Products

    Pages

        C2N-SDC

        Shade and Drape Controller, 2 outputs for 120 VAC 3-wire bidirectional motors

        The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens.

        The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens. The C2N-SDC is a Cresnet® device with two independently controlled 120V AC outputs. Each output provides up/down or open/close control of a conventional three-wire bidirectional type motor. Built-in timing and interlock logic make it easy to program the C2N-SDC for failsafe operation.

        The C2N-SDC mounts in the wall or ceiling using an off-the-shelf 4" square or 2-gang electrical box. Pushbuttons on the front of the unit allow for manual operation of the motors during installation and setup.

         

          This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

          Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

          Crestron, the Crestron logo, and Cresnet are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.

           
          Load Ratings
            Motor Control Channels 2
            Per Channel 7.5 Amps, 1/3 HP
            Total 15 Amps
            Load Types 3-Wire 120V AC bidirectional motors
          Power Requirements
            Line Power 120 Volts AC, 50-60Hz, single-phase
            Cresnet Power Usage 3 Watts (0.125 Amps @ 24 Volts DC)
          Connections (rear)
            Hot (1) Class 1 flying lead, 14 AWG, black, line power input
            Neutral (1) Class 1 flying lead, 14 AWG, white, neutral
            Ground (1) Class 1 flying lead, 14 AWG, green, ground
            Load 1 - 2 (2) 4-pin terminal blocks comprising (2) independent 120V AC 3-wire bidirectional motor control outputs;
          Includes terminals for up/open drive (U), down/close drive (D), common/neutral (C), and ground;
          Maximum Wire Size: 14 AWG
          Connectors (front)
            NET (2) 4-pin 3.5mm detachable terminal blocks;
          Cresnet slave ports, paralleled;
          Connect to Cresnet control network
          Buttons
            1 UP/DOWN (2) buttons for local control of output #1
            2 UP/DOWN (2) buttons for local control of output #2
            SETUP (1) button used for touch-settable ID (TSID)
          LED Indicators
            PWR (green) Indicates DC power supplied from Cresnet network
            NET (yellow) Indicates communication with the Cresnet system
            SETUP (red) used for touch-settable ID (TSID)
          Environmental
            Temperature 41° to 122°F (5° to 50°C)
            Humidity 10% to 90% RH (non-condensing)
          Enclosure
            Flat metal plate mountable in a 4-inch square or 2-gang electrical box, 1.5 inch minimum depth; mount 2-gang box horizontally to maintain correct orientation
          Dimensions
            Height 4.10 in (104.1 mm)
            Width 4.10 in (104.1 mm)
            Depth 1.15 in (29.2 mm)
          Weight
            0.55 lb (0.25 kg)

            This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

            Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

            Crestron, the Crestron logo, and Cresnet are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.