Products

    Pages

        GLS-PART-CN

        Cresnet® Partition Sensor

        Surface-mount partition sensor with Cresnet® power and communications.

        The GLS-PART-CN is a sleek, surface-mount partition sensor that utilizes the dependable Cresnet® wired network for power and communications. Designed with hospitality environments in mind, this easily installed sensor uses an infrared (IR) beam to sense the position of movable partitions within a space. The IR beam’s signal strength is adjustable and features a sensing distance of up to four feet, making the GLS-PART-CN a versatile partition sensor with optimized sensing accuracy. Three LEDs on the unit provide at-a-glance information on the sensor’s state of power, communications, and partition detection. The GLS-PART-CN offers mounting options for rooms with finished or droptile ceilings.

        The GLS-PART-CN has plug-in outputs and built-in time delays. Also, the partition sensor easily connects via Cresnet® to a Crestron control processor to manage divisible room environments.

        Cresnet

        The GLS-PART-CN uses the dependable Cresnet wired network for communication between devices. Cresnet provides a simple solution for configuring and wiring sensors as part of any complete Crestron system. Cresnet is the communications backbone for Crestron lighting dimmers, keypads, shades, thermostats, and many other devices. This flexible 4-wire bus provides data communications and 24 Volts DC power for all of the devices on the Cresnet network.

        Versatile Installation

        The GLS-PART-CN has a white finish and can mount directly into finished ceilings. For droptile ceilings, the GLS-PART-CN installs into a 1-gang, 3-1/2 inch deep electrical box. In both instances, a decorator-style faceplate[1] can be used to match the GLS-PART-CN with the color of the room. Only about 20 mm of the GLS-PART-CN is visible after installation, making it an unobtrusive addition to a room.

        Digital Output

        This sleek sensor delivers unparalleled versatility through an additional output on the terminal block, which can be used as an alternate method of integration with a Crestron Control System® or other system. The 5th pin of the Cresnet connector provides either a 24 Volt, 10 mA output or a closure to ground, perfect for connection with a Versiport or digital input port.

         
        Key Features
        • Sleek, compact design
        • Adjustable infrared beam for high accuracy
        • Sensing distance of up to 4 feet
        • Cresnet® for power and communications
        • Crestron® control system integration via Cresnet
        • Digital output provides either a 24 Volt, 10 mA output or a closure to ground
        • Visible LED display that indicates sensor status
        1. Sold separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Cresnet, and Crestron Control System are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Sensing
          Method of Detection Diffuse Reflective
          Light Source Pulse modulated infrared LED
          IR Sensitivity Adjustable
          Sensing Distance 4 ft (122 cm)
        Connectors
          NET/EXT (1) 5-pin 3.5mm detachable terminal block;
        Cresnet® slave port and digital output port;
        Digital Output: Provides either 24 Volts DC, 10 mA (default) or a closure to ground when partition is detected
        Controls & Indicators
          PWR (1) Green LED, indicates power is supplied to device; flashes to indicate sensitivity level
          NET (1) Yellow LED, indicates Cresnet communication status
          ALIGN (1) Red LED, indicates partition detection
          + (1) Pushbutton, used to increase sensitivity of IR beam; also used for touch-settable ID (TSID)
          - (1) Pushbutton, used to decrease sensitivity of IR beam; also used for touch-settable ID (TSID)
        Power Requirements
          Current Consumption 42 mA @ 24 Volts DC
          Cresnet Power Usage 1 Watt
        Environmental
          Temperature -13° to 131° F (-25° to 55° C)
        Housing
          Construction Plastic
          Mounting Surface mount; 1-gang mountable in a 3-1/2 inch deep electrical box, fits decorator-style faceplate
        Dimensions
          Height 2.23 in (57 mm)
          Width 4.16 in (106 mm)
          Depth 1.35 in (34 mm)
        Weight
          3.32 oz (94 g)
        1. Sold separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Cresnet, and Crestron Control System are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.