Products

    Pages

        GL-IPAC-SW8

        Crestron Green Light® Integrated Switching System

        The GL-IPAC-SW8 switching panel provides internal controls for 8 circuits of switched load and is expandable to support up to 64 circuits of switched load by adding external panels and switching modules. It features local inputs for sensors and keypads, along with a LCD user interface where installers or users can set up the system without having to connect to a computer.
         

        The GL-IPAC-SW8 switching panel provides internal controls for 8 circuits of switched load and is expandable to support up to 64 circuits of switched load by adding external panels and switching modules. It features local inputs for sensors and keypads, along with a LCD user interface where installers or users can set up the system without having to connect to a computer.

        The GL-IPAC-SW8 is perfect for smaller-sized installations, such as retail stores, small office spaces, parking garages, and service stations, which typically require only on/off switching—eliminating the need for a larger, more expensive panel. In addition, the GL-IPAC-SW8 can be easily integrated with Crestron automation solutions, for centralized monitoring and remote control of multiple locations.

        Out-of-the-Box Lighting Control

        The GL-IPAC-SW8 comes preconfigured for use as the central control processor for a Crestron Green Light® Power Switching system. Right out of the box, the GL-IPAC-SW8 affords easy setup and programming for a complete switching system consisting of up to 64 switched loads, 16 local and two remote keypads, 24 occupancy and photo sensors, and 100 time clock events.

        Keypads with as many as 12 buttons each can be programmed easily to control lighting loads and other functions. Lights can be programmed to turn on and off automatically using the built-in astronomical time clock feature. Lighting events may be programmed to occur at specific times or at an offset from sunrise or sunset. Occupancy sensors and photo sensors may also be implemented to enable automatic on/off lighting control based on room occupancy and ambient light levels.

        Save Energy

        Built-in support for occupancy and photo sensors helps to strike a perfect balance between daylight harvesting and comfort, reducing energy costs. Automatically turn off lights in unoccupied areas and maintain balanced bulb brightness with the natural light level in the room. Crestron® GLS sensors can be placed strategically in each space to maximize the benefits of energy management.

        Easy Deployment

        Packaged in one metal enclosure, the GL-IPAC-SW8 can be deployed in small spaces, including plenum ceilings. The surface-mount GL-IPAC-SW8 can be affixed to a wall or ceiling rafter, cleanly out of sight. Standard wire-entry knockouts are provided.

         
        Key Features
        • 8 internal circuits for switched loads
        • Expandable to control up to 64 circuits of switched load
        • Supports 100 to 277 Volt applications
        • 16 Amp load rating per channel
        • Built-in astronomical time clock
        • Positive air gap at each output
        • Phase-independent channels
        • Local controls for setup, testing, and verification
        • Local and remote override capability
        • Non-volatile power failure memory
        • Easy access is facilitated from the hinged front cover
        • CEC Title 24 2013 Compliant

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, Cameo, Cresnet, Crestron Green Light, Crestron Toolbox, and Crestron Green Light Express are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc.

         
        Load Rating
          Switched Channels 8 internal; expandable up to 64 by adding external panels and modules
          Per Channel 16 Amps @ 120 to 277 Volts AC, 50/60 Hz
          Switched Load Types Flourescent Ballast, Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode, High-Intensity Discharge, LED, Motor
          Relay Lifetime Resistive rating: 100,000 on/off operations, 50A @ 277 VAC; General rating: 50,000 on/off operations, 16A @ 120/277 VAC
        Power Requirements
          Main Power 100-277 Volts AC, 50/60 Hz, via channel 1 (LINE 1, NEUT)
          Available Cresnet Power 15 Watts at 24 Volts DC
        Connectors (Class 1)
          NEUT (2) terminal blocks, paralleled, line input neutral
          LINE 1 - LINE 8 (16) terminal blocks; 2 connections per channel, paralleled, allows for easy daisy-chaining; line power inputs
          SW1 - SW8 (8) terminal blocks, switch channels outputs
        Connectors (Class 2)
          CRESNET (1) 4-pin 3.5mm terminal block; a maximum of 10 GLS-SIMs may be connected via the Cresnet® terminal block for occupancy sensors and a maximum of 10 GLS-SIMs for photo sensors; up to 20 occupancy sensors may be supported (10 external Cresnet sensors and 10 external, non-system sensors connected to Cresnet via GLS-SIM); up to 20 photo sensors may be supported (10 external, non-system sensors wired directly to a Cresnet occupancy sensor and 10 external, non-system sensors wired to a GLS-SIM using Cresnet)
          OVR (1) 2-pin 3.5mm terminal block, comprising (2) inputs for external contact closures to trigger the preset Override state
          CONTACT CLOSURES (1) 9-pin 3.5mm terminal block comprising (8) contact closure inputs and (1) GND port
          SENSOR INPUT 1-4 (1) 6-pin 3.5mm terminal block comprising (4) sensor inputs for internal, non-system occupancy sensors, (1) +24VDC, and (1) GND port (provides sensors with power)
          SENSOR INPUT 5-8 (1) 6-pin 3.5mm terminal block comprising (4) sensor inputs for internal, non-system photo sensors, (1) +24VDC, and (1) GND port (provides sensors with power)
          USB (1) USB Type B console port, for communication with Crestron Toolbox™
          LAN (1) 8-wire RJ45 with 2 LED indicators; 10/100BaseT Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity
        LED Display
          Green LCD dot matrix, 128x64 resolution, adjustable LED backlight
        Controls & Indicators
          SELECTION BUTTONS (2) push-button, adjust menu parameters
          ENTER (1) push-button, selects underlined item and stores settings
          HOME (1) push-button, returns to the home page
          BACK (1) push-button, returns to the previous page
          CANCEL (1) push-button, cancels current action without saving
          HELP (1) push-button, opens context-sensitive help screen
          Soft Keys (4) push-buttons for activation of LCD driven functions
          PWR (1) Green LED; solid illumination indicates line power is applied to NEUT and LINE1
          HW-R (1) Recessed miniature push-button for hardware reset (reboots the processor)
          SW-R (1) Recessed miniature push-button for software reset (restarts the program)
          OVR (1) Red LED and (1) miniature push-button for enabling override mode
          ON/OFF (8) Red LEDs and (8) miniature push-buttons for individual manual channel activation
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
        Dimensions
          Height 12.13 in (308 mm)
          Width 14.13 in (359 mm)
          Depth 4.06 in (104 mm)
        Standards & Certifications
          UL Listed Enclosure
          CEC Title 24 2013 Compliant

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, Cameo, Cresnet, Crestron Green Light, Crestron Toolbox, and Crestron Green Light Express are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc.