Products

    Pages

        CLCI-DIMUEX-W

        Wireless In-Ceiling Dimmer, 230VAC

        Compact in-ceiling universal dimmer, equipped with remote input port for control via standard light switches. Wireless infiNET EX™ technology connects the CLCI to a Crestron control system for complete lighting control.

        The CLCI-DIMUEX-W is a universal dimmer capable of dimming 230 VAC lighting loads. Its ultra-slim design allows it to be installed in the ceiling, next to or near the fixture. Powered by infiNET EX™ technology, the CLCI device communicates wirelessly with the Crestron control system, making it perfect for both new and retrofit applications. Best of all, the CLCI installs inline without requiring any special wiring and can be controlled via a standard light switch.

        Universal Dimming

        The CLCI-DIMUEX-W supports dimming incandescent, tungsten-halogen, magnetic low voltage, electronic low voltage and dimmable CFL loads. Load detection circuitry automatically determines forward- or reverse-phase dimming mode. Two sets of screw terminals enable easy wiring to more than one load of up to 300 W/VA.[1]

        Easy Loop-Thru Wiring

        Feeding each CLCI is a set of terminals used to power the unit. A second set of high-voltage terminals wired in parallel allow for a fast, clean installation when deploying multiple CLCI units. No need for wire connectors or extra gang boxes; just "daisy chain" multiple CLCIs together. In certain retrofit applications, this lets you create more zones from what was originally wired.

        Out-of-the-box Control via Standard Switch

        The CLCI provides built-in support for load control via a maintained or momentary switch. Applications that require basic on/off control will benefit by using a typical cost-effective switch. A momentary push-button type switch can be used for cost-effective dimming control; tapping turns the connected loads on and off, while holding the button dims the loads up or down.

        Complete Crestron Control

        Because it's connected to the Crestron system, the CLCI can also be controlled from any keypad, touch panel, remote, or mobile device. Tie in occupancy sensors and photocells together with Crestron RoomView® software for a complete solution to effectively manage energy.

        Simple Setup

        Setup is simple, especially when using a connected maintained or momentary switch. A specific series of button presses initiates the wireless device acquire mode, so there's no need to climb a ladder to join the device to the infiNET EX network.

        infiNET EX™ Communications

        Built on steadfast infiNET™ technology, infiNET EX is the new standard in 2-way wireless connectivity. So robust, infiNET EX can handle installations in even the most urban settings. The redundant nature of its mesh networking technology means that a command will never be missed, resulting in faultless operation - something that is of the utmost importance when it comes to lighting control and building automation. The CLCI-DIMUEX-W harnesses this cutting edge wireless connectivity which affords it a level of robustness and dependability above other solutions.

         
        Key Features
        • Compact universal dimmer deploys easily in new or retrofit applications
        • Allows Crestron control of any lighting fixture
        • No special wiring—installs inline at the fixture
        • Maximum 300 W/VA load capacity
        • Reliable wireless communication using infiNET EX™ mesh network
        • technology
        • Local controls for testing and maintenance
        • Built-in support for control via standard momentary or maintained switch
        • Setup via on-board button or connected switch
        • Daisy-chain units for easy deployment
        • Operates across voltage range of 220-240 VAC
        1. The CLCI-DIMUEX-W provides two connection points for ease of wiring to multiple fixtures. Both sets of connectors are internally wired in parallel.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, infiNET, infiNET EX and Crestron RoomView are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States, other countries or both. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.

         
        Pyng
        Load Ratings
          Number of Channels 1
          Maximum Load per Channel 300 W/VA
          Load Types Incandescent, tungsten-halogen, magnetic low voltage, electronic low voltage, dimmable CFL
        Input Voltage
          220 to 240 Volts AC, 50/60Hz Line Power
        Wireless
          RF Transceiver 2-way, 2.4 GHz ISM channels 11-26 (2400 to 2483.6 MHz), IEEE 802.15.4 compliant
          Range 30 m (100 ft) indoors, 55 m (175 ft) outdoors for device to device;
        45 m (150 ft) indoors, 75 m (250 ft) outdoors for device to gateway;
        all distances subject to site specific conditions
          Gateway Requires a CEN-RFGW-EX gateway, MC3, PMC3-XP or PMC3
        Connectors
          L (3) Screw terminals for connecting to line AC; internal wiring in parallel
          N (2) Screw terminals for connecting to neutral AC; internal wiring in parallel
          G (2) Screw terminals for connecting to earth ground; internal wiring in parallel
          R (1) Screw terminal for connecting to remote switch (remote switch wires to L and R; consult manual for more information)
          N (2) Screw terminals for neutral, internal wiring in parallel
          DIM (2) Screw terminals for dimmer output, internal wiring in parallel
        Controls & Indicators
          Setup (1) Miniature pushbutton for joining an infiNET EX network
          On (1) Green LED, indicates load is on
          Off (1) Green LED, indicates load is off
        Enclosure
          Plastic
        Environmental
          Temperature 0° to 40°C (32° to 104°F)
          Humidity 10% to 90% RH (non-condensing)
        Dimensions
          Height 178 mm (7 in)
          Width 55 mm (2.13 in)
          Length 41 mm (1.63 in)
        Weight
          189 g (6.7 oz)
        1. The CLCI-DIMUEX-W provides two connection points for ease of wiring to multiple fixtures. Both sets of connectors are internally wired in parallel.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, infiNET, infiNET EX and Crestron RoomView are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States, other countries or both. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.

        Online Help

        RF/Wireless Best Practices Guide
        Online Help Answer ID :4742