Products

    Pages

        ZUMMESH-KP10A-W-S

        Zum™ Wireless Keypad, Rocker Switch, 100-277V, White Smooth

        An AC-powered wireless keypad for controlling Zūm™ J-Box Load Controllers.
         

        Faceplate sold separately.

        The Zūm™ Wireless Keypad (ZUMMESH-KP) provides control of one or more Zūm J-Box Load Controllers (ZUMMESH-JBOX [1]). It is available with either a single rocker switch or four pushbuttons. The rocker switch version offers simple on/off switching and dimming adjustment, with the ability to save one scene preset. The pushbutton version supports the same capabilities with three scene presets. Standard gang-box installation allows one or more units to be installed in a 3-1/2 inch (89 mm) deep electrical box. A finished installation requires a decorator-style faceplate (sold separately).

        ZUMMESH-KP keypads are 100-277 Volts AC line powered. Zūm Mesh wireless technology affords easy “pair and play” setup and integration as part of a complete Zūm commercial room lighting system.

        Switch and Button Options
        There are two versions of the ZUMMESH-KP as follows:

        • ZUMMESH-KP10A – Provides a single rocker switch for on/off switch control, with the ability to adjust the dim level up or down by pressing and holding the switch. A single custom scene preset can be created, which is recalled when turning the lights on by pressing the up position on the rocker switch.

        • ZUMMESH-KP10B – Provides four pushbuttons labeled ON, SCENE 2, SCENE 3, and OFF. Three scene presets can be created and recalled, with Scene 1 assigned to the ON button. Manual dimming adjustment is achieved by pressing and holding the ON (up) and OFF (down) buttons.

        Pair and Play
        Designed with flexibility and ease-of-use in mind, Zūm keypads are pre-programmed with “pair and play” functionality. An installer can simply install the keypad in a room along with Zūm load controllers, occupancy or vacancy sensors, and a daylight sensor, set up the room with a few quick button taps, and then use the keypad to control the lights in the room – no programming required! Room setup can also be accomplished using the Zūm app if the room is equipped with a Zūm Network Bridge. The Zūm Network Bridge also enables centralize monitoring and management via a Zūm Floor Hub and Zūm Net Wireless Gateway.[1]

        Zūm Mesh Wireless Technology
        Ultra-reliable Zūm Mesh wireless technology provides steadfast peer-to-peer RF communications within a commercial space without the need for physical control wiring, hubs, or gateways. Employing a Wi-Fi® friendly 2.4 GHz peer-to-peer mesh network topology, nearly every Zūm Mesh device acts as a “routing node,” relaying wireless commands directly between Zūm Mesh devices to ensure that every command reaches its intended destination without disruption.

        Zūm Mesh is smart! Every Zūm Mesh device knows its purpose and just the right messages to communicate to other Zūm Mesh devices within the space. Each Zūm Mesh device that is added to the space effectively increases the range and stability of the peer-to-peer mesh network by providing multiple redundant signal paths. Each Zūm Mesh device auto-negotiates its RF channel to provide robust communication and is protected through AES 128 bit encryption. The wireless range between any two Zūm Mesh devices is typically 50 feet (15 meters).[2]

        Please refer to the Zūm Lighting Control System Setup Guide (Doc # 7957) for additional information.

         
        Key Features
        • AC-powered Zūm™ wireless keypads
        • Pair and play control of one or more Zūm J-Box Load Controllers [1]
        • Zūm Mesh peer-to-peer RF communications for easy integration into a complete standalone or networked Zūm wireless lighting control solution [2]
        • Choice of single rocker switch or four pushbuttons
        • Up to three scene presets with pushbutton version
        • 100-277 Volts AC line powered
        • Flying lead wiring connections
        • Standard 3-1/2 inch (89 mm) deep electrical box installation
        • Available in smooth black, white, almond, gray, or red finish
        • Matching decorator-style faceplate available separately
        • Meets UL® 916 standard for energy management equipment
        • Meets CEC Title 24 energy efficiency standards [3]
        • Meets ASHRAE® 90.1 energy efficiency standards [4]
        • ICC® International Energy Conservation Code® compliant [5]
        1. Item(s) sold separately. Refer to each product’s spec sheet for more information.
        2. “Zūm Mesh” refers to the peer-to-peer wireless mesh network within a room composed of dimmers, switches, load controllers, keypads, and sensors. AC-powered Zūm Mesh devices function as routing nodes, which effectively extend the range of the wireless network within the room. Battery-powered devices only function as leaf nodes and do not extend range. Networks composed predominantly of battery-powered devices may require additional AC-powered devices, such as the ZUMMESH-JBOX-PSU, to serve as supplemental routing nodes to fill any gaps in coverage. Refer to the “Installation and Setup of Crestron RF Products, Best Practices” guide (Doc #6689) for additional guidelines.
        3. This product is part of a California Energy Commission Title 24 compliant solution. Refer to http://www.energy.ca.gov/title24/ to learn more about designing a fully compliant solution. Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at http://www.crestron.com/about/partner-info/commercial-lighting-consultants.
        4. This product is part of an ASHRAE 90.1 compliant solution. Refer to https://www.ashrae.org/ to learn more about designing a fully compliant solution. Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at http://www.crestron.com/about/partner-info/commercial-lighting-consultants.
        5. This product is part of an International Energy Conservation Code compliant solution. Refer to https://www.iccsafe.org/iecc/ to learn more about designing a fully compliant solution. Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at http://www.crestron.com/about/partner-info/commercial-lighting-consultants.

