Products

    Pages

        CLXI-1MC4

        4 Channel Motor Control Module, Single Feed - International Version, 230V

        As part of a complete Crestron lighting system, the CLXI-1MC4 motor control module provides control of up to 4 bidirectional motors for drapes, blinds, projection screens, lifts, etc. Each channel is rated for 8 Amps or 1 HP, with a total module rating of 13 Amps.

        As part of a complete Crestron lighting system, the CLXI-1MC4 motor control module provides control of up to 4 bidirectional motors for drapes, blinds, projection screens, lifts, etc. Each channel is rated for 8 Amps or 1 HP, with a total module rating of 13 Amps.

        The CLXI-1MC4 occupies a single module space in any CAEN or CAENIB automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLTI-1MC4 terminal block, sold separately to enable termination of the wiring anytime prior to installing the module. CLXI modules are controlled by the PAC2 and PAC2M professional automation control systems via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).

         
         
        Load Ratings
          Motor Control Channels 4
          Per Channel 8 Amps, 1 HP
          Module Total 13 Amps
          Load Types 3-Wire Bidirectional Motors
        Power Requirements
          230 Volts AC, 50/60Hz, single-phase
        Connectors on Module
          Module Interconnect (2) 5-pin 0.156 inch headers;
        Cresnet/Override interconnect ports;
        Connect to PAC2, PAC2M, CAEN-BLOCK, or adjacent CLXI-Series module using interconnect cable provided
        Connections via CLTI or CLTIBN Terminal Block (sold separately)
          LINE (1) DIN rail terminal block, brown, line power input
          OPEN 1 - 4 (4) DIN rail terminal blocks, red;
        Channel outputs "open"
          CLOSE 1 - 4 (4) DIN rail terminal blocks, yellow;
        Channel outputs "close"
          N IN (1) DIN rail terminal block, blue, line input neutral
          N OUT 1 - 4 (4) DIN rail terminal blocks, blue, channel output neutrals
        Buttons
          SETUP Used for TSID
        LED Indicators
          PWR (green) Indicates line power is applied to the LINE terminal
          NET (yellow) Indicates communication with the control system
          1 – 8 (red x8) Indicates state of each channel
          SETUP (red) Indicates unit is in setup/manual mode
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 21 BTU/Hr at maximum load
        Enclosure
          Gray metal with black heat sink, surface mount module with (2) integral mounting flanges;
        Occupies 1 module space in any CAEN or CAENIB enclosure
        Dimensions
          Height 7.59 in (19.27 cm)
          Width 6.92 in (17.57 cm)
          Depth 3.43 in (8.70 cm)
        Weight
          3.00 lb (1.36 kg)