Products

    Pages

        GLA-IR-VS-2-W

        STEINEL IR VS 2 Passive Infrared Dual Relay Wall Switch Vacancy Sensor, White

        A line voltage, two relay, Passive Infrared (PIR) wall switch vacancy sensor to control bi-level lighting in commercial spaces.

         

        As part of our endeavour to deliver professional lighting and control solutions for the entire enterprise, Crestron is pleased to offer STEINEL PROFESSIONAL products, which are available for sale through authorized Crestron Commercial Lighting system integrators.

        Based in Germany, STEINEL PROFESSIONAL has been manufacturing lighting controls for over 25 years. Their product offering includes a wide variety of controls and sensors for indoor and outdoor applications.


        The IR VS 2 is a line voltage, two relay, Passive Infrared (PIR) wall switch vacancy (manual ON) sensor intended to control bi-level lighting in commercial spaces. PIR is used where the sensor will have a clear view of the occupants in the desired coverage area. The convenient “Switch Link” feature enables up to four sensors to link together for peer to peer grouping achieving expanded detection zones and multiway switching.

        The typical application is for bi-level switching in small office, conference, and break rooms where vacancy control (manual ON only) is desired. For best performance use this sensor in enclosed spaces no larger than 18’ x 15’.

        For additional information and resources, please visit http://www.steinel.net/IR_VS_2.

         
        Key Features
        • PIR (passive infrared) wall switch vacancy sensor
        • Bi-level load switching (2 relays)
        • Line voltage lighting control (120/230/277 VAC, 50/60 Hz)
        • 180° coverage pattern
        • Manual ON automatic OFF
        • Re-trigger feature allows the load to turn back ON automatically if motion is detected within 30 seconds after it has automatically switched OFF the load
        • Mounts to a single-gang NEMA-style, standard switch box & decorator-style wall plate by others
        • “Switch Link” communication allows for up to 4 sensors to be grouped together
        • IQ Mode dynamically adjusts the ‘ON’ time delay by learning individual room occupancy
        • Walk through mode option will switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds
        • Audible alert feature provides an audible warning that the load will shut-OFF in 10 seconds unless additional motion is detected
        • Visible alert feature provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected
        • Service mode option deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF button

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

        Steinel products are covered under Steinel’s 5 year warranty. Crestron provides no further warranty. Service and support shall be provided by Crestron to Crestron authorized dealers that have purchased Steinel products through Crestron.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2018 Crestron Electronics, Inc.

         
          Voltage 120/230/277 VAC, 50/60 Hz
          Load Rating (Per Relay) tungsten, magnetic or electronic ballast: 0-800 watts @ 120/230/277 VAC, 50/60 Hz;
        CFL or LED electronic ballasts: 0-600 watts @ 120/230/277 VAC, 50/60 Hz;
        1/6 hp @ 120/230/277 VAC, 50/60 Hz
          Sensing Technology passive infrared (PIR)
          PIR Coverage at 1.2 m / 4 ft Mounting Height 180 degree coverage pattern;
        minor motion: max. 6.5 x 5.5 m (36 sq.m.), max. 21 x 18 ft (378 sq.ft.);
        radially: max. 7 m (77 sq.m.) 24 ft (904 sq.ft.);
        tangentially: max. 20 m (628 sq.m.) 54 ft (4,500 sq.ft.)
          Time Setting IQ/Test, 5, 15, 30 minutes;
        IQ Mode: Dynamically adjusts the 'ON' time delay by learning individual room occupancy;
        Test Mode: Time delay defaults to 5 seconds and all loads are switched on/off by motion detection; After 5 minutes the time delay reverts to the IQ Mode
          Dip Switch Settings Walk Through Mode: Switch the load OFF in 3 minutes if no additional detection occurs after the first 30 seconds;
        Audible Alert: Provides an audible warning that the load will shut-OFF in 10 seconds unless additional motion is detected;
        Visible Alert: Provides a momentary OFF/ON blink, warning that the load will shut OFF in 10 seconds unless additional motion is detected
          Service mode Deactivates the automated functions of the sensor and the load is only manually controlled using the ON/OFF button
          Switching Performed at, or close to the zero-cross of the AC waveform in order to improve relay performance
          Switch Link Allows communication of sensors for 2-way, 3-way, and 4-way switching
          Real-time motion indicator LED Visible from the front of unit while in test mode
          Environment IP20 rated, 0°C to +40°C, 32°F to +104°F
          Mounting single-gang NEMA-style switch box (standard switch box) & decorator-style wall plate by others
          Dimensions 105 x 44.1 x 45.1 mm, 4.13 x 1.74 x 1.78 in, (LxWxD)
          Certifications C-UL-US Listed, RoHS compliant, California compliant

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

        Steinel products are covered under Steinel’s 5 year warranty. Crestron provides no further warranty. Service and support shall be provided by Crestron to Crestron authorized dealers that have purchased Steinel products through Crestron.

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2018 Crestron Electronics, Inc.