        This product may be purchased from an authorized Crestron dealer or distributor. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at http://www.crestron.com/about/partner-info/commercial-lighting-consultants. For assistance with incorporating this product into a design or specification, please contact the Commercial Lighting Consultant Hotline via email at clcdesign@crestron.com or by calling 888-330-1502.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, and Zūm are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. ASHRAE is either a trademark or registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. in the United States and/or other countries. ICC and International Energy Conservation Code are either trademarks or registered trademarks of International Code Council, Inc. in the United States and/or other countries. UL is either a trademark or registered trademark of UL LLC in the United States and/or other countries. Wi-Fi is either a trademark or a registered trademark of Wi-Fi Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        Wireless Communications
          RF Transceiver Zūm Mesh 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant
          Range 50 ft (15 m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities [2]
          Note: A maximum of 32 Zūm Mesh wireless devices is permitted per room.
        Controls & Indicators
          Switch
        (-KP10A models)
        (1) 3-Position rocker switch (spring return to center); press up to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]), press down to turn all lighting loads off, press and hold up or down to raise or lower the dimming level for all dimmable lighting loads; also used for creating a preset, room setup, and factory reset
          Buttons
        (-KP10B models)
        ON: Press to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]), press and hold to raise the dimming level for all dimmable lighting loads;
        SCENE 2: Press to recall the Scene 2 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 2 preset;
        SCENE 3: Press to recall the Scene 3 preset (switched loads on and dimmed loads at their saved preset dim levels [default=10%]), press and hold to save a new Scene 3 preset;
        OFF: Press to turn all loads off, press and hold to lower the dimming level for all dimmable lighting loads;
        Buttons are also used for creating presets, room setup, and factory reset
          Feedback (1) Green LED, indicates a button press; also used for creating presets, room setup, and factory reset
        Connections
          Hot (1) 16 AWG Class 1 flying lead, black, line power input
          Neutral (1) 16 AWG Class 1 flying leads, white, neutral
          Ground (1) 16 AWG Class 1 flying lead, green, ground
        Power
          Line Power 100-277 Volts AC, 50/60 Hz
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
        Construction
          Composition Plastic housing and front face with metal bracket
          Mounting Mounts in a 1-gang (or larger) 3-1/2 inch (89 mm) deep electrical box (not included)
          Faceplate Requires a decorator-style faceplate (sold separately)
        Dimensions
          Height 4.13 in (105 mm)
          Width 1.75 in (45 mm)
          Depth 1.80 in (46 mm)
        Weight
          5 oz (142 g)
        Compliance
          UL Listed for US & Canada, IC, FCC Part 15 Class A digital device, UL 916, CEC Title 24 [3], ASHRAE 90.1 [4], IECC [5]
        1. Item(s) sold separately. Refer to each product’s spec sheet for more information.
        2. “Zūm Mesh” refers to the peer-to-peer wireless mesh network within a room composed of dimmers, switches, load controllers, keypads, and sensors. AC-powered Zūm Mesh devices function as routing nodes, which effectively extend the range of the wireless network within the room. Battery-powered devices only function as leaf nodes and do not extend range. Networks composed predominantly of battery-powered devices may require additional AC-powered devices, such as the ZUMMESH-JBOX-PSU, to serve as supplemental routing nodes to fill any gaps in coverage. Refer to the “Installation and Setup of Crestron RF Products, Best Practices” guide (Doc #6689) for additional guidelines.
        3. This product is part of a California Energy Commission Title 24 compliant solution. Refer to http://www.energy.ca.gov/title24/ to learn more about designing a fully compliant solution. Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at http://www.crestron.com/about/partner-info/commercial-lighting-consultants.
        4. This product is part of an ASHRAE 90.1 compliant solution. Refer to https://www.ashrae.org/ to learn more about designing a fully compliant solution. Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at http://www.crestron.com/about/partner-info/commercial-lighting-consultants.
        5. This product is part of an International Energy Conservation Code compliant solution. Refer to https://www.iccsafe.org/iecc/ to learn more about designing a fully compliant solution. Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at http://www.crestron.com/about/partner-info/commercial-lighting-consultants.

        This product may be purchased from an authorized Crestron dealer or distributor. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        Additional resources can be accessed via the Crestron Commercial Lighting Consultants Partner Portal at http://www.crestron.com/about/partner-info/commercial-lighting-consultants. For assistance with incorporating this product into a design or specification, please contact the Commercial Lighting Consultant Hotline via email at clcdesign@crestron.com or by calling 888-330-1502.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, and Zūm are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. ASHRAE is either a trademark or registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. in the United States and/or other countries. ICC and International Energy Conservation Code are either trademarks or registered trademarks of International Code Council, Inc. in the United States and/or other countries. UL is either a trademark or registered trademark of UL LLC in the United States and/or other countries. Wi-Fi is either a trademark or a registered trademark of Wi-Fi Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.