or clutch side end cap and (1) idler side end cap)
          Available Finishes White, Black, Gray, Brown, Almond
          Single Curved End Caps —
          Model Number CSA-ARCH5-BRKT-CAP-CRV
        (includes (1) motor or clutch side end cap and (1) idler side end cap)
          Available Finishes White, Black, Gray, Brown, Almond
          Dual Square End Caps —
          Model Number CSA-ARCH5-BRKT-DUAL-CAP-SQR
        (includes (1) motor side end cap and (1) idler side end cap)
          Available Finishes White, Black, Gray, Brown, Almond
          Dual Curved End Caps —
          Model Number CSA-ARCH5-BRKT-DUAL-CAP-CRV
        (includes (1) motor side end cap and (1) idler side end cap)
          Available Finishes White, Black, Gray, Brown, Almond
        Fascia
          Single Square Fascia —
          Model Number CSA-ARCH5-FASCIA-SQR
          Available Finishes White, Black, Gray, Brown, Almond
          Height 4.68 in (119 mm)
          Width Up to 16 ft (4.88 m)
          Depth 3.10 in (79 mm)
          Single Curved Fascia —
          Model Number CSA-ARCH5-FASCIA-CRV
          Available Finishes White, Black, Gray, Brown, Almond
          Height 4.68 in (119 mm)
          Width Up to 16 ft (4.88 m)
          Depth 3.10 in (79 mm)
          Dual Square Fascia —
          Model Number CSA-ARCH5-FASCIA-DUAL-SQR
          Available Finishes White, Black, Gray, Brown, Almond
          Height 9.05 in (230 mm)
          Width Up to 16 ft (4.88 m)
          Depth 3.29 in (84 mm)
          Dual Curved Fascia —
          Model Number CSA-ARCH5-FASCIA-DUAL-CRV
          Available Finishes White, Black, Gray, Brown, Almond
          Height 9.05 in (230 mm)
          Width Up to 16 ft (4.88 m)
          Depth 3.29 in (84 mm)
        Top/Back Covers
          Single Top/Back Cover —
          Model Number CSA-ARCH5-TBC
          Available Finishes White, Black, Gray, Brown, Almond
          Height 4.57 in (117 mm)
          Width Up to 16 ft (4.88 m)
          Depth 4.51 in (115 mm)
          Dual Top/Back Cover —
          Model Number CSA-ARCH5-TBC-DUAL
          Available Finishes White, Black, Gray, Brown, Almond
          Height 9.12 in (232 mm)
          Width Up to 16 ft (4.88 m)
          Depth 6.05 in (154 mm)
        Pockets
          Single Pocket —
          Model Number CSA-ARCH5-POCKET
          Available Finishes White, Black, Gray, Brown, Almond
          Height 5.37 in (137 mm)
          Width Up to 16 ft (4.88 m)
          Depth 5.19 in (132 mm)
          Single Pocket w/Tile Lip —
          Model Number CSA-ARCH5-POCKET-TLIP
          Available Finishes White, Black, Gray, Brown, Almond
          Height 5.37 in (137 mm)
          Width Up to 16 ft (4.88 m)
          Depth 5.88 in (150 mm)
          Pocket Flap —
          Model Number CSA-ARCH5-FLAP
          Available Finishes White, Black, Gray, Brown, Almond
          Height 0.59 in (15 mm)
          Width Up to 16 ft (4.88 m)
          Depth 3.28 in (84 mm)
          Pocket Flap Hanger —
          Model Number CSA-ARCH-FLAP-HANGER
          Available Finishes White, Black, Gray, Brown, Almond
          Height 1.20 in (31 mm)
          Width Up to 16 ft (4.88 m)
          Depth 0.23 in (6 mm)
          Pocket Flap Hanger Tile Lip —
          Model Number CSA-ARCH-FLAP-HANGER-TLIP
          Available Finishes White, Black, Gray, Brown, Almond
          Height 1.20 in (31 mm)
          Width Up to 16 ft (4.88 m)
          Depth 0.92 in (23 mm)
        Blackout Accessories
          U-Channel —
          Model Number CSA-ARCH-BO-CHANNEL-U
          Available Finishes White, Black, Gray, Brown, Almond
          Width 2.50 in (64 mm)
          Depth 1.00 in (26 mm)
          H-Channel —
          Model Number CSA-ARCH-BO-CHANNEL-H
          Available Finishes White, Black, Gray, Brown, Almond
          Width 5.00 in (127 mm)
          Depth 1.00 in (26 mm)
          Sill Angle —
          Model Number CSA-ARCH-BO-SILL
          Available Finishes White, Black, Gray, Brown, Almond
          Height 1.75 in (45 mm)
          Depth 1.09 in (28 mm)
          Channel Cap —
          Model Number CSA-ARCH-BO-CHANNEL CAP
          Available Finishes White, Black, Gray, Brown, Almond
        1. Available in models CSM-QMTDC-250-4-CN and CSM-QMTDC-250-4-EX.
        2. Because the H-Channel pertains to multiple window openings, it can only be ordered as an accessory, not as part of a shade.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, Cresnet, infiNET EX, QMT, and Quiet Motor Technology are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.