Products

    Pages

        CLW-DIMFLVEX-277-P-A-S

        In-Wall 0-10V Dimmer, 277V, Almond Smooth

        The CLW-DIMFLVEX-277-P is a Cameo® in-wall dimmer that delivers native Crestron® control to 0-10V dimmable fixtures or switched loads in new or retrofit 277 Volt applications. It features engravable and field-customizable buttons and wireless infiNET EX® communications.
         
        Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

        The CLW-DIMFLVEX-277-P is a Cameo® in-wall dimmer that delivers native Crestron® control to 0-10V dimmable fixtures or switched loads in new or retrofit 277 Volt applications. Along with the entire line of Cameo products, it features field-replaceable, engravable buttons and can be configured with various button layouts and designer colors, making the CLW-DIMFLVEX-277-P a versatile and affordable lighting control solution. In addition to its streamlined design and attractive look and feel, this dimmer can be installed in virtually any location.  The mesh-networking topology of infiNET EX® communications brings proven reliability to the CLW-DIMFLVEX-277-P.

        Field-Replaceable and Engravable Buttons
        The CLW-DIMFLVEX-277-P features engravable buttons that can be swapped out in the field. Change of room décor or functionality is easy to handle long after the dimmer or switch has been installed. The rocker switch brings a familiar user interface to the Crestron in-wall dimmer, while the versatility of up to 4 buttons takes advantage of prime single-gang wall box real estate; use buttons to control in-room audio or lamps in addition to any other light connected to the system. The comprehensive list of designer colors blends the CLW-DIMFLVEX-277-P into virtually any décor and style, suiting even the most exquisite space.

        Integrated Keypad
        Because the CLW-DIMFLVEX-277-P is attached to the Crestron network, it can also function as a keypad, sending commands to trigger whole-room lighting scenes or distributed audio functions. Supporting up to four buttons, the in-wall dimmer or switch serves as a great user control interface in any Crestron system. Its single-box form factor maximizes control capability in a small space while increasing the opportunity for Crestron control in every room.

        infiNET EX
        Ultra-reliable infiNET EX wireless technology provides steadfast two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.[1]

        The CLW-DIMFLVEX-277-P communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-GWEXER, DIN-AP3MEX, or MC3[2]). Up to 100 infiNET EX devices may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths.[1] Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves.

        Streamlined Installation
        In addition to field replaceable buttons, the CLW-DIMFLVEX-277-P features screw-clamp connectors for simplified wiring while reducing installation time and material costs. So slim, the CLW-DIMFLVEX-277-P can be installed in standard gang boxes making them the perfect choice for both new and retrofit projects. 

         
        Key Features
        • 0-10V dimming control
        • Field-replaceable and engravable buttons
        • Available in a variety of finishes
        • infiNET EX® robust communications
        • Models popular Cameo® style
        • Configurable for up to four buttons
        • Matching aesthetics across the entire line
        • Screw-clamp connectors for easy installation
        • Stylish bargraph LED array provides real-time status feedback
        • CEC Title 24 2013 Compliant
        1. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices do not provide expander functionality. A dedicated infiNET EX Wireless Expander, model CLW-EXPEX or GLA-EXPEX, is also available.
        2. Item(s) sold separately.
        3. A neutral wire is required for normal operation.  Refer to the Installation Guide for alternate wiring configurations.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, 3-Series, 3-Series Control System, Cameo, Cresnet, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.

         
        Load Ratings
          Maximum Load 5 Amps, mechanically latching relay
          Dim Load Types 0-10 Volt fluorescent ballast or LED driver (4-wire)
          Dim Control Output 0-10 Volts DC 60 mA sink/source
          Switch Load Types Incandescent, ELV, MLV, fluorescent ballast, HID
        Power Requirements
          277 Volts AC, 50/60 Hz, line power;
        Dedicated neutral wire required
        Controls
          Buttons 1-4 Configurable for 1 large rocker switch or 1 to 4 single-action pushbuttons;
        Programmable via control system
          Dimming Ramp Rate 5 seconds (default), software adjustable 0.01 to 10 seconds
          Preset Fade Time 2 seconds (default), software adjustable 0.01 to 120 seconds
        LED Indicator
          Feedback (7) White LEDs
          Bargraph (1) 7-segment bargraph display utilizing the 7 feedback LEDs
        Wireless Communications
          RF Transceiver infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
          Range (Typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities[1]
          Gateway Requires an infiNET EX gateway[2]
        Connections
          Line In (1) 16 AWG flying lead, black
          Neutral (1) 16 AWG flying lead, white[3]
          Ground (1) 16 AWG flying lead, green
          SW/Dim Out (1) 16 AWG flying lead, red
          Dim + (1) 16 AWG flying lead, purple
          Dim - (1) 16 AWG flying lead, gray
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          1-gang mountable in a 3.5 in (89 mm) deep electrical box;
        Requires decorator style faceplate (not included)
        Dimensions
          Height 4.13 in (105 mm)
          Width 1.75 in (45 mm)
          Depth 1.80 in (46 mm)
        Weight
          5 oz (142 g)
        Standards & Certifications
          UL Listed
          CEC Title 24 2013 Compliant
        1. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices do not provide expander functionality. A dedicated infiNET EX Wireless Expander, model CLW-EXPEX or GLA-EXPEX, is also available.
        2. Item(s) sold separately.
        3. A neutral wire is required for normal operation.  Refer to the Installation Guide for alternate wiring configurations.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, 3-Series, 3-Series Control System, Cameo, Cresnet, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.