Products

    Pages

        CLS-EXP-DIMFLV

        iLux® 0-10V Dimmer Expansion Module

         

        • Works with Crestron iLux®, CLW,[1] and CLX Series dimmers
        • Emulates the characteristics of the dimmer that is controlling it

        Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

         

        The CLS-EXP-DIMFLV is a 0-10 Volt dimming expansion module for the Crestron iLux® Integrated Lighting System (CLS-C6 Series) and other Crestron® lighting dimmers. It can also be used to switch non-dimmable loads. A single model supports a 120, 230, or 277 Volt load up to 16 Amps.

        Any output channel of the iLux system can be used to control the CLS-EXP-DIMFLV. It is also compatible with CLW Series[1] in-wall dimmers and select CLX Series lighting control modules.[2] The metal enclosure is designed to be mounting to a vertical surface,[3] and it can be installed in an environmental air-handling space above a suspended ceiling. Conduit knockouts are provided on the bottom and lower sides of the unit. All connections are made via screw terminals behind the front cover.

         
        Key Features
        • Works with Crestron iLux®, CLW,[1] DIN, and CLX Series dimmers
        • Emulates the characteristics of the dimmer that is controlling it
        • Shares a single iLux dimmer channel with up to 4 more Expansion Modules
        • Provides 0-10 Volt dimming control
        • Supports 120, 230, or 277 Volt loads up to 16 Amps
        • Supports switching of non-dimmable lighting loads and motors
        • Includes built-in air gap relay
        • Mounts to a wall or above a suspended ceiling
        • CEC Title 24 2013 Compliant
        1. CLW Series device must have a dedicated neutral.
        2. Compatible only with forward-phase dimming modules.
        3. Must be oriented upright, mounted to a vertical surface, with 6 inches (153 mm) minimum spacing above and below for proper ventilation and heat dissipation.
        4. Captive screw terminals accept up to two 22 to 12 AWG (0.34 to 4.0 mm2) wires per terminal.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, and iLux are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Load Ratings
          Dimmer Channels 1
          Load Rating, Lamp 16 Amps @ 120 to 277 Volts
          Load Rating, Motor

        0.5 HP @ 120 Volts, 1 HP @ 230/277 Volts

          Minimum Load 15 Watts @ 120 Volts, 25 Watts @ 230 Volts, 30 Watts @ 277 Volts
          Dim Load Types 0-10 Volt fluorescent ballast or LED driver (4-wire)
          Switch Load Types LED, incandescent, fluorescent, magnetic low voltage, electronic low voltage, neon/cold cathode, high-intensity discharge (HID), motors
        Input Voltages
          Line Power 120 to 277 Volts AC, 50/60 Hz
          Control Input 120 or 230 Volts AC, 50/60 Hz, phase independent of line power and load
        Connections
          INPUT, CTRL (1) Captive screw terminal,[4] control input from CLS(I)-C6 Series, CLW-DIM Series,[1] CLXI)-DIM Series, GLX-DIM6, GLXX-2DIM8, DIN-1DIM4, or DIN-1DIMU4 dimmers;
        Note: Presents a 25 Watt load to the controlling dimmer; a maximum of 5 CLS-EXP-DIMFLV modules may be connected to the controlling dimmer, which cannot be wired to control any other loads besides the CLS-EXP-DIMFLV modules
          INPUT, NEUT (1) Captive screw terminal,[4] neutral connection for control input
          OUTPUT, SW OUT (1) Captive screw terminal,[4] switched load output
          OUTPUT, HOT (1) Captive screw terminal,[4] line power input
          OUTPUT, NEUT (1) Captive screw terminal,[4] neutral connection for line power input and load
          0-10V +/- (2) Captive screw terminals,[4] dimming control output;
        Class 1 or Class 2 wiring allowed;
        Control Voltage is 0-10 Volts DC, 70 mA
          GROUND (1) 3-terminal chassis ground bus bar
        Controls & Indicators
          STATUS (1) Red LED behind front panel, illuminates when load output is on
          POWER (1) Green LED behind front panel, indicates line power is applied to the HOT terminal
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 70 BTU/Hr at maximum load, 16A
        Enclosure
          Surface mount[3] module with (2) integral mounting flanges, galvanized steel w/gray matte powder coat front panel, extruded aluminum heat sink, and (4) 1/2” or 3/4” conduit knockouts provided on bottom and lower left & right sides
        Dimensions
          Height 8.82 in (224 mm)
          Width 6.39 in (163 mm)
          Depth 3.18 in (81 mm)
        Weight
          3.34 lb (1.52 kg)
        Standards & Certifications
          UL Listed
          CEC Title 24 2013 Compliant
        1. CLW Series device must have a dedicated neutral.
        2. Compatible only with forward-phase dimming modules.
        3. Must be oriented upright, mounted to a vertical surface, with 6 inches (153 mm) minimum spacing above and below for proper ventilation and heat dissipation.
        4. Captive screw terminals accept up to two 22 to 12 AWG (0.34 to 4.0 mm2) wires per terminal.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, and iLux are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